Hardware Development TEYES CC3

[iroxxx]

You need to connect your cars illumination/headlight wire to pin 4 of the power connector on your CC3

this wire is connected to the can decoder, so I think it should work through can, but it doesn't work ...

 

[JMM44700]

Guys, after A LOTTTTTTTTTTTTTTTTT of time, dissasembling the rear gate and assembling (more than 4 times), I finally got my reverse camera to work (both, while driving and while reversing)...BUT I get some flickering.

I ran all the cable from the headunit to the back of my Subaru Forester cargo door, at the end i was short in cable for like 30 cm (1 foot).
So I used another extra 5 meters (and joined them together), the grand total was about 10 meters (30 ft),
I'm getting some random flickering, could it be because of the lonnnnnng cable union? I had no flickering with the first cable (neither with the union), until i assemblied everything, perhaps tying a long cable up create some interference?

View attachment 5867445

Should i buy a 1 or 2 ft cable and remove the long 5mtrs extra i connected? The problem is that disassembly all the cargo again....

P.S.
It's NOT the ground issue some of you guys are having.

No, no need to change to a single cable, it would rather be a ground loop. It is necessary to avoid having a cable to my ground on both sides. Check!

 

[donxuan1983]

Hi guys, tried to search answer in this thread but no luck... I installed cc3 in 2012 Jeep GC Srt8 with premium HK sound system... Everything works pretty well, only subwoofer has completely no sound.

Anyone experienced similar problem?

 

[giallorosso84]

Hello community!

Here I have a 2016 ford edge, I'm already familiar with the Teyes head units but I still have some questions if I were to get one for my edge.
For example, the options of lane departure warning, sign reading, pre-collision warning are displayed on the dashboard (also I have a simplified GPS replication and a music player replication).
The question is : if I put a CC3 teyes do I keep these options or do they necessarily depend on the my ford sync2?
Ideally I'm looking for someone who has replaced their sync2 my ford with a teyex to find out... if anyone here has this can you please let me know?

Thanks !

 

[Panamanian]

No, no need to change to a single cable, it would rather be a ground loop. It is necessary to avoid having a cable to my ground on both sides. Check!

You didnt read my last line. P.S. right?

 

[JMM44700]

Vous n'avez pas lu ma dernière ligne. PS non ?

?????

 

[uremine12]

Hi guys, it is a normal behaviour that my CC3 leaves the apps in the recent apps list after wake up? So if i open Chrome for example and then the unit goes to sleep, then when i wake it up, Chrome is still in the recent apps list.
(I had NoKill through UDT Manager, and i checked only one app to not kill, but i removed it, factory reseted, then reflashed, rebooted etc...)
Anyone has the same problem? Thanks

 

[j0hn83]

Hi guys, it is a normal behaviour that my CC3 leaves the apps in the recent apps list after wake up? So if i open Chrome for example and then the unit goes to sleep, then when i wake it up, Chrome is still in the recent apps list.
(I had NoKill through UDT Manager, and i checked only one app to not kill, but i removed it, factory reseted, then reflashed, rebooted etc...)
Anyone has the same problem? Thanks

Why is it a problem?
Yes it's perfectly normal.

 

[uremine12]

Why is it a problem?
Yes it's perfectly normal.

But i read in another thread thats about the Joying headunit, that it kills all apps when it goes to sleep. The NoKill functionality is that it doesn't kill apps when the unit goes to sleep, right? And i deleted the NoKill via reflash. But the apps still remain after sleep.

 

[uremine12]

Why is it a problem?
Yes it's perfectly normal.

So its after deep sleep, that the apps remain there, shouldn't the headunit close them in deep sleep, when i don't have NoKill? Thanks!

 

[Panamanian]

In FACTORY setting (I think) there's an option where you can start with your last used app ORRRRR the main theme app) give it a try and see if it helps / kills the recently used app after a boot /wake up.

 

[uremine12]

In FACTORY setting (I think) there's an option where you can start with your last used app ORRRRR the main theme app) give it a try and see if it helps / kills the recently used app after a boot /wake up.

Thanks i tried it but it didn't help. I cannot understand how the NoKill could be still active when i reflashed the firmware multiple times with twipe_all, multiple versions etc...

 

[mastrv]

@uremine12 I think your confusing the app and the recent app. If you sleep your head unit instead of a full off, it will retain a list of what was most recently opened. The app may or may not close, but when the unit wakes up from sleep it will still remember what it was doing before going to sleep. So, I think it's working normally and nothing to go crazy about

 

[Panamanian]

@uremine12 I think your confusing the app and the recent app. If you sleep your head unit instead of a full off, it will retain a list of what was most recently opened. The app may or may not close, but when the unit wakes up from sleep it will still remember what it was doing before going to sleep. So, I think it's working normally and nothing to go crazy about

Yes, imagine that like a tablet, where you have any app running and then you lock it, then you unlock it. They're still gonna be running (most of them).

 

[uremine12]

@uremine12 I think your confusing the app and the recent app. If you sleep your head unit instead of a full off, it will retain a list of what was most recently opened. The app may or may not close, but when the unit wakes up from sleep it will still remember what it was doing before going to sleep. So, I think it's working normally and nothing to go crazy about

Yeah, but its also doing things that it should do with NoKill, like after sleep the radio always continues to play, so it didn't kill that, on top of that it is not loading the Navi app, its already loaded, its in the memory, it should kill all of these apps after i wait 10 hours till the morning. And also driving me crazy if i open 30 apps then i see all of them in the recents after sleep.

 

[uremine12]

Yes, imagine that like a tablet, where you have any app running and then you lock it, then you unlock it. They're still gonna be running (most of them).

Yeah but its the difference between headunits and phones/tablets, the headunit should close apps on sleep, but the thing is i don't remember how it was before, i just see that the apps are in the list, its annoying, but maybe it clears them from memory, cause it shows i have more free ram, and if i click on the trash icon, then it says: 'Nothing to clear in cache'... but they still remain there, i guess its a bug (or it was like this before, but i think the radio shouldn't be playing 10 hours after sleep when i wake it up, if i set it to go to the main interface), i will test it more.

 

[sharkobites]

Hi
I have the TEYES CC3 and 2017 Hyundai Tucson 2.0l AWS when setting up CANBUS which tucson do i select 3 options?

 

[Panamanian]

Yeah but its the difference between headunits and phones/tablets, the headunit should close apps on sleep, but the thing is i don't remember how it was before, i just see that the apps are in the list, its annoying, but maybe it clears them from memory, cause it shows i have more free ram, and if i click on the trash icon, then it says: 'Nothing to clear in cache'... but they still remain there, i guess its a bug (or it was like this before, but i think the radio shouldn't be playing 10 hours after sleep when i wake it up, if i set it to go to the main interface), i will test it more.

Try to take a video if you can, because we are kinda confused.

 

[marius.b]

Hi! I bought a CC3 2K for a 2016 FL Touareg. In car settings I should select CAN BUS Hiworld, but in the package I received a CAN BUS Raise (which works partially). Does anyone know where I could purchase a HIWORLD CAN BUS for the 2016 VW Touareg?

 

[Panamanian]

Hi! I bought a CC3 2K for a 2016 FL Touareg. In car settings I should select CAN BUS Hiworld, but in the package I received a CAN BUS Raise (which works partially). Does anyone know where I could purchase a HIWORLD CAN BUS for the 2016 VW Touareg?

I think you can get it in Aliexpress