[TOOL] Fix Freezed Screen/Camera Issue With Unlocked Bootloader by nheolinkin

After apply these tweaks, how is your device?

  • It's not freezed anymore

    Votes: 33 51.6%
  • It's still freezed but less than usual

    Votes: 11 17.2%
  • It does not change much

    Votes: 20 31.3%

  • Total voters
    64

tranxuanthang

Member
Jun 1, 2016
17
1
0
Perhaps you use the tool too many times without read my instructions, it's gonna mess up your system cmdline file then your device will never boot.
It happened the very first time i ran the tool. The 2nd time, I reflashed the ROM file, and my phone booted up again, then I ran the tool, then still the same. The third time, I reflashed just boot.img to reduce the waiting, then manually type the commands, and it works.
Not sure why but after "type cmdline_add >> cmdline" command, the cmdline contents is like this. Maybe my PC is infected with viruses or something?
Code:
湩瑩⼽湩瑩瀠楣渽敯牡祬挠湯潳敬琽祴こ挠湯潳敬氽杯に攠牡祬牰湩歴渽汯杯敧⁲潢瑯灵甮牡㵴‰潬汧癥汥㠽欠敭汭慥㵫景⁦湡牤楯扤潯⹴敳楬畮㵸数浲獩楳敶愠摮潲摩潢瑯戮潯浴摥慩猽捤牡⁤湡牤楯扤潯⹴慨摲慷敲爽摥潨歯慢⁹慷捴摨杯眮瑡档潤彧桴敲桳㘽‰湡牤楯扤潯⹴灳摩砽硸㩸硸硸砺硸㩸硸硸砺硸㩸硸硸愠摮潲摩潢瑯献牥慩湬㵯㄰㌲㔴㜶㤸㄰㌲㔴㜶㤸椠㵰〵〮〮㈮㔺⸰⸰⸰㨱㈺㔵㈮㔵㈮㔵〮㨺獵ぢ漺浶污潬㵣㜱䴲戠極摬慶楲湡㵴獵牥敤畢੧ intel_scu_watchdog.disable_kernel_watchdog=1 acpi=off apm=off pnpbios=off nomodeset i915.modeset=0 intel_idle.max_cstate=0 idle=mwait apparmor=0
 

AhZhi

Senior Member
Dec 21, 2013
75
9
0
It happened the very first time i ran the tool. The 2nd time, I reflashed the ROM file, and my phone booted up again, then I ran the tool, then still the same. The third time, I reflashed just boot.img to reduce the waiting, then manually type the commands, and it works.
Not sure why but after "type cmdline_add >> cmdline" command, the cmdline contents is like this. Maybe my PC is infected with viruses or something?
Code:
湩瑩⼽湩瑩瀠楣渽敯牡祬挠湯潳敬琽祴こ挠湯潳敬氽杯に攠牡祬牰湩歴渽汯杯敧⁲潢瑯灵甮牡㵴‰潬汧癥汥㠽欠敭汭慥㵫景⁦湡牤楯扤潯⹴敳楬畮㵸数浲獩楳敶愠摮潲摩潢瑯戮潯浴摥慩猽捤牡⁤湡牤楯扤潯⹴慨摲慷敲爽摥潨歯慢⁹慷捴摨杯眮瑡档潤彧桴敲桳㘽‰湡牤楯扤潯⹴灳摩砽硸㩸硸硸砺硸㩸硸硸砺硸㩸硸硸愠摮潲摩潢瑯献牥慩湬㵯㄰㌲㔴㜶㤸㄰㌲㔴㜶㤸椠㵰〵〮〮㈮㔺⸰⸰⸰㨱㈺㔵㈮㔵㈮㔵〮㨺獵ぢ漺浶污潬㵣㜱䴲戠極摬慶楲湡㵴獵牥敤畢੧ intel_scu_watchdog.disable_kernel_watchdog=1 acpi=off apm=off pnpbios=off nomodeset i915.modeset=0 intel_idle.max_cstate=0 idle=mwait apparmor=0
Maybe u can try to add the command manually by using notepad++, remember edit with notepad++
 
  • Like
Reactions: tranxuanthang

nheolinkin

Senior Member
Feb 11, 2016
279
125
0
Hanoi
It happened the very first time i ran the tool. The 2nd time, I reflashed the ROM file, and my phone booted up again, then I ran the tool, then still the same. The third time, I reflashed just boot.img to reduce the waiting, then manually type the commands, and it works.
Not sure why but after "type cmdline_add >> cmdline" command, the cmdline contents is like this. Maybe my PC is infected with viruses or something?
If tool not work for you then just wait. I'll try to fix that.
Also, I said use tool "for each KERNEL" but not "for each ROM", so perhaps you should reflash KERNEL instead of reinstalling ROM.

EDITED: Tool has been updated. Now it can be used in any Roms.
 
Last edited:
  • Like
Reactions: tranxuanthang

AhZhi

Senior Member
Dec 21, 2013
75
9
0
If tool not work for you then just wait. I'll try to fix that.
Also, I said use tool "for each KERNEL" but not "for each ROM", so perhaps you should reflash KERNEL instead of reinstalling ROM.

EDITED: Tool has been updated. Now it can be used in any Roms.
Ehm, for camera not working problem, is this posible to fix it?
 

Boomshiva

Senior Member
Nov 19, 2015
1,972
1,402
0
Mumbai
Why is it so hard and confusing for all the users the author of this thread has already given a "clear written instructions" on post #2 . Just follow that else use the search button for any enquiry as most of the "unclear things" have been cleared in comments section . @nheolinkin i request you post a video tutorial or a picture by picture tutorial for the users if possible . Thank you . You did a fantastic job
 
  • Like
Reactions: nheolinkin

nheolinkin

Senior Member
Feb 11, 2016
279
125
0
Hanoi
TOOL UPDATED: 15/07/2017
For anyone still can not use the tool to apply tweaks, I'm truly sorry
I was totally lazy at testing the tool since I've patched my kernel already. So today I decided to test the tool myself because quite fews people complained about it.
And... yeh, it's finally done. Latest version was out, this could be the last version for "freezing issue".
Now everyone can use it in any Roms but it's not gonna be 1-Click tool as I used to want it to be.

Thanks to all
Have a nice day!
 
Last edited:

AhZhi

Senior Member
Dec 21, 2013
75
9
0
hw2056 module supposed to be enabled. It's one of camera module
I will update it in #2 post. This could be the point.
Thank You:) This is the screenshot of Lsmod
And in second post , that kernel is for stock rom only?
I am in Lineage OS, can you tell me how to enable manually?
 
Last edited:

BeeNeX

Member
Jul 16, 2017
29
12
0
Im sure for 99% unofficial unlock doesnt couse freezing on 4.4, i used official only one time, but unofficial is just flashing ifwi and dnx from officiall firmware.
Freezes happen on 4.4 even after locking the bootloader if you've flashed dnx and ifwi from other sources and are reverting to stock 4.4. Sometimes it doesn't if the bootloader matches but when it does the best solution is to flash 1.17.40.16 boot , fastboot and recovery files and then flashing the ROM in recovery and then following exact same procedure with 4.4 ROM's files.