The easiest way to get root and recovery on T2 ultra dual {5.1.1} {.182}

rituraj_singh

Member
Feb 26, 2015
39
30
48
Patna
My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}

Now the way to root our t2 ultra dual {5.1.1} {.182}:

Download the ftf file of latest firmware 19.4.A.0.182 (search on google)



Download latest version or V 0.8 of prf creator (search on google and get xda link)



Download SuperSU.zip (search on google)



Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.

Add ftf file and superSU.zip in prf creator

Mark all the boxes on right side of prf creator window

Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder

Copy this flashable zip and put it in root of SD card of your phone.



Now reboot your phone in recovery



after rebooting into recovery, follow in sequence:


Wipe

Advanced wipe

select:


cache

dalvik

system

data

internal memory

swipe to wipe

go back to recovery home

tap install

select external sd card

select that flashable zip

swipe to flash

wipe dalvik

reboot to system.



To install recovery:



Download latest nut's xzdr installer zip

Put it somewhere in your computer

Extract it, you will get a folder of same name

Connect your phone to pc in USB debugging mode

Open the extracted folder

Double click the windows installer batch file

Grant superuser access on your phone's screen

Follow the instructions on terminal

(press 1 on your pc as you have SuperSU in your phone)

After successful instalation of recovery, your phone will reboot into recovery.

Reboot the phone into system

.

.

Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
 
Last edited:

r2rdcroix

Member
Aug 16, 2014
35
10
0
This is not even close to simple dude..

This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA
 
  • Like
Reactions: rrd84

rrd84

Senior Member
Jul 18, 2014
351
54
28
there are few additions required for noob like me


To make work this method

Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.


To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources
 

rituraj_singh

Member
Feb 26, 2015
39
30
48
Patna
This is not even close to simple dude..



This is what i did to root :

1. Copy SuperSU to sdcard

2. Flash DUAL_RECOVERY_D5322-LP.img

3. Install supersu then power off

4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL

5. REBOOT & VIOLA

When you tick all the boxes in prf creator, kernel gets added.

Sent from my D5322 using XDA Forums Pro.
 

rituraj_singh

Member
Feb 26, 2015
39
30
48
Patna
there are few additions required for noob like me


To make work this method

Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.


To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources

Yeah I already said it's a sequel to my first post. In which you would see how to root D5322 on 5.0.2, and ofcourse recovery is needed. Thanks.

Sent from my D5322 using XDA Forums Pro.
 

theokon

Member
Oct 18, 2015
5
4
0
Thanks. For my XPERIA T2 ULTRA DUAL I had to made a change:
Instead of using the Recovery-Software you (rituraj_singh) offered I had to use the software (TWRP) recommended b abcdjdj in his post from 27th May 2014 ((D5322) Dual Recovery) on the XDA-Forum.
For the not-experienced Users of Androxyde Xperia Flash Tool: You can use the XperiFirm-Software (XI-Button in the Flash-Tool) and install the 5.0.1 (19.3.A.0.472)-Firmware from MELA Latin, but you have to overwrite also the Userdata and the Apps-Log, otherwise there are problems. After flashing use KingRoot to root your device, than replace kinguser using the batch-script of w0lfdroid.com (May 2015) placing the mrw-folder (included in the downloaded zip) on the intern memory (important) and executing it with Terminal Emulator. Than open SuperSu (installed by the script, not by you), and actualize the root-script. Afterwards reboot.
A Tip: After having installed the TWRP-Software on your phone you could have problems rebooting into the system, so prepare all and after having flashed the custom prf-rom on the device all would be function!
 

theokon

Member
Oct 18, 2015
5
4
0
A step-by-step-Version (summary)

Hello

I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions, :(

maybe email me [email protected]

:good:
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).

The copyright is by the "Post"-authors like rituraj_singh and abcdjdj (I took the links to the posts nearby the description of the step) and by w0lfdroid.com, xperiafirmware.com and the software-producers.
I only wanted to create a step-by-step-summary. There is no garantuee which garantuees success using the summery! No responsability dad it does not destroy your mobilephone. Use it at your own risk! Thank you to the original "owners" of the posts. I hope the summary is ok for them! Otherwise contact me.

