Thread closed.

[Yank555]

A few new features this time...

Lulzactiveq :

I've tested it for one day, lulzactiveq feels snappier than stock pegasusq to me, but it's also slightly more battery thirsty, so it's up to you if you want more power or longer battery...

row scheduler :

As always, the difference is hard to tell on normal use, you try or you bench like crazy and tell me

CIFS :

For those mounting CIFS shares to their device, mount and umount now will be overridden by the ramfs's own, as such they just will work (no more 'invalid argument', whatever busybox you have installed on your system. This might be extended to more commands in the future, as needed.

---------------------------------------------------------------------------------------------------

Changelog v1.3e

• added lulzactiveq governor (credits Gokhanmoral, Roberto, Tegrak and AndiP71, as per request by Shaitan on www.android-hilfe.de)
• added ROW scheduler (credits Tatyana Brokhman, as per request by Enrico0802 on www.android-hilfe.de)
• removed hardcore sharpness fixes
• added mount/umount (busybox) to ramdisk in /sbin for 100% cifs mount compatibility
• default installation modes have been updated :
  
  • Yank555.lu :
    • CPU : 1.6GHz, LulzactiveQ
    • I/O : 512Kb readahead buffer, row scheduler
    • LMK : Medium
    • Swap : hardswap, no zram, swappiness 70
    • Fastcharge : enabled, 1000mA USB & AC
    • Soundlevel : speaker +3, stock for headphones
    • Dynamic fsync : enabled
    • CIFS kernel modules : enabled
    • Flash : ask
    • init.d support : no
  
  
• Download link (MD5 0ad8852a3a741c6500e822884e92886e)

 

[ole12]

When people get aosp working, will there be any yank kernel supporting aosp.
(currently downloading the ported PA aosp)

Sent from my GT-I9300 using Tapatalk 2

 

[Yank555]

When people get aosp working, will there be any yank kernel supporting aosp.
(currently downloading the ported PA aosp)

Sent from my GT-I9300 using Tapatalk 2

Well this one should run on AOSP (has been reported for some).

But I suppose you mean 4.2 AOSP (or CM10.1) ?

Nothing in the pipeline for now, I didn't even take the time to look into what kind of work it would be yet.

But it's only a matter of time, and since my daily is a CM-PA, and I'd be happily going to AOSPA, so I'd say there's a very good chance

JP.

 

[Yank555]

Hi,

Let me wish you and your families a merry christmass !

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3e Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

 

[DroidRevenge]

Hi,

Let me wish you and your families a merry christmass !

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3e Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

Merry Xmass to you and all mates here on XDA!

 

[salvatore94]

Tried this kernel forma about 3 days and I'd to say that is very fast band smooth...
But is so battery ungry.. With the others I used to heavy undervolt both CPU band GPU, so I would ask if you plans to add the UV support later...

Anyways thanks for your hard work and of corse Marry Christmas

Inviato dal mio GT-I9300 con Tapatalk 2

 

[Yank555]

Tried this kernel forma about 3 days and I'd to say that is very fast band smooth...
But is so battery ungry.. With the others I used to heavy undervolt both CPU band GPU, so I would ask if you plans to add the UV support later...

Anyways thanks for your hard work and of corse Marry Christmas

No UV is planned, it makes really no measurable difference in battery life (tested it long time myself) it only brings instability, and fills the thread with reboot / freeze reports

Have you seen the battery life I get with it (post 5) ?

http://xdaforums.com/showpost.php?p=34465084&postcount=5

Merry Christmass to you, too

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3f Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

 

[efattal]

Yank555.lu CM10 kernel v1.3f Aroma '

V 1.3f?

Sent from my GT-I9300 using xda app-developers app

 

[Yank555]

V 1.3f?

Sent from my GT-I9300 using xda app-developers app

Yep, nothing much, just tested removing the exynos-mem sysfs interface completely (closing the security hole completely) and checking if that doesn't break anything ... shouldn't on CM10 (AOSP/AOKP) anyway.

So no change in functionality / performance ... just a safety update.

If you want to test it, it's already up in my batcave (see my signature). Any feedback is welcome

If it behaves in the next few days, I'll put it up in the op.

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3f Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

 

[salvatore94]

No UV is planned, it makes really no measurable difference in battery life (tested it long time myself) it only brings instability, and fills the thread with reboot / freeze reports

Have you seen the battery life I get with it (post 5) ?

http://xdaforums.com/showpost.php?p=34465084&postcount=5

Merry Christmass to you, too

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3f Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

wow great battery life!!

I've seen that you're using JuiceDefender, could I ask your settings? I think that if is set in the right way, it could help to save a lot of battery...

Also are you using modded brightness levels?

 

[Yank555]

wow great battery life!!

I've seen that you're using JuiceDefender, could I ask your settings? I think that if is set in the right way, it could help to save a lot of battery...

Also are you using modded brightness levels?

In the meantime I replaced JD by two apps a few days ago, BetterWiFiOnOff and SmartSettings (mobile data), am still testing those. But I set them more or less the same as I used to set JD :

WiFi and Data off when screen off, activated once every 30 mins.

For brightness I use Lux, not to keep screen darker to save juice, but for it's sub-zero mode as I found the display too bright in the dark, hurt my eyes

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3f Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

 

[efattal]

Yep, nothing much, just tested removing the exynos-mem sysfs interface completely (closing the security hole completely) and checking if that doesn't break anything ... shouldn't on CM10 (AOSP/AOKP) anyway.

So no change in functionality / performance ... just a safety update.

If you want to test it, it's already up in my batcave (see my signature). Any feedback is welcome

If it behaves in the next few days, I'll put it up in the op.

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3f Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

Testing v1.3f

 

[ginodp]

In the meantime I replaced JD by two apps a few days ago, BetterWiFiOnOff and SmartSettings (mobile data), am still testing those. But I set them more or less the same as I used to set JD :

WiFi and Data off when screen off, activated once every 30 mins.

For brightness I use Lux, not to keep screen darker to save juice, but for it's sub-zero mode as I found the display too bright in the dark, hurt my eyes

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3f Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

Doesn't more apps take up more juice? Like Lux, do you only use it for night times. I am using it only for night times.


Verstuurd van mijn GT-I9300 met Tapatalk

 

[Yank555]

Doesn't more apps take up more juice? Like Lux, do you only use it for night times. I am using it only for night times.

I have lux on dynamic all the time. Well the usage in post 5 is with 160+ apps installed, and lux is always on my S3.

If the apps know to behave and are properly programmed they won't use much juice.

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3f Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

 

[salvatore94]

I'm thinking about use swap. If I would try the hardswap metod, I need to create the swap partition? And won't be better to use a dynamic pagefile as swap partition, like on windows OS?

Inviato dal mio GT-I9300 con Tapatalk 2

 

[Yank555]

I'm thinking about use swap. If I would try the hardswap metod, I need to create the swap partition? And won't be better to use a dynamic pagefile as swap partition, like on windows OS?

Can be done, but a dedicated partition is a clean block device without filesystem overhead. Plus I don't like having files lying around my data

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3f Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

 

[drdoulittle]

So the original Camera from S3 works fine with the Yank555lu 2.8e and 2.8F. Manual focusing and shooting with language without flash and with flash work for me under the DarkyRom v2.8 and Yank555lu 2.8F with no Problems.

What I can not test is because I have no HDMI cable for HDMI and never use on your smartphone.


oh sorry is not the Thread for Yank555lu 2.8 e / f ...

I'm Change the Thread....Yank

 

[Pete_79]

Hey Yank, great work as always, have been using your kernel for a while now, but yesterday I flashed cm10.1.
Will your kernel support android 4.2.1?

Thanks bud.

Sent from my GT-I9300 using xda premium

 

[Yank555]

Hey Yank, great work as always, have been using your kernel for a while now, but yesterday I flashed cm10.1.
Will your kernel support android 4.2.1?

Thanks bud.

Sent from my GT-I9300 using xda premium

I'll look into it, but I'm quite busy for the moment ... but eventually yes, as I'll be heading there as well anyway

JP.

Sent from my custom Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.3f Aroma (Linux 3.0.57) powered Galaxy S3 i9300 using Tapatalk 2

 

[Yank555]

It's been "semi-out" and I think it's time to just make it official

Changelog v1.3f

• added support for XBOX 360 gamepad (modules loadable by Aroma option, as per request by 4ndr0 on www.android-hilfe.de)
• removed /dev/exynos-mem alltogether since it can't be used anyway with chmod 400
• in Aroma, predefined presets now only change defaults, but you can review the exact settings and change any if you want
  
  
• Download link (MD5 8aa4c9739d5f10d9bab6c0002abba1e7)