• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[THOR/RECOVERY LOCKED] Safestrap Recovery v3.72/v3.75 [B02 2014-07-03]

Search This thread

Koetermann

Senior Member
Mar 28, 2011
125
27
Bremen
Hi,

in Rom Slot 1 I can't restore any backup that is made by safestrap. Whenever I try to restore I got a red message "failed".
Read here that a few months ago some users had similar issues, but without a solution.

Any ideas?

Ok, had a little time to test this morning. Obviously it's not possible to restore a backup in the same ROM Slot. Did a backup from ROM slot 1, and restored this in a new created ROM slot 2 worked without any issues. But directly backup and restore in ROM slot 1 doesn't work.
 

zswielder

Senior Member
Feb 25, 2011
603
62
Can someone please explain why some of us are running into blank screen issue with safestrap? Do we have any speculations about possible causes?
 

Cpasjuste

Senior Member
Jun 8, 2007
962
1,358
For black screen issues, your problem is probably that you are with an incompatible kernel/safestrap combo. Easier way to be sure is tu update to 3.2.4 then install latest ss. It will work this way.
 

jimyv

Senior Member
Jan 31, 2012
583
188
central Indiana
try

Can someone please explain why some of us are running into blank screen issue with safestrap? Do we have any speculations about possible causes?
reading the complete operating procedure ,OP.and at least skimming this thread would have answered that for you

research and went through the procedure myself on my 7 inch if you use this way to drop from 2.4 down to. 1 you will still need to use the safestrap 2.4.for some reason version 3. 75
 

Attachments

  • Screenshots_2015-01-02-23-15-18.jpg
    Screenshots_2015-01-02-23-15-18.jpg
    105.4 KB · Views: 337
Last edited:

zswielder

Senior Member
Feb 25, 2011
603
62
reading the complete operating procedure ,OP.and at least skimming this thread would have answered that for you.

Is that attached picture with an arrow supposed to be your answer to my question? If so, I'm afraid it isn't. I did read that and I did use the right version for my OS version.
 

jimyv

Senior Member
Jan 31, 2012
583
188
central Indiana
well

I did read through the thread before posting my question, and I did come across a couple of people reporting the same issue, but there was no follow-up on either of them nor was there any solution/explanation offered.
I just went through all of it myself on one of my 7 inch HDX and none of the safe straps work for the older firmware I have no idea why but the only one that will work even after the rollback. is 3.75 is for the. 2.4 firmware but it's the only one that would work even after I rolled back
 
Last edited by a moderator:

shadowcliffs

Senior Member
Jan 29, 2014
1,039
256
It's recommended that you do so though it's not required. There is no reason to have safestrap if you have TWRP installed.

Safestrap is a version of TWRP.

But it seems satestrap does not show up anymore during boot after twrp 2.8 installed, how am I supposed to uninstall it?

Sent from my KFTHWA using XDA Premium 4 mobile app
 

andPS2

Senior Member
Jan 15, 2011
315
50
as @jimyv said in another thread its worth to check with
Root Browser \mnt\shell\emulated\safestrap
to see if there are still old rom slots there
deleting them can free up lots of space!
 
Last edited:
  • Like
Reactions: Cpasjuste

manymarius73

Senior Member
Aug 23, 2012
115
15
Glenn heights
Sorry, wrong post

Is there a reason the time and date won't stay correct, no matter what setting I use? Does anyone have problems with the settings not showing up every so often, until I restart it.
 
Last edited:
Aug 9, 2010
35
8
Download

Anyone have a copy of the download for "Safestrap-Thor-3.75-os3.2.4-B02.apk"? It appears that both download mirrors are down.
Apparently I picked a bad time to finally decide to throw safestrap on my HDX.

