Hardware Development TEYES CC3

Search This thread

Panamanian

Senior Member
Nov 24, 2022
63
5
I searched a lot in Aliexpress, but I didn't find a Hiworld for VW Touareg 2016. I tested a CAN BUS Hiworld for VW PQ/MQB all variants on my car, but it doesn't work
All i found were UPTO 2010.
I had a problem with my forester 2017, i had the canbus but didnt know about this warning... take a close look at the last line and try it, hopefully it could help you out.

steering-jpg.5848477
 

aud_61

Member
Aug 7, 2019
34
9
Hi all. Please advise on two questions.
1. Google maps break on the main screen (youtube link) you have to collapse and expand...
2. Waze, if installed on the main screen and in the navigator, then there are troubles (youtube link) that is not clicked on the selected address and does not build a route.

Tablet cc3, the latest firmware was already from the box.

P.S It feels like when we put google maps or waze on the main screen and in the navigator, when we open them, it stretches these applications...

I searched on the Internet and there is nothing on the forum, there was one single question for Waze, it was decided by updating the firmware, there is nothing for Google maps.
I did have the same 1. problem(Google maps) as yours. Having tried to do factory resets, the problem still persistent, hope will be solved soon!!, cuz it is very annoying and waisted more time to get start the Google map normally.
 
Last edited:

Clandaries

Senior Member
May 9, 2013
1,218
304
Stapel
Xiaomi Mi 11 Ultra
Has anyone mannaged to change the bootanimation on the CC3?

Tried with one that was for the Hizpo S8. When i put the bootanimation.zip and lsec6315update on an USB stick it says bottanimation is installed but after the start the Teyes bootanimation is still there.

When i search via Rootexplorer i find a bootanimation.zip but this is the Google animation. There also is a bootanimation.so and a bootanimation.

I would love to have my Suzuki bootanimation back.

Thank you for any help :)
 

Panamanian

Senior Member
Nov 24, 2022
63
5
Guys, is there a way to set a password to avoid the use of the TEYES headunit?
I'll soon send it to service and I don't want them to use it, maybe ONLY the rear backup cam.

Is there something? or an app or anything for that?
 

Panamanian

Senior Member
Nov 24, 2022
63
5
Guys, i have noticed recently that after aprox. 30 minutes of driving in the night the reverse camera flickers a little bit (NOT TOO MUCH) but still noticeable. Wether I'm reversing or have the camera ON (CAM REC).
If i turn the engine off, it still does it.

Anyone else?
 

Sull2

Senior Member
Aug 27, 2013
106
25
I upgraded to firmware 15.03.2023 from the latest Vincent Vega Edition and prior to that I was on 20.10.2022

Initial impressions:

There doesn't seem to be many new features over Vincent Vega Edition. Delayed shutdown being one of them which I enjoy. Battery voltage in status bar is a neat feature, though even teyes says don't rely on it for what that's worth. External temp via canbus, my vehicle displays this on the dash and teyes can't retrieve information from canbus for my vehicle, as I've mentioned in an earlier post I disable the weather in statusbar as it's very buggy, does not display in C and sometimes does not display at all. Teyes Vision app appears to load quicker, on Vincent if loading from the launch shortcuts the device locks up for a sec, that appears not to happen with the latest firmware, also don't think it happened on 20.10.2022, this isn't a huge deal for me as I don't use the app. Some apps now have a startup screen which personally looks kinda ugly and often gives you the sense the app is starting quicker I doubt it is. Will be using more in the coming days these are my very early impressions.

BUGS:

The FM radio turns on automatically on startup randomly even when I wasn't listening to it when the vehicle was turned off last. I saw one report on 4pda regarding this, anyone here have this happening to them ?

Fart through the speakers when turning the vehicle off, I've not heard this yet on the new firmware, on firmware 20.10.2022 I did not experience this right away, after tweaking everything to my liking and working with a specific HVAC issue with teyes, this included updating Canbus.apk, MS.apk etc I did start getting the loud click / fart whatever you want to call it through the speakers, also had it on Vincent Vega Edition, I'll be monitoring it on this firmware NOT CONFIRMED YET.

Sleep, device appeared to be sleeping fine and not fully rebooting, will confirm this later. I never experienced this. Worth noting.
 

Clandaries

Senior Member
May 9, 2013
1,218
304
Stapel
Xiaomi Mi 11 Ultra
I installed the CC3 today. I am very happy. Until now everything is working.

The CC3 id rooted with Magisc. So i can work with Rootexplorer.

The Microphone volume is very low. I have read that there is a fix. But i have no account there to download that fix.

Is it possible to write those 3 lines into a config file in system/etc or whereever?

Thank you
 

Panamanian

Senior Member
Nov 24, 2022
63
5
I upgraded to firmware 15.03.2023 from the latest Vincent Vega Edition and prior to that I was on 20.10.2022

Initial impressions:

There doesn't seem to be many new features over Vincent Vega Edition. Delayed shutdown being one of them which I enjoy. Battery voltage in status bar is a neat feature, though even teyes says don't rely on it for what that's worth. External temp via canbus, my vehicle displays this on the dash and teyes can't retrieve information from canbus for my vehicle, as I've mentioned in an earlier post I disable the weather in statusbar as it's very buggy, does not display in C and sometimes does not display at all. Teyes Vision app appears to load quicker, on Vincent if loading from the launch shortcuts the device locks up for a sec, that appears not to happen with the latest firmware, also don't think it happened on 20.10.2022, this isn't a huge deal for me as I don't use the app. Some apps now have a startup screen which personally looks kinda ugly and often gives you the sense the app is starting quicker I doubt it is. Will be using more in the coming days these are my very early impressions.

BUGS:

The FM radio turns on automatically on startup randomly even when I wasn't listening to it when the vehicle was turned off last. I saw one report on 4pda regarding this, anyone here have this happening to them ?

Fart through the speakers when turning the vehicle off, I've not heard this yet on the new firmware, on firmware 20.10.2022 I did not experience this right away, after tweaking everything to my liking and working with a specific HVAC issue with teyes, this included updating Canbus.apk, MS.apk etc I did start getting the loud click / fart whatever you want to call it through the speakers, also had it on Vincent Vega Edition, I'll be monitoring it on this firmware NOT CONFIRMED YET.

Sleep, device appeared to be sleeping fine and not fully rebooting, will confirm this later. I never experienced this. Worth noting.

How did you remove the external temperature? I want to do that too, but dont know how to.
When i turn my car off it randomly goes to shutdown and sometimes to sleep.

Is it normal?
 

Sull2

Senior Member
Aug 27, 2013
106
25
I installed the CC3 today. I am very happy. Until now everything is working.

The CC3 id rooted with Magisc. So i can work with Rootexplorer.

The Microphone volume is very low. I have read that there is a fix. But i have no account there to download that fix.

Is it possible to write those 3 lines into a config file in system/etc or whereever?

Thank you

You can find a tutorial using their app to register and download the patch, I'm sure you could edit the file though with how finicky this device is I'd use the patch as it's known to be reliable.

How did you remove the external temperature? I want to do that too, but dont know how to.
When i turn my car off it randomly goes to shutdown and sometimes to sleep.

Is it normal?

I spoke about how to remove the weather from statusbar in post #2982 and it appears to work perfectly.

I started my car after work and CC3 booted, since I've had it I don't think I've seen a reboot yet so that's not good it takes a long time if it this keeps happening I'll revert back to Vincent Vega firmware. Will see what happens tomorrow morning.
 
  • Like
Reactions: Panamanian

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    I'm very much considering pulling the trigger on the CC3 2K model for my 2016 Hyundai Genesis Coupe. I'm glad I stumbled across this thread as it has been a web hunt finding good info to make me feel confident that it will work and not become an expensive trial-and-error experiment. Can someone post a pic of what the CC3's climate control popup actually looks like? I've seen a lot of mention of it, but can't seem to find an image of it. There is no other climate control readout in my car, so I want to make sure the CC3 interface is up to par. Thanks.

    When you make any HVAC adjustment via physical buttons something like the attached images will popup for a few seconds. The popup in your vehicle may look different as it's based on your CAN settings.

    In some cases where the Teyes unit is replacing physical hardware buttons then you'll have a full screen app to control HVAC via an onscreen toggle that can be placed somewhere on the screen. I don't have a screenshot of this.
    1
    I have installed another ringtone.

    There is a mic-fix to make the Microphone louder
    1
    Similar to my experience so went to Gordgelin paid firmware.
    All ok so far.
    1
    @gordgelin
    Quick question...

    Do you accept payment through any western payment service? I'm stuck on your old free vincent vega release because I can't figure out how to make any payments to you for your updated paid releases.

    TIA.
    I used paypal. Private message him using telegram.
    1
    No. You must tape the contacts from the flat cable.

    Somewhere here i a picture that shows howto.
  • 7
    Teyes announced another CC3 update for April 2021, here is the translated changelog.



    The following important updates are expected to be released for the CC3 software at the end of April.
    The new version will add the following features:

    1.Added Cam REC software. With this application, you can record from a rear view camera. The recording files are saved to a flash card.

    2.Added TEYES YAHU, the world's first 3D music player for the automotive industry (due to technical complexity, work may not be completed in April).

    3.In the device settings, a function has been added to change the screen brightness depending on the time of sunrise and sunset.

    4.The system version has been updated. Fixed the issue of crashing the Google Play app in some areas.

    5.Added setting for the sensitivity level of voice commands. If you feel that certain keywords easily trigger voice commands, you can lower the sensitivity level. In addition to Russian and English, a voice control function has been added for 7 countries.

    6.Added CAR LINK software which supports Android Auto via wired connection and Car Play via wired and wireless connection. Please note that CARPLAY only supports this feature on CC3 devices released in 2021. Android Auto has no limits. For CARPLAY wired connection, you must use the original iPhone USB cable. When using CARPLAY wirelessly, make sure the mobile phone is connected via Bluetooth.

    7.Updated EQ software and added a phase switch. The volume and sound effects of the subwoofer change according to the volume of the head unit.

    8.Added a new layout for the main screen, as well as automatic switching between day and night modes. From the home screen, you can directly speed dial, view driving data, compass and GPS information. The 4 main music players can be switched with one key. Redesigned and increased image size when viewed in picture-in-picture mode.

    9Optimized software for making Bluetooth phone calls. Added a choice of avatars in favorite contacts. Opened data synchronization with the main interface.

    10.Added TEYES RADIO and private internet station. Musical compositions can be downloaded and shared through the site mp3.teyes.ru

    11.Steering Wheel Key Customization Tutorial has been added for multiple languages.

    12.Added automatic OTA update function. In the future, we will provide 2 update methods: manual download update and automatic update.

    13.Added multi-finger touch control function. To find out how to use this feature, please see the personal settings section.

    14.Added the ability to slide the application menu to the right side of the screen. Swiping from below returns to the previous level. The function is supported no matter which interface you are in!
    6
    Hi. earlier you said taht you dont't recommend buying Teyes for people outside Russia and now, that Teyes focuses on European region. What about other countries from Europe other than Russia? I'm from Poland and I own Ford Focus mk 3 (2011-1015)
    I am in France, and my CC3 gives me complete satisfaction on my Ford Focus 2. I do not see what the restrictions would be due to the development by the Russians
    5
    TEYES has released a new flagship, the CC3 with the following specifications.
    UIS7862 (Unisoc ums512) SOC
    8 core 12 nm big.LITTLE with 2 A75 and 6 A55 cores.
    Up to 6 GB memory and 128 GB of storage.
    9 and 10.1 inch 1280 x 720 QLED +2.5D screen.
    Phillips NXP TEF6686 FM radio.
    ST TDA 7851L amplifier.
    3 x USB 2.0 ports.
    Android 10.
    2 DSP ADAU1701 + Rohm32107 27 EQ.
    Optical + Coaxial output.
    External mic. in.
    2.4 and 5 GHz wifi.
    Full hd rear view camera.
    Built in 4G modem.
    Gyroscope.
    Navigation receives GPS,GLONASS and BEIDOU satellites.
    A metal back case with a fan for the SOC.
    Very shallow which is perfect for cars with undeep dashboards.
    Multiple oem panels and canbus adapters available for different car brands and models.

    Instructions : https://cc3.teyes.ru/en/index.html

    Video's of Teyes Malaysia for settings CC3 in English : https://www.youtube.com/channel/UC0R6aqLJ7mIoEWfql87jnnw/videos

    Factory password : 168
    Developer acces : 7788

    Teyes is quite popular in Russia and Malaysia .

    Here is a short review of a Russian guy from Sound Life with the unboxing...


    https://de.aliexpress.com/store/1980682?spm=a2g0o.productlist.0.0.34e45016mWXdkH

    https://www.alibaba.com/trade/search?fsb=y&IndexArea=product_en&CatId=&SearchText=Teyes+CC3

    Notice that there is also a CC2 plus and a Spro plus, that have more or less the same specifications.
    The Teyes CC2 plus and Spro plus, does not have the extra ADAU1701 DSP and no gyroscope..
    5
    There is no need to remove anything or damage the board. Unclip the plastic cover from the rear side of the screen, unclip the ribbon cable from the board and put a small piece of Sellotape over the two end pins on the right of the cable as you look at it. This way you can easily remove the tape if you change your mind. You need good eyes or a magnifying glass!

    microphone tracks.jpg
    5
    Upcomming CC3 update screenshots:

    cc3_may2021_1.jpg


    cc3_may2021_2.jpg