Tincore keymapper run perfect on Remix OS 2.0.202 and latest 3.0

[arts821]

Remix OS 2.0.202 and latest 3.0 now support tincore keymapper perfectly, on Remix OS beta(2.0.201), tincore keymapper can run but there is a problem with the "touch focus" which only focus on the mouse pointer, not on the target keymapp, but in Remix OS version 2.0.202 developer has fix this and for gamers this is a very good thing, thanks to the dev for this:good:

* Install Remix OS 2.0.202 rooted, install appops from PlayStore, enable "draw on top" in tincore apps, and now we can simulate multitouch touch screen Remix OS

note: some report it only work in 32bit remix os and i never try 64 bit rmxos and maybe u should wipe data.img in order to do this,

 

[crackhead666]

I am still not able to simulate touch. :|
It keeps focusing on the mouse pointer.
Any help?

 

[arts821]

I am still not able to simulate touch. :|
It keeps focusing on the mouse pointer.
Any help?

use Remix OS 2.0.202 latest update, 32 bit stock Remix OS has native root feature so we not replace or modified any file on system

 

[crackhead666]

I just install the latest update and I am good to go, right?
Or should I follow some procedure in order to root it?

 

[arts821]

I just install the latest update and I am good to go, right?
Or should I follow some procedure in order to root it?

replace init.img file with init file has R/W system on it, some report it only work with 32 bit version remix os, but idk, never try 64 bit version

 

[kritingode]

replace init.img file with init file has R/W system on it, some report it only work with 32 bit version remix os, but idk, never try 64 bit version

hello dude.
can you tell me how to update to the latest OTA?
because seems like on my 32bit remix os it didn't receive ota updates ini setting.

i've run .102 version (from official jide site) and not update yet.

or maybe can you share yours remix folder for me (except data.img)

thanks

Sent from my K46CB using Tapatalk

 

[arts821]

hello dude.
can you tell me how to update to the latest OTA?
because seems like on my 32bit remix os it didn't receive ota updates ini setting.

i've run .102 version (from official jide site) and not update yet.

or maybe can you share yours remix folder for me (except data.img)

thanks

Sent from my K46CB using Tapatalk

My network is bad for uploading file, try klik 5 times at "Remix is version" in about page in setting until it show "unlock additional unstable update" feature, then klik "option" in update page ,u will see additional update at bottom.

 

[kritingode]

My network is bad for uploading file, try klik 5 times at "Remix is version" in about page in setting until it show "unlock additional unstable update" feature, then klik "option" in update page ,u will see additional update at bottom.

thank you..

Just saying.
confirmed tincore keymapping work perfectly on 32 bit.

but not in 64 bit.

Sent from my K46CB using Tapatalk

 

[arts821]

thank you..

Just saying.
confirmed tincore keymapping work perfectly on 32 bit.

but not in 64 bit.

Sent from my K46CB using Tapatalk

good good, enjoy it tincore should work in 64 bit its just a problem of link dependency of lib betwen 32 bit and 64 bit, that make problem to call the root

 

[[email protected]]

good good, enjoy it tincore should work in 64 bit its just a problem of link dependency of lib betwen 32 bit and 64 bit, that make problem to call the root

How does his work on 64 bit

 

[TheBasterd]

A better method.

1) Download latest Remix OS.
2) Install it.
3) It is pre-rooted with in-built root manager. Rejoice and praise Lord Gaben. Half Life 3 confirmed.
4) Press Alt+F1. It will open the console.
5) Type the following:

appops set com.tincore.and.remapper SYSTEM_ALERT_WINDOW allow

6) Press Alt+F7.
7) Tincore mapper works flawlessly. Rejoice and praise Lord Gaben , our lord and saviour. Again.

---------- Post added at 07:10 PM ---------- Previous post was at 07:06 PM ----------

BONUS STUFFS ABOUT TINCORE:

Using with PS3 Controller in conjugation with Sisaxis Enabler:

The way tincore works is simple. Press a button on the controller, and the corresponding software button will appear on the screen. Using the muse, place it where you desire the touch simulation of that software button to appear. Once done, do it with all the buttons on the controller, save it in a profile and then use the profile to play a non-gamepad enabled game.

The app is great, though, badly executed and sometimes very frustrating. But, for a free app, you cannot ask for more.

Hope this helps. If not, praise Lord Gaben.

Regards

TheBasterd

 

[crackhead666]

Even after updating to 2.0.202 32 bit, tincore seems to focus on mouse when I click on a button and select "touch screen".
Am I doing something wrong?

 

[kritingode]

A better method.

1) Download latest Remix OS.
2) Install it.
3) It is pre-rooted with in-built root manager. Rejoice and praise Lord Gaben. Half Life 3 confirmed.
4) Press Alt+F1. It will open the console.
5) Type the following:


6) Press Alt+F7.
7) Tincore mapper works flawlessly. Rejoice and praise Lord Gaben , our lord and saviour. Again.

---------- Post added at 07:10 PM ---------- Previous post was at 07:06 PM ----------

BONUS STUFFS ABOUT TINCORE:

Using with PS3 Controller in conjugation with Sisaxis Enabler:

The way tincore works is simple. Press a button on the controller, and the corresponding software button will appear on the screen. Using the muse, place it where you desire the touch simulation of that software button to appear. Once done, do it with all the buttons on the controller, save it in a profile and then use the profile to play a non-gamepad enabled game.

The app is great, though, badly executed and sometimes very frustrating. But, for a free app, you cannot ask for more.

Hope this helps. If not, praise Lord Gaben.

Regards

TheBasterd

thanks for the method.
at least download appops from playstore is not really necessary.

Even after updating to 2.0.102 32 bit, tincore seems to focus on mouse when I click on a button and select "touch screen".
Am I doing something wrong?

2.0.102 still broken.
just download a new one (202)from jide site. it has 32 bit version too,

Sent from my K46CB using Tapatalk

 

[deepakrt]

thanks for the method.
at least download appops from playstore is not really necessary.


2.0.102 still broken.
just download a new one (202)from jide site. it has 32 bit version too,

Sent from my K46CB using Tapatalk

A better method.

1) Download latest Remix OS.
2) Install it.
3) It is pre-rooted with in-built root manager. Rejoice and praise Lord Gaben. Half Life 3 confirmed.
4) Press Alt+F1. It will open the console.
5) Type the following:


6) Press Alt+F7.
7) Tincore mapper works flawlessly. Rejoice and praise Lord Gaben , our lord and saviour. Again.

---------- Post added at 07:10 PM ---------- Previous post was at 07:06 PM ----------

BONUS STUFFS ABOUT TINCORE:

Using with PS3 Controller in conjugation with Sisaxis Enabler:

The way tincore works is simple. Press a button on the controller, and the corresponding software button will appear on the screen. Using the muse, place it where you desire the touch simulation of that software button to appear. Once done, do it with all the buttons on the controller, save it in a profile and then use the profile to play a non-gamepad enabled game.

The app is great, though, badly executed and sometimes very frustrating. But, for a free app, you cannot ask for more.

Hope this helps. If not, praise Lord Gaben.

Regards

TheBasterd

what is difference between both version. Does 32 bit version have any cons 64 bit processor. like performance feature or anything.

 

[arts821]

what is difference between both version. Does 32 bit version have any cons 64 bit processor. like performance feature or anything.

no differen, its just 64 bit can handle more memory than 32 bit version

 

[crackhead666]

I downloaded 2.0.202 32 bit(direct download) from jide website. I installed tincore and when I press on a key and select "touch screen", it is still acting as left click for mouse pointer.

Is there any way I can fix this?

 

[crackhead666]

Bump

 

[deepakhope]

Bump

what bump?

 

[akbaryahya]

Use Remix OS 2.0.202 but still focusing on mouse pointer :crying:
can someone help me? how to fix focusing on mouse pointer

 

[momoh94]

Use Remix OS 2.0.202 but still focusing on mouse pointer :crying:
can someone help me? how to fix focusing on mouse pointer

You should download "Remix OS for PC Hacked Edition v2.0.202" (32-bit) from this forum: http://forum.xda-developers.com/remix/remix-os/remix-os-pc-hacked-edition -ota-v2-0-201-t3345968
and copied the "initrd.img" file in your RemixOS folder.