Time: maybe 1 hour or 2 hours

Tipp: if you until yet did not install Android 5.1.1 on your Xperia T2 Ultra Dual you do not have to follow the steps which are describing how to download the older Firmware via XperiFirm, but you should have installed the FlashTool just for the drivers (You won't use it directly). You can use the steps describing how to root the older Firmware using KingRoot, than continue with step 7.

1) Install the Androxyde FlashTool on your Computer: http://www.flashtool.net/downloads.php or found on the XDA-Forum, install the ADB-Packages (ADB, ADB-Drivers) on your Computer and make the ADB-Command part of the "path"-Variable of your Computers Terminal (see Google)
2) Install XperiFirm (cause easy for beginners): open the FlashTool and click on the "XF-button" near the "plus-in-a-square"-button and the "flash"-button.
3) After having installed the XperiFirm-Tool open it and click on "Xperia T2 Ultra (tianchi)" and select "D5322/XM50H (dual)"
4) Than click on the "Check-All"-Button over the Line "Latest Release"
5) Click on "MENA Latin" in the "Market"-Line and than on the "19.3.A.0.472 / R3C" and download it (having activated "unpack automatically")
6) Go to "xperiafirmware.com/8-firmware/58-sony-xperia-t2-ultra-dual-d5322" and download it (see chapter "1." on the website ), but do not flash it
7) Download the newest PRF-Creator (ZIP) from the following XDA-Forum-Link and unzip it: http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
8) Download the newest SuperSU-ZIP from chainfire (https://download.chainfire.eu/696/SuperSU). and paste the ZIP in the unzipped PRF-Creator-folder: https://download.chainfire.eu/696/SuperSU
9) Now copy the .ftf-file (Firmware) downloaded from xperiafirmware.com also in the unzipped PRF-Creator-folder and open the PRF-Creator.exe
10) The PRF-Creator asks for the .TFT-File (select the one you downloaded from xperiafirmware.com) and for the SuperSU-ZIP-File (select the one downloaded from chainfire)
11) Select in the "Include"-field: "Kernel"; "FOTA-Kernel"; "Modem" and "LTALable", also "Sign ZIP" and "Legacy Mode"
12) Click create and wait until finished
13) Copy the created "flashable-prerooted.zip" from your unzipped PRF-Creator-Folder to the external SD-Card of your Device
14) BackUp your mobilephone using the "Sony PC Companion" or simular software like Wondershare's "MobileGo"
14a) Control if you have unlocked your Boatloader (normally it's locked) and if it's locked, go to the "Sony Mobile Developers Unlock Bootloader Website" and follow the instructions there Important: You could have to install ADB and Sony's ADB-Drivers (find ADB using google) and the Sony FlashTool "Emma" will not work with the Xperia T2 Ultra Dual
15) Shut down your phone and start it holding the "Volume-down"-Button while plugging in the USB-Cable (it won't show more than a black screen)
16) Close "XperiFirm", wait until it finished and then click on the "Flash"-Button and select in the new window "Flashmode" and "OK" (obviously)
17) Select the Firmware you downloaded before with XperiFirm (19.3.A.0.472) and select in the "Wipe"-Field: "APPS_LOG" and "USERDATA" (!!!important!!! otherwise problems)
18) Click on the "Flash"-Button and wait until it's done (sometimes the flashtool has problems with the files - dont worry: shutdown the FlashTool and retry it once more)
19) Unplug the mobilephone from the USB-Cable, start it and follow the instructions
20) After having prepared the mobilephone go to "kingroot.net/wap/download" and download KingRoot (sometime trouble with the site, try it once more)
21) Afterwards enable the DeveloperMode (settings - About Phone - click "build number" 7 times) and enable the "unknown sources" (settings - Security - unknown sources)
22) Install KingRoot and root your Xperia T2 Ultra Dual
23) Install "Terminal Emulator" from the Google Play-Appstore to your device and open it
24) Go to "http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html" and download the newest "Replace KingUser with SuperSU.zip" and unpack it to your device's intern memory (!!!important!!! otherwise no function)
25) In the Terminal Emulator App enter "su" for gaining "root"-access ("Enter" obviously), than enter "sh /sdcard/mrw/root.sh" and wait until it finish (it will open SuperSU)
26) Actualize the file as requested by SuperSU and, after having had success, reboot your mobilephone
27) Install a Root-Checker-App from Google Play Store and control, if you see a window from "SuperSU", otherwise repeat the last steps
28) Go to "https://goo.gl/lg6I2t" or visit directly the XDA-Forum-Post of abcdjdj (http://forum.xda-developers.com/showthread.php?t=2764408) and download his "TWRP-KK-T2_DUAL-V3.img" or newer
29) Shut down your mobilephone. Afterwards hold the "Volume-Up"-Button while plugging in the USB-Cable (it shows only a black screen) and connect it to the Computer
30) Check if you have installed all fastboot drivers for your device, then open the "Command Line" of your Computer "as Administrator" and enter: "fastboot flash boot (path-to-the-file-downloaded-in-the-last-step)/TWRP-KK-T2_DUAL-V3.img" and click obviously "Enter"
31) Now unplug your mobilephone, than hold the "Volume-down"-Button and the "Power"-Button at the same time: TWRP-Recovery will start
32) Select "Wipe", than "Advanced Wipe", than select "intern. memory", "dalvik", "cache", "data" and "system"
33) Swipe to Wipe
34) Go to TWRP's home (twice times the "back"-Button) and select "Install", than "external SD-Card" and select "flashable-prerooted.zip" and confirm the warning, than SWIPE to INSTALL (flashing)
35) Wipe the Dalvik-Cache
36) Reboot into System and follow your mobilephone's instructions
37) Install a Root Checker App from Google Play Store and control if it's rooted, afterwards install the backup of your mobilephone made at the beginning
38) Install "Titanium Backup" and disinstall (after having done a backup of the app you want to delete) Apps you do not want
39) Install "Link-to-SD" from GooglePlay, prepare your external SD-Card with a partition manager (using your Computer) and copy all possible apps completly to the SD-Card
 
Last edited:

Foch155

Member
Nov 11, 2014
7
10
0
This works on T2 ULTRA D5306 Single SIM

Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
Well my friend, first at all, this is a awsome guide, it really help me to load the 5.1.1 on my SP. I Must said that even if this looks
overwhelming at the begining, it's pretty easy to do it.

Just for the FeedBack, this method works in:

T2 Ultra D5306 Single SIM, TELCEL.
I use the US CUSTOM Stock ROM 5.1.1 ( 19.4.A.0.182 ), if ask for the FTF, look at the FTF MEGAPOST.

Thanks to @rituraj_singh for find this method and @theokon to make the Easy-Mode Guide.

This thread must being Sticky.

PS: You have to add one step: When you reboot after the Flash, it can take a while in start the smartphone, It is to prevent panic if they see it takes a lot time to start, they might think it is bricked and try to restart it. :good:
 
Last edited:

Foch155

Member
Nov 11, 2014
7
10
0
This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.
You got the error when you try to mount on /dev/block/mmcblk1p2 ? it and said that the mount fail?

I had that error as well, maybe you have to try this @virgilone2:

1.- Uninstall the Link2SD.
2.- Install the SD MAID and run it, clean it up.
3.- Reinstall the Link2SD.
4.- Install the Recovery (I use this) [ XZDualRecovery 2.8.21 ] or the same you use in the guide.
5.- Run the Recovery, and go to Wipe > Advance Wipe > Davik Cache, Swipe to Wipe, after it ends go to Reboot > System.
6.- Before your smartphone start as usual, going to pop one little window with a counter, wait to end (Maybe take a while).
7.-Run you Link2SD, it have to Mount the ext2 partition and ask for reboot, if isnt the case, just recreate the mount script.
8.- Enjoy your Link2SD in Lollipop 5.1.1 :good:

This works for me, i hope works for you as well ;)
 
Last edited:
  • Like
Reactions: inaldocc

theokon

Member
Oct 18, 2015
5
4
0
Windows 10 Driver Problems

When having updated to Windows 10 driver problems could happen.
When entering "fastboot devices" in your computer's terminal and nothinh happens it is like this.
You can solve this easily:
1) Plug in your phone in fastboot mode into the computer (Volume Up + Plug-In of the USB-cable)
2) Go to the"Devices manager" (or called simular, as I don't know how to translate it correctly), where you will find the unknown S1 fastboot driver.
3) Download the official Sony flashing tool "EMMA" and reinstall the "Android Studio" in order to get the correct drivers
4) For security download also the "Universal ADB Drivers Package" from chip.de and install it
5) Back in the Device Manager reinstall the correct driver selecting it from the drivers list (!): Sony SA0110 - ADB Interface driver
 

manojkumar8552

Senior Member
Nov 9, 2013
664
497
0
AHEMADABAD
My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}

Now the way to root our t2 ultra dual {5.1.1} {.182}:

Download the ftf file of latest firmware 19.4.A.0.182 (search on google)



Download latest version or V 0.8 of prf creator (search on google and get xda link)



Download SuperSU.zip (search on google)



Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.

Add ftf file and superSU.zip in prf creator

Mark all the boxes on right side of prf creator window

Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder

Copy this flashable zip and put it in root of SD card of your phone.



Now reboot your phone in recovery



after rebooting into recovery, follow in sequence:


Wipe

Advanced wipe

select:


cache

dalvik

system

data

internal memory

swipe to wipe

go back to recovery home

tap install

select external sd card

select that flashable zip

swipe to flash

wipe dalvik

reboot to system.



To install recovery:



Download latest nut's xzdr installer zip

Put it somewhere in your computer

Extract it, you will get a folder of same name

Connect your phone to pc in USB debugging mode

Open the extracted folder

Double click the windows installer batch file

Grant superuser access on your phone's screen

Follow the instructions on terminal

(press 1 on your pc as you have SuperSU in your phone)

After successful instalation of recovery, your phone will reboot into recovery.

Reboot the phone into system

.

.

Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
worat guide i ever seen in xda !!
no links !!
 

rituraj_singh

Member
Feb 26, 2015
39
30
48
Patna
worat guide i ever seen in xda !!

no links !!

Well thanks!! Links needed to perform the steps suggested are everywhere in the realm of Internet. Uploading same thing again and again is waste of space,data and everything. Hope you understand.
Ftf can be downloaded through xperi-firm and recovery can be downloaded from nut's Xperia files website. SuperSU is already available in more than 1000 places on Internet. And prf creator is created by a certain developer which is already available on xda. So reposting his item might be considered as kinda theft/plagiarism. And this is already mentioned in this post that it's a sequel of previous post. So please do your own bit of work/home work before posting negative comments.

Sent from my D5322 using XDA Forums Pro.
 

manojkumar8552

Senior Member
Nov 9, 2013
664
497
0
AHEMADABAD
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.

Sent from my Moto G 2014 using Tapatalk
 

rituraj_singh

Member
Feb 26, 2015
39
30
48
Patna
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.

Sent from my Moto G 2014 using Tapatalk

This post is a sequel of previous post. To perform the steps mentioned you need to be on earlier versions of Android. Like 5.0.2 or earlier. And recovery must be installed in that. If you're on 5.0.2 follow my post about how to root on 5.0.2.

Sent from my D5322 using XDA Forums Pro.
 

rituraj_singh

Member
Feb 26, 2015
39
30
48
Patna
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.

Sent from my Moto G 2014 using Tapatalk

Well.. You can use KingRoot v 4.5.2*to root 5.1.1 and for SuperSU follow my previous post.

Sent from my D5322 using XDA Forums Pro.