Thank you in advance.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 64
    ATTENTION: I will be stopping official Safestrap support on 9/1/2014. For more information please see:
    https://plus.google.com/111109372727398356624/posts/AtoJ3xLj35b


    *** DISCLAIMER ***
    I work on projects that may brick your device. Don't sue me, hate me or try and kill my dog if that happens. I will feel bad the community will feel bad and hopefully we'll find a way to get you going again. But, the very nature of my projects involves a certain amount of risk taken by YOU. And by using the projects that I work on, you've accepted that fact.


    PLEASE PLEASE BE VERY CAREFUL WITH SAFESTRAP!!
    MAKE A BACKUP OF STOCK RIGHT AFTER YOU GET SAFESTRAP INSTALLED SO THAT YOU HAVE SOME KIND OF DISASTER RECOVERY.
    THEN YOU CAN RESTORE IT TO A ROM-SLOT (AFTER YOU MAKE ONE).
    ONLY MODIFY ROM-SLOT FILES. LEAVE YOUR STOCK ROM ALONE!!



    WARNING: THERE IS AN UNKNOWN ISSUE WHERE IF YOU HAVE ENCRYPTION ENABLED AND INSTALL SS IT BOOTLOOPS. IF YOU FIT THIS DESCRIPTION PLEASE STAY AWAY FROM SAFESTRAP FOR NOW.


    UNKNOWN ISSUE: If you try and start Wifi and the device crashes/reboots, try turning on bluetooth prior to enabling wifi and see if that works.



    CURRENT PROJECT STATUS:
    BETA-STABLE


    WHAT IS SAFESTRAP?

    Safestrap is a Bootstrap / Recovery for locked bootloader phones. The goal is to avoid touching your primary system (I'll call this "stock" system) and only flash or make large changes to another place on your phone that Safestrap treats as a "2nd system" (in this case, it's a series of virtual ROM slots located on the internal emmc area: "/sdcard"). Once installed, you will see a "Splashscreen" giving you the option to hit "menu" to enter recovery. The recovery portion of Safestrap is now based on TWRP 2.7.x.x (a touch based recovery) and you can perform .zip installs, backups and restores here. The additional features I've added to TWRP are mostly located under the "Boot Options" menu:
    1. Here you can create virtual ROM-slots for flashing ROMs. These ROM-slots allow for different sizes of /system, /data and /cache partitions. The defaults *SHOULD* be good enough for flashing the stock-based ROMs.

      NOTE: The bigger you make these partition the less room you will have to make other ROM-slots.
    2. You can activate a new ROM-slot by choosing the slot you wish to make active and then selecting the "Activate" button. Once active, you will see the "rom-slot#" up in the top of the screen shown in green. If you make the "stock" ROM active, then you can see it in the top shown in red.
    3. Once a ROM-slot is active, all actions you would normally perform using TWRP are directed to that ROM-slot. For example, "Install" to flash a .zip, backup and restore.
    4. For more information you can read up here:
      http://blog.hash-of-codes.com/how-to-safestrap/

    HOW DO I INSTALL SAFESTRAP?
    1. Requirement: Rooted w/ SuperSU installed
    2. Requirement: Allow APK install from Unknown Sources
    3. Download the Safestrap APK
    4. Find the APK using a Filemanager tool and open it on your device, then click "Install".
    5. (If updating from an existing Safestrap you might be warned that this will over-write the existing installation. Click the "Yes" equivalent to this message.)
    6. Once installed, open up the Safestrap application as you would any other app.
    7. Agree to the disclaimer that you won't try to sue me and hunt me down with a rifle if you manage to break your phone..
    8. Then use the "Install Recovery" button. You should see the current version down in the lower left corner of the window. And the "Status:" should say "Installed" when you're done.
    9. From there you can reboot and you *should* see a new splash screen during the boot up. While this is showing you can enter Safestrap Recovery using the [ menu ] button.
    10. That's it for the installation! Read below for a brief overview of Safestrap Recovery v3.x


    HOW DO I ENTER RECOVERY?

    During each reboot a splashscreen will be displayed showing whether the device is running a rom-slot or on the "Stock ROM".
    Press the button shown on the screen to either enter "RECOVERY" or "CONTINUE" booting.

    HOW DO I UPGRADE SAFESTRAP?
    • Push the APK up to your sdcard.
    • Boot back into the "stock" rom-slot.
    • Go into your old Safestrap app and use the "Uninstall Recovery" button
    • Open an "explorer" of some sort (ESFileExplorer, etc)
    • Browse to where you pushed the APK
    • Click on it and install like normal
    • Once installed, open the APK
    • Grant SU access
    • Use the "Install Recovery" button
    • All set, now you can reboot and re-activate whatever rom-slot you were using

    DOWNLOADS:
    CONFIRM YOUR STOCK OS VERSION BELOW AND THAT YOU ARE USING THE KINDLE FIRE HDX 7" (THOR)
    [13.3.2.1 and earlier] LATEST FILE: Safestrap-Thor-3.72.apk
    [13.3.2.3.2 and later] LATEST FILE: Safestrap-Thor-3.75-os3.2.4-B02.apk
    Mirror 1: Crackflasher Download
    Mirror 2: Goo.im Download

    Here's an amazon-os .zip that can be used on rom-slots for re-flashing the OS -- MUST MATCH STOCK ROM:

    THOR ONLY (HDX 7") 13.3.1.0: Download from goo.im
    md5sum: 24fee10d8c6b0dbf583465baa938e842

    It's the straight Amazon OS:
    • not DeOdexed
    • will not stop OTAs
    • is not rooted
    • the only changes I made, were to strip out the boot.img or modem.img flashing stuff.

    To root, I recommend flashing SuperSU.zip from here and flash in Safestrap to the active rom-slot after flashing the ROM:
    http://download.chainfire.eu/supersu



    As of version 3.x, Safestrap Recovery is now based on TWRP. For more on TWRP you can visit their website: http://www.teamw.in/

    WARNING: Safestrap is heavily modified to be "Safe" for your device. Do not download TWRP from their website and expect it to work the same way. Also TWRP does not support Safestrap, tho some issues that may come up will be TWRP dependant, please try and contact myself or look on the forums for your device for answers before hunting down TWRP people. They won't be able to help w/ Safestrap specific questions.

    For the purposes of direct user testing I've established a channel on freenode.net IRC: #safestrap
    I'm in the channel mostly all the time, but may not be active for discussion.

    Special Thanks To
    DeesTroy & TeamWin for all their hard work making TWRP such a fantastic recovery
    16
    For those that missed it in the 1st post:

    PLEASE PLEASE BE VERY CAREFUL WITH SAFESTRAP!!
    MAKE A BACKUP OF STOCK RIGHT AFTER YOU GET SAFESTRAP INSTALLED SO THAT YOU HAVE SOME KIND OF DISASTER RECOVERY.
    THEN YOU CAN RESTORE IT TO A ROM-SLOT (AFTER YOU MAKE ONE).
    ONLY MODIFY ROM-SLOT FILES. LEAVE YOUR STOCK ROM ALONE!!



    KNOWN ISSUES WHEN USING ROM-SLOTS (The ROMs are kept on loop device mounted partitions)
    1. In theory you will lose an extra 3-4 percent battery compared to normal usage from 100% to 0% due to the extra read/write work involved when using ROM-slots.
    2. The /data partition is kept separate from the "/sdcard" contents on SS ROMs. This causes the Storage settings to only show the size of the loopback data partition and then it shows "used" which includes the "sdcard" + /data so this can look odd at times (larger usage than partition size). It doesn't have any adverse affects that I know of.
    3. No custom kernel flashing support at this time. Don't try it. It won't work. All kernels need to be signed by Amazon at the moment.

