Titan Radio ROM 3.42.50
- Thread starter dcd1182
- Start date
Anything need to be done with the A-key or other numbers in EPST? And... look at you... teasing us with dcd 3.2.6.... What's up with that? LOL
Last edited:
DV8
Senior Member
Upgraded radio rom did not need to get a new A key and I am sitting in a concrete room with no windows and am picking up 4 satellites off the HTC GPS tool, will continue to test the gps and see it I continue to get a good to great signal. So far am impressed with this radio much faster gps lock than with 3.42.30. Thanks dcd....
I am picking up 4 to 5 satellites with the GPS tool within 5 to 10 seconds. I think I will stay with this radio for awhile.....
Just to relate to the difference with these 2 radio roms 3.42.30 and 3.42.50, with the .30 rom I could never pickup a satellite in my concrete bunker for an office but am picking up and locking onto 4 to 5 satellites within seconds on the .50 rom...
I am picking up 4 to 5 satellites with the GPS tool within 5 to 10 seconds. I think I will stay with this radio for awhile.....
Just to relate to the difference with these 2 radio roms 3.42.30 and 3.42.50, with the .30 rom I could never pickup a satellite in my concrete bunker for an office but am picking up and locking onto 4 to 5 satellites within seconds on the .50 rom...
Last edited:
I figured that being I already had a GPS radio on it that this wouldn't change anything. Thanks. Loading as I type.
Edit: I cannot even get Google Maps to Initialize GPS now. I have the same settings as before. I will try to switch it to 911... then to location on... and see what that does.
I had BAF's GPSToggle on... turned it off... and Google Maps "Initialize GPS" does go away now. But... it still is taking forever (more than a minute) to get any syncs
Edit: Ok... ON a fresh boot. Shutting the phone off and turning it back on... It takes more than a minute to initialize the GPS. Once this is done. I can turn the Toggle off... / Exit Google Maps... and the next time I start either application... it locks in seconds.
Last edited:
I can't test very well in my building, but I see that ephemeris data is rolling and it sees some information. Seems typical so far but I will report back.
Good news for another issue though, I did test and found out that the call waiting thing (annoying sound) didn't happen after flashing this radio. I had 3.42.30 loaded this morning and got the sound. I flashed to 3.42.50 and it didn't happen just now. Not sure if this is coincidence but good anyways.
Good news for another issue though, I did test and found out that the call waiting thing (annoying sound) didn't happen after flashing this radio. I had 3.42.30 loaded this morning and got the sound. I flashed to 3.42.50 and it didn't happen just now. Not sure if this is coincidence but good anyways.
finally
I finally went and got a 2gb Micro-SD card from Fry's yesterday. Flashed from SD card and took like 2 minutes. Way better than USB!
Thanks for the Radio DCD!
I finally went and got a 2gb Micro-SD card from Fry's yesterday. Flashed from SD card and took like 2 minutes. Way better than USB!
Thanks for the Radio DCD!
Nope. You can flash via USB. Follow the steps found in the Titan Recent Wiki here... Titan RecentIs flashing via SD the only way? either my card or adapter is on the fritz
Thanks, I know how to flash via USB too but i've read sometimes flashing radios doesn't always work that way.
Gotcha. Yeah... when I first did my phone.... that's how I did it. Via USB. I didn't have a regular SD card. I had no issues doin it that way.
Nope. i updated to 2.40 from the stock 1.04 like the Wiki said. Then went to the radio 3.42.30 after the Hard_SPL update.
As far as going to 3.42.50... I just did the SD card way since I have a non SDHC card now.
I couldn't do .30 via USB, and can't do .50 either. The RUU utility runs, gets to 8%, a red light flashes on my phone, and it reboots.
To update the radio via USB, I *think* you need to go back to 1.20. Don't quote me on that though, because my memory sucks. I'm to old to be hacking phones!
That's exactly what I was trying to figure out. I flash everything with microsd so I'm not about to test it. Was waiting for someone who flashes via USB to test it.
Just a note to everyone reading this, if you follow those wiki instructions and flash via USB, you need to use TitanUnlocker first to install SPL 1.20, flash the radio, then reinstall SPL 2.40. Same as Radio 3.42.30 USB installation.
It was tricky getting the Software to recognize the phone without activesync. But... I followed the Titan Recent wiki. And did have 2.40 on the phone when I did the Radio update.I couldn't do .30 via USB, and can't do .50 either. The RUU utility runs, gets to 8%, a red light flashes on my phone, and it reboots.
To update the radio via USB, I *think* you need to go back to 1.20. Don't quote me on that though, because my memory sucks. I'm to old to be hacking phones!
I remember now.... I had to wait until someone put out the .30 exe to install via USB. Don't know why, but that method worked for .30 for me. Guess I'll have to wait until someone makes the exe again, for .50
New posts
-
Mediatek device porting (X6815C Ant-Man and the Wasp: Quantumania Edition)- Latest: notreal456789
-
