• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Hardware Development TEYES CC3

Search This thread

surfer63

Senior Member
May 4, 2010
3,769
1,452
Zwolle
hvdwolf.github.io
The software I believe focuses on European region - all the customizations Teyes create for their FYT units.

I dont think the premium price to be worth the value.
Fully agree.
Thanks mate
The issue navifly has no unit fit my car
What about OWNICE K7?

I don't have a Teyes CC3 and neither a Mekede.
What I've seen over the past year in the firmware releases (which I open up and analyze) is that the expensive FYT units like T'eyes, Idoing, K2 and Ownice K7 get more and more customization and with that more and more bugs (as to what I read on these forums). And then T'eyes throws some extra customization flavour over it with a few of their own apps. And why do you need a gyroscope (a little piece of extra hardware): in my eyes a completely useless distracting waste of screen space.

Whereas the cheaper Mekede/NaviFly units keep the more straightforward FYT firmware. I would personally go for a Mekede/NaviFly.

But that's theorizing along the side line. ;)
 
  • Like
Reactions: marchnz

amin111111111

Member
Oct 14, 2010
7
0
Fully agree.


I don't have a Teyes CC3 and neither a Mekede.
What I've seen over the past year in the firmware releases (which I open up and analyze) is that the expensive FYT units like T'eyes, Idoing, K2 and Ownice K7 get more and more customization and with that more and more bugs (as to what I read on these forums). And then T'eyes throws some extra customization flavour over it with a few of their own apps. And why do you need a gyroscope (a little piece of extra hardware): in my eyes a completely useless distracting waste of screen space.

Whereas the cheaper Mekede/NaviFly units keep the more straightforward FYT firmware. I would personally go for a Mekede/NaviFly.

But that's theorizing along the side line. ;)
Thank you so much for your reply
I am afraid my car dosent fit any of NaviFly/Mekede, i contacted them with my old screen size and i am waiting for feedback
Any other option you think off?
 

rudation

New member
Sep 15, 2021
2
1
The software I believe focuses on European region - all the customizations Teyes create for their FYT units.

I dont think the premium price to be worth the value.
Hi. earlier you said taht you dont't recommend buying Teyes for people outside Russia and now, that Teyes focuses on European region. What about other countries from Europe other than Russia? I'm from Poland and I own Ford Focus mk 3 (2011-1015)
 
  • Like
Reactions: marchnz

JMM44700

Member
Jun 17, 2018
49
16
Orvault
Hi. earlier you said taht you dont't recommend buying Teyes for people outside Russia and now, that Teyes focuses on European region. What about other countries from Europe other than Russia? I'm from Poland and I own Ford Focus mk 3 (2011-1015)
I am in France, and my CC3 gives me complete satisfaction on my Ford Focus 2. I do not see what the restrictions would be due to the development by the Russians
 

Rookie23

Member
Sep 20, 2021
18
0
I have a CC3 in a 2014 Ford Ranger and have a few issue that I have been trying to get some support with via TEyes Australia and the WhatsApp tech support is poor as they don't seem to understand English even with Video, photos etc, its been frustrating. The latest issue I have is that the CC3 in standby seems to be draining my battery as its driven infreqently and I have had 2 time so far where it will not start. My situation is this:
  • Park car in garage at home, turn off engine ignition and remove keys, CC3 is still on and playing music etc
  • When I open the car door, the CC3 screen goes off, assuming it goes to Standby
  • I do not lock the car as its in my locked garage connected to the house, the battery voltage slowly drops and in 5- 7 days I will have an issue if the car is not driven
Any ideas how to resolve this? eg. will locking the car better isolate the battery (I wouldn't have thought so as the accessories are turned of at the ignition)
Is there a way to shutdown the CC3 as i can only see reboot and standby as options?
Hi, i posted this in the TEyes Australia thread, it was suggested that I also post here as its more active.
Also, this was just posted there isn repsonse to the question of whether my previous unit behaved differently.

Thanks will post in other thread. My very old Windows 6.0 unit turned off with the ignition key. Its a new thing that the unit stays on after I have turned the ignition key off and even after I have removed the key.

There is a option on the Settings / Factory menu that says "Automatic Start and Stop" anyone know what that is supposed to do?
 

Palumbum

Member
Jun 28, 2021
8
1
I have a 2020 Jeep Wrangler with blind spot monitors and rear parking sensors. I installed the 3.5mm external speaker, and when reversing, the beeps work when I get close to someone. If someone is in my blind spots and I turn my blinker on, the car is supposed to "beep"/notify my but no noise. In the Car Info app I have it set properly to "Lamp Alarm"
Any others with a Jeep Wrangler fix this issue? Should I try uninstalling the provided 3.5mm external speaker? I have CC3
 

fdbonfim

New member
Sep 20, 2021
1
0
Hello, Im new here first this is an amazing forum.

Teyes Cc3 6/128
with the original firmware the rear camera and dvr xcar worked 100%, odbii conect via bluetooth but the software doesn't recognize.

after update to 24.07.2021 firmware
cc3 doesn't recognize dvr xcar and obdii still don't work.

Anyone had the same problem?
 

WV1

Member
Jun 9, 2021
34
5
Hi, i posted this in the TEyes Australia thread, it was suggested that I also post here as its more active.
Also, this was just posted there isn repsonse to the question of whether my previous unit behaved differently.
It does appear that the cc3 is not being powered correctly. On my car the headlights etc will turn off when the door is opened and I believe this is controlled by the canbus. Have you played around with the canbus settings. My understanding is that cc3 goes into deep sleep after a few days of not being used to conserve battery maybe this is not happening because of the way it is being powered.
 
  • Like
Reactions: marchnz

WV1

Member
Jun 9, 2021
34
5
There seems to be an update on Joying units for Wireless Android Auto with CarLink 2.0 app. Check out the link below.

Will this work on Teyes units?
Gordgelin has a patch for CC3 running Vincent Vega edition firmware. Not sure why you would want to run Android auto as the main unit does all that and more that Android Auto brings to the unit. When I tried the wired version I could not use the terrestrial radio at the same time which is my main listening while driving.
 

Rookie23

Member
Sep 20, 2021
18
0
It does appear that the cc3 is not being powered correctly. On my car the headlights etc will turn off when the door is opened and I believe this is controlled by the canbus. Have you played around with the canbus settings. My understanding is that cc3 goes into deep sleep after a few days of not being used to conserve battery maybe this is not happening because of the way it is being powered.
I am not sure how to play around with the Canbus settings and what to change, feel free to point me in the right direction of how to do this. I have been unable to change or set Console or Steering Wheel controls via the CC3 interface but I may be doing something incorrectly but it doesn't seem to register any buttons I am pressing and I haven't had any success with getting tech assistance.

Any clearer indication of what a few days is as my battery is draining surprising quickly? Every 3 or 4 days I am charging it manually at the moment if it hasn't been driven.
 

WV1

Member
Jun 9, 2021
34
5
I am not sure how to play around with the Canbus settings and what to change, feel free to point me in the right direction of how to do this. I have been unable to change or set Console or Steering Wheel controls via the CC3 interface but I may be doing something incorrectly but it doesn't seem to register any buttons I am pressing and I haven't had any success with getting tech assistance.

Any clearer indication of what a few days is as my battery is draining surprising quickly? Every 3 or 4 days I am charging it manually at the moment if it hasn't been driven.
You should have been supplied a canbus module. https://cc3.teyes.ru/en/canbus.html and this has a setting for your vehicle. This should also set steering wheel controls. Are you in Aus.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Hello everyone, l always get an ignition reboot on CC3 recently. Anytime l start my car the radio take some time to start. It wasn't like that when l first install it, may you tell me what to do for the radio start without reboot when l start the car please?
    Check https://forum.xda-developers.com/t/teyes-cc3.4189041/page-60#post-85674211

    There is a setting to determine whether to reboot or sleep when you turn off the car.

    However, if it was working properly before, it could mean that someone may have changed this setting or, in another forum, it has been suggested that low car battery voltage level could be an issue. If there is no specific reason for a low voltage level, the other forum suggested perhaps the car battery isn't in the best shape. Depending on where you are, some car stores can check/load test the battery. In Canada, Canadian Tire does this. In the United States, I think there are several that do this, such as AutoZone and Advance Auto Parts.
    1
    Did my 4th try and now I understand how the onboard Bluetooth works. Now the Scantool obdlink mx Bluetooth can be detected but only by Torque which I have the paid version for a long time. Then my Zus tpms also can be detected too.

    Guess the in built apps are made for teyes accessories only and will not work with others. Anyway better than not totally not working. Hope the bluetooth pairing can offer more clarity to the user rather than that message indicating it is successfully connected but the connection icon still shows its not paired.

    Hope the next update on the firmware will open up more so the head unit will attract more vehicle owners to get it. Its really a very nice head unit with a brilliant screen and offers great sound too with the right speakers of cos.
    1
    Don't think I have a power button on top left of screen or I may be missing something obvious.
    The "!" mark doesn't seem to do anything, anyone know what this is supposed to do?
    What the... It looks that those buttons are under the panel, Those 2 holes are for the mic and the reset of the device. Something is clearly wrong with that oem panel.
    1
    It looks like the Ford Ranger bezel is not wide enough for the CC3 so they have done a hack job https://www.aliexpress.com/item/100....store_pc_groupList.8148356.22.79d45441N03VSk
    Pity you did not pick this up before ordering or told about it as it means you have no home, power or back buttons which are all used to control the unit. I am always using the home button as I cannot get the unit to startup at the home screen. Not sure what you do to get to the home screen.
    Edit: Just installed a patch by Gordgelin that starts Teyes at home screen I will see how it goes.
    1
    It actually looks like the bezel covers the edges of the screen. The normal touch panel buttons are usually immediately below the two microphone/reset holes.

    You can try installing a software home button from the Google Play Store but I'm not sure how that will work. Here's one I found:


    Either they messed up the bezel or there wasn't enough room or something...

    I have one of my steering wheel buttons mapped to Home and another mapped to back/return.

    I think the icon with the exclamation mark means that there is no SIM in the unit. With my SPro/CC2 head unit, which is Android 8.1, the icon shows up in the status bar at the top of the screen. I used the System UI Tuner, which is hidden but available on the SPro/CC2. I'm not sure about the CC3. As well, I'm not sure what that strip on the left-hand side of the screen is...is it part of the launcher or a system component? For this, there are a bunch of apps in the Google Playstore which either unhide or allow access to these System UI Tuner features or functions. You can try looking for them:


    Don't know anything about these apps. You should research or try them yourself. Post your experiences for others. Hopefully, one of these work. It was very annoying for me. I access data for the head unit through a hotspot on my cell phone.

    FYI, the System UI Tuner allows you to show/hide various items. On mine it looks something like this. I don't think all of these options were available and I think I turned off "Mobile data". This is something you modify once and then forget about it. It will likely be different for the CC3 if it can be accessed at all:

    1632704938054.png
  • 7
    Teyes announced another CC3 update for April 2021, here is the translated changelog.



    The following important updates are expected to be released for the CC3 software at the end of April.
    The new version will add the following features:

    1.Added Cam REC software. With this application, you can record from a rear view camera. The recording files are saved to a flash card.

    2.Added TEYES YAHU, the world's first 3D music player for the automotive industry (due to technical complexity, work may not be completed in April).

    3.In the device settings, a function has been added to change the screen brightness depending on the time of sunrise and sunset.

    4.The system version has been updated. Fixed the issue of crashing the Google Play app in some areas.

    5.Added setting for the sensitivity level of voice commands. If you feel that certain keywords easily trigger voice commands, you can lower the sensitivity level. In addition to Russian and English, a voice control function has been added for 7 countries.

    6.Added CAR LINK software which supports Android Auto via wired connection and Car Play via wired and wireless connection. Please note that CARPLAY only supports this feature on CC3 devices released in 2021. Android Auto has no limits. For CARPLAY wired connection, you must use the original iPhone USB cable. When using CARPLAY wirelessly, make sure the mobile phone is connected via Bluetooth.

    7.Updated EQ software and added a phase switch. The volume and sound effects of the subwoofer change according to the volume of the head unit.

    8.Added a new layout for the main screen, as well as automatic switching between day and night modes. From the home screen, you can directly speed dial, view driving data, compass and GPS information. The 4 main music players can be switched with one key. Redesigned and increased image size when viewed in picture-in-picture mode.

    9Optimized software for making Bluetooth phone calls. Added a choice of avatars in favorite contacts. Opened data synchronization with the main interface.

    10.Added TEYES RADIO and private internet station. Musical compositions can be downloaded and shared through the site mp3.teyes.ru

    11.Steering Wheel Key Customization Tutorial has been added for multiple languages.

    12.Added automatic OTA update function. In the future, we will provide 2 update methods: manual download update and automatic update.

    13.Added multi-finger touch control function. To find out how to use this feature, please see the personal settings section.

    14.Added the ability to slide the application menu to the right side of the screen. Swiping from below returns to the previous level. The function is supported no matter which interface you are in!
    5
    Hi. earlier you said taht you dont't recommend buying Teyes for people outside Russia and now, that Teyes focuses on European region. What about other countries from Europe other than Russia? I'm from Poland and I own Ford Focus mk 3 (2011-1015)
    I am in France, and my CC3 gives me complete satisfaction on my Ford Focus 2. I do not see what the restrictions would be due to the development by the Russians
    5
    Upcomming CC3 update screenshots:

    cc3_may2021_1.jpg


    cc3_may2021_2.jpg
    4
    I want wipe dalvik cache.but I dont know how
    unpack this to usb stick and plug into HU usb port, just like usual firmware update. it will clear cache
    4
    Could be a holiday thing maybe?
    LOL, this is 9th of MAY, WWII Victory Day in CIS and some other countries
    s1200.jpeg