    CHANGELOG:
    • [v3.75-B02]Bugfix rom-slot booting
    • [v3.75-B01]TWRP 2.7.1.0 update + display fix for 13.3.2.3.2/13.3.2.4
    • [v3.72]TWRP 2.7.0.0 update. *** This includes a bugfix for backup time showing correctly ***
    • [v3.72]Raised /data partition size to 16gb
    • [v3.72]Swapped "Reboot" -> "Download" mode to "Reboot" -> "Bootloader" (places you in fastboot mode)
    • [v3.70-B01]Seems like I have a solid fix for the "snow" effect when getting into Safestrap sometimes
    • [v3.70-B01]System partition now matches stock EXACTLY. You can't even change it in the settings due to the way I'm creating it during rom-slot creation. It's not a bug, that's on purpose. That being said, there should be plenty of room in that space to do what we want.
    • [v3.70-B01]Battery % now being displayed correctly in recovery
    • [v3.70-B01]Updated to latest Safestrap sources
    • [v3.65-B01]Initial release for Thor (Kindle HDX 7")
    9
    I just saw the posts regarding the new update woes.

    I may need a day or 2 to debug the update... I'm always nervous when patching Amazon's stuff.

    I also need to d/l the new sources as well.

    Sent from my SM-N900V using Tapatalk
    8
    Safestrap update for those on 13.3.2.3.2/13.3.2.4 ONLY

    HOW DO I UPGRADE SAFESTRAP?
    • Push the APK up to your sdcard.
    • Boot back into the "stock" rom-slot.
    • Go into your old Safestrap app and use the "Uninstall Recovery" button
    • Open an "explorer" of some sort (ESFileExplorer, etc)
    • Browse to where you pushed the APK
    • Click on it and install like normal
    • Once installed, open the APK
    • Grant SU access
    • Use the "Install Recovery" button
    • All set, now you can reboot and re-activate whatever rom-slot you were using

    CHANGELOG:
    • [v3.75]TWRP 2.7.1.0 update + display fix for 13.3.2.3.2/13.3.2.4

    DOWNLOADS:
    CONFIRM YOUR STOCK OS VERSION BELOW AND THAT YOU ARE USING THE KINDLE FIRE HDX 7" (THOR)
    [13.3.2.3.2 and later] LATEST FILE: Safestrap-Thor-3.75-os3.2.4-B01.apk
    Mirror 1: Crackflasher Download
    Mirror 2: Goo.im Download (May not be showing up here yet)

    Enjoy
    7
    Updated the OP for a new v3.70 build for the Kindle Fire HDX 7" (ONLY!)

    DOWNLOADS:
    CONFIRM THAT YOU ARE USING THE KINDLE FIRE HDX 7" (THOR) DEVICE (8.9" NOT SUPPORTED ATM)
    LATEST FILE: Safestrap-Thor-3.70-B01.apk
    Mirror 1 (Goo.im) http://goo.im/devs/Hashcode/thor/safestrap

    [ NOTE: RECREATE ALL ROM-SLOTS FOR v3.70, SIZE INCREASED / PROCESS CHANGED ]


    CHANGELOG:
    • [v3.70-B01]Seems like I have a solid fix for the "snow" effect when getting into Safestrap sometimes
    • [v3.70-B01]System partition now matches stock EXACTLY. You can't even change it in the settings due to the way I'm creating it during rom-slot creation. It's not a bug, that's on purpose. That being said, there should be plenty of room in that space to do what we want.
    • [v3.70-B01]Battery % now being displayed correctly in recovery
    • [v3.70-B01]Updated to latest Safestrap sources


    Here's an amazon-os-13.3.1.0 .zip that can be used on rom-slots for re-flashing the OS:
    Download from goo.im
    md5sum: 24fee10d8c6b0dbf583465baa938e842

    It's the straight Amazon OS:
    • not DeOdexed
    • will not stop OTAs
    • is not rooted
    • the only changes I made, were to strip out the boot.img or modem.img flashing stuff.

    To root, I recommend flashing SuperSU.zip from here and flash in Safestrap to the active rom-slot after flashing the ROM:
    http://download.chainfire.eu/supersu

    I'm guessing devs can grab that .zip and modify it till their hearts content.