THIS IS OLD OUTDATED METHOD AND WILL HAVE NO SUPPORT.
SEE AUTOPRIMES THREAD FOR CURRENT METHOD.
https://forum.xda-developers.com/showthread.php?t=3308227
**************
Here's my "One Click" method to get TWRP onto the G4 H811.
Special thanks to the following:
**Originally script written and tools by avicohh, modified by MicroMod777 to work only on H811.
**Special thanks to Manh_IT and RenaKunisaki for help getting correct flash commands.
**Special thanks to Unjustified Dev for TWRP.
**Special thanks to Team Codefire and vn_mobile for root.
PREREQUISITES:
**Must be on T-Mobile USA LG G4 H811 10H. WILL NOT WORK ON 10N. DO NOT DOWNGRADE TO 10H OR YOU WILL BRICK.
**Must have LG drivers installed and USB debugging enabled
**Windows computer
**OEM Unlocked in Developer Options.
Instructions:
Step 1: Plug phone to computer.
Step 2: Unzip H811-One-Click.zip
Step 3: Press CLICK-HERE-LG-G4-H811-UNLOCK-TWRP.bat to begin
Step 4: Phone will reboot a few times
Step 5: Pull battery after 1 minute only when on screen instructions say so.
Downloads:
****WARNING****ONLY FOR USA T-MOBILE G4 H811****YOU WILL BRICK****WARNING****
---->H811-One-Click.zip
****WARNING****ONLY FOR USA T-MOBILE G4 H811****YOU WILL BRICK****WARNING****
****WARNING****ONLY FOR USA T-MOBILE G4 H811****YOU WILL BRICK****WARNING****
---->H811-One-Click.zip
****WARNING****ONLY FOR USA T-MOBILE G4 H811****YOU WILL BRICK****WARNING****
MD5: 7640484c4842cb883a702d0e09d89c9e
Issues: This might take a few tries to run if the LG drivers don't fully install in download mode.
***If you still can't get it to work, uninstall all LG Drivers, reboot and install drivers from here: LG drivers
MANUAL MODE:
Step 1: Copy recovery.img to your internal storage.
Step 2: Pull battery, put back in. Press and hold Volume up and plug cable in. (Enter Download Mode)
Step 3: On your computer open up your Device Manager and look for:
**Ports (COM &LPT)
****LGE Mobile USB Serial Port (COM?)
Look for the port number in COM#! ?=#.
Example:LGE Mobile USB Serial Port (COM3). So mine is port 3.
Step 4: In your One-Click folder press Shift/Right-Click-Mouse and press "Open Command Window Here".
Step 5: Type Send_Command.exe \\.\COM? Make sure the ?=Port number from Step 2.
Example. Mine is Send_Command.exe \\.\COM3
Step 6: Type "id" without quotes and make sure this comes up: uid=0(root) gid=0(root) context=u:r:recovery:s0
Step 7: WARNING, IF YOU GET THIS PART WRONG OR DON'T USE H811 YOU CAN BRICK!
*****Type Flash command only for H811:
dd if=/data/media/0/recovery.img bs=8192 seek=35840 count=5120 of=/dev/block/mmcblk0
Step 8: Type: LEAVE
**Phone will reboot
DONE.....
Enter TWRP:Must be OEM Unlocked in Developer Options.
**In ADB: adb reboot recovert
or...
**Pull battery, put back in. Press and hold volume down/power. When LG Logo appears only let go power for a second and then press again till factory reset screen appears. Do factory reset to boot into TWRP. If you don't see TWRP run program again.
******************************************
To get root flash from TWRP:
Root SuperSU.zip
http://forum.xda-developers.com/showthread.php?t=1538053
Last edited: