Has anyone found one that works with 3T? I just received my TruSheild Ultra Clear and it's a joke. I need to find another one that actually fits.
Attachments
Last edited:
Tempered Glass Screen Protector
- Thread starter ghettopops
- Start date
OnePlus 3 / OnePlus 3T Screen Protectors, TWIN PACK of Orzly 2.5D Pro-Fit V2 Tempered Glass Screen Protector for Original 2016 Model Oneplus THREE & OnePlus 3T Version - Transparent with BLACK Rim https://www.amazon.co.uk/dp/B01LWOYYYZ/ref=cm_sw_r_cp_apa_VRjpybVYKVJ8M
Watched a few videos on this one to see if cases interfere with the edges but they dont.
Ordered from American Amazon lol. Thanks for the heads up. Think I saw this one before but was weirded out by the blacked out top and bottom. Just want a decent Protector.
Last edited:
I have a similar protector to that orzley, black rim too, but sports a different brand.
It's what it you think, glass surface, covers the front of the phone, leaves just enough for a case. The only problem or non problem depending on how you look at it, is if you line up the home button with the top speaker and front camera, then it partially covers up the navigation buttons, and completely covers up the notification LED. I typically have these turned off anyway, but it bothers me a little that the cutouts aren't exact. If someone can tell me they are, then I'll buy me some as well.
It's what it you think, glass surface, covers the front of the phone, leaves just enough for a case. The only problem or non problem depending on how you look at it, is if you line up the home button with the top speaker and front camera, then it partially covers up the navigation buttons, and completely covers up the notification LED. I typically have these turned off anyway, but it bothers me a little that the cutouts aren't exact. If someone can tell me they are, then I'll buy me some as well.
Let us know how the orzly v2 protector is like, as I have heard it's the best out there for 3/3t
Buddy got the OnePlus Tempered and it looks worse than mine for sizing.
I agree I ordered one from one plus thinking they would have the right fit and finish, well I was wrong have a 2mm gap on both sides.... Smh way to go one plus
Sent from my ONEPLUS A3000 using Tapatalk
Sent from my ONEPLUS A3000 using Tapatalk
In a lot of revies people mention a rainbow effect with the v2, because the glue is only on the side of the tempered glass.
Do you have that issue as well?
No. The only think is the dot matrix in direct sunlight but i can leave with that
Have found the exact same problem from a few manufacturers.
Here is a quick image of one that I took, I believe this is an iTec 9H.
Not sure if you can see but it is laid over the top of the one that comes on the 1+3T as default.
hxxps://drive.google.com/file/d/0B0tJilDJmoKXWUtndllyTmpXVEU/view?usp=sharing
Here is a quick image of one that I took, I believe this is an iTec 9H.
Not sure if you can see but it is laid over the top of the one that comes on the 1+3T as default.
hxxps://drive.google.com/file/d/0B0tJilDJmoKXWUtndllyTmpXVEU/view?usp=sharing
Can anyone confirm if the Orzly v2 will fit/play nice with a Rhinoshield bumper?
I'm using the Orzly v2. It's the closest you will get to a perfect full screen tempered glass with no lift when using a case or changing cases. Yes it has dot matrix in certain angles, and the rainbow effect is very minimal. It's a lot better than the other ones I tried.
Last edited:
@charlieb620 Thanks, just received mine today. I can confirm that the fit is most excellent on phone and works well with Ringke Fusion Clear. I will also say that the rainbow effect is present and most visible with screen off. It is basically where I would swipe when browsing and swiping up and down(right side centerish) Seems like its a patch of Glass not sticking and swirls when I press down on it.
Am I the only one who hates screen protectors, which don't stick entirely?
It makes the screen look really really bad. Is there no screen protector, which doesn't have black bars, has epoxy all around and doesn't feature huge gaps on the sides?
It makes the screen look really really bad. Is there no screen protector, which doesn't have black bars, has epoxy all around and doesn't feature huge gaps on the sides?
Whats the side profile like?
I have a protector that looks similar, however somehow dust has managed to find itself under the screen, well after it was perfectly applied. I was a fool to remove the protector that came standard with the 3T
I have a protector that looks similar, however somehow dust has managed to find itself under the screen, well after it was perfectly applied. I was a fool to remove the protector that came standard with the 3T
Orzly v2
Pro
Excellent cut
Look nice
Con
Matrix Screen off
Screen is brigh when off
Stick only on edges
Pro
Excellent cut
Look nice
Con
Matrix Screen off
Screen is brigh when off
Stick only on edges
New posts
-
-
[MODULE] MagiskHide Props Config - SafetyNet, prop edits, and more - v5.4.0- Latest: Didgeridoohan
-
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone