[TOOL] MotoTool AIO(GPE,NON-GPE)Root,Recovery,Record,Relock,Backup-Restore Apps[v3.1]

Search This thread

alonsoch

Senior Member
May 28, 2012
579
813
0
Hidalgo Del Parral Chihuahu
2nrhjcm.jpg

Code:
#include 
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.Please
* do some research if you have any concerns about features included in this TOOL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/


FEATURES
Code:
*Flash stock recovery (kitkat)
*Flash stock recovery (JellyBean)
*Flash any recovery located at Data\Recovery
*Flash stock recovery (GPE)
*Download the latest version of cwm and twrp from the app(compatible with kitkat an GPE)
*Fix Boot Logo(KitKat)
*Fix Boot Logo(JellyBean)
*Fix Boot Logo(GPE)
*Reboot options(Normal,Fastboot,Recovery)
*CONVERT moto g to moto g GPE
*Root
*Backup your non-system apps
*Restore your non-system apps
*Record screen(change bit-rate, duration, name , etc)
*Install any .apk located at Data\Apk
*Dump info from device


REQUIREMENTS
*Time
*Read all the tutorial
*Moto g
*Usb debugging enabled
*Unlocked Bootloader (intstructions: https://motorola-global-portal.cust.../bootloader/unlock-your-device-a/action/auth )

HOW TO USE IT
You can fin all the information in this PDF:
INSTRUCTIONS
9tectd.png

2j61cu9.png

2rnbu41.png

2uppgg3.png


BUT, HOW ROOT MY DEVICE?
*Put your phone in normal mode(like always)
*Remember have checked usb debugging
*Push supuerSu to sd
*Flash custom recovery
*Boot to recovery from fastboot(down scroll, up select)
*Choose zip from sdcard
*Choose supersu.zip
*Flash it
*Reboot
you are ready....

DOWNLOAD

MotoTool 3.0
Code:
[URL="https://drive.google.com/file/d/0B9MUCjEugQjgazhuMEg5Vmw3bjA/view?usp=sharing"]Direct Download Via GDrive[/URL]

[URL="http://nevermindalonso.wix.com/mototool-aio"]Visit my webpage for mirrors, support and updates! Stay tuned![/URL]



So thanks to:
@Phil3759 for the [CWM Advanced Edition] PhilZ Touch
@a1Pha and @dhacker29 for the recovery == http://forum.xda-developers.com/showthread.php?t=2563599(CWM) , http://forum.xda-developers.com/showthread.php?t=2563599)TWRP
@regaw_leinad for the .dll Android Lib
@ffosilva for GPE CWM CWM for GPE
@denzel09 for the official images for GPE device.
@SystemErrorOne for the new app logo and banner.
@Chainfire for SuperSu
@Boss442 Remove "Padlock" on GPE Model
And maybe...... ME :D

Special Thanks To This People(Friends) For Help Me With Some Bucks(this make me feel like in the beginning of this project,with all the attitude)... :THANKS:
* @Marty
*marwan alani
*Michael Reibert
*Ahmad Alhudban
*Attila Puskas
*FoneWatcher
 
Last edited:

alonsoch

Senior Member
May 28, 2012
579
813
0
Hidalgo Del Parral Chihuahu
ISSUES
Code:
*None, waiting for one..

CHANGELOG
Code:
09/03/14
*Size of the tool now is approx 55 mb
*GUI updated
*Added the function for download recovery
*Added SysTab
*New Code

23/02/14
*Added the function to relock the bootloader(status code:2)(only tested on native GPE)

21/02/14
*Updated TWRP for NON-GPE devices (2.6.3.2, touch is fixed thanks to @dhacker29)
*Updated  CWM Advanced Edition for NON-GPE devices(6.13.9)
*Updated  CWM Advanced Edition for GPE devices(6.13.9)
*Added CWM Swipe(6.0.4.7, thanks to @dhacker29)

16/02/14
*Updated Ui for the panel drag and drop(install .apk)
*REMOVED restore function for NON-GPE firmware, sorry for this guys.. :(

15/02/14
*Backup your non-system apps
*Restore your non-system apps
*Record screen(change bit-rate, duration, name , etc)
*Install any .apk using drag and drop

12/02/14
*Fixed Restore Function on NON-GPE... all should work perfect..

10/02/14
*Added [CWM Advanced Edition] PhilZ Touch for KitKat
*Added [CWM Advanced Edition] PhilZ Touch for GPE
* Added CWM 6.0.4.6 for KitKat
*Added TWRP 2.6.3.1
*Added CWM and TWRP for JellyBean
*Added CWM  6.0.4.6 for GPE
*Added SuperSu 1.93

GPE FIRMWARE
Code:
[COLOR="Red"]REMEMBER EXTRACT YOUR FIRMWARE AND COPY ALL THE FILES TO GpeImage/ [/COLOR]
[URL]https://mega.co.nz/#!3dZB1YAR!Yd6J9Yg_rtSgSpAY8_ZyKJXtweiCzhkevlvKwnEfFN0[/URL]
Any mirror is welcome :D

HOW RESTORE MY DEVICE TO NON-GPE FIRMWARE
Code:
Well, i have removed this function for my tool because the new  firmwares don't include the .bat file, so if you want restore your device please go to this thread
[URL="http://forum.xda-developers.com/showthread.php?t=2542219"]Restore NON-GPE firmware[/URL]

Q&A
-Why i don't have signal when i convert to GPE?
Well this is a know issue to fix it flash your stock fsg, don't know how? don't worry.. copy your stock fsg and put it in the tool folder, then press shift+right click and select open window promp here and paste the next code one by one:

fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot

-I have done the previous steep and continue without signal!!
well, please go to this thread and flash your respective radio via recovery Flash radio using recovery

-Why i can't boot to recovery?
Remember in fastboot mode VolUp SELECT and VolDown SCROLL

-Why i can't install an apk using your tool?
Well, be sure that the apk name don't have spaces, and check if the path of your apk have spaces too... i suggest that: rename your apk (simpler name) EX. xxxxxx.apk (where xxxxx are the name) and move your apk to the desktop, then try again..

-How can i say thank you?
Just press the THANKS BUTTON :D
 
Last edited:

denzel09

Senior Member
Jun 28, 2009
4,215
874
243
Teheran
Very very cool man!

Will F2F file system of the stock Rom be changed to the GPE EXT4? I've heard that the GPE ext4 implimentation is inferior?

Nice work!

Same question, but probably yes.

Another: can you will add an option about radio to choice which of them to use? Example my moto g has en.eu version so it will be good if i will to have an option to choice directly from your tool that radio and so on..

Thanks
 

ohn42

Senior Member
Aug 25, 2013
122
38
0
Nürnberg
I have some questions:

What is the right sequence to use this tool?
- unlock
- flash recovery
- root
- install the rom
Would this work?
Is it possible to unroot and lock the device again in order to be able to use future OTA updates from Google?

Thank you for your feedback.
 
  • Like
Reactions: alonsoch

alonsoch

Senior Member
May 28, 2012
579
813
0
Hidalgo Del Parral Chihuahu
Same question, but probably yes.

Another: can you will add an option about radio to choice which of them to use? Example my moto g has en.eu version so it will be good if i will to have an option to choice directly from your tool that radio and so on..

Thanks

Sure buddy ,but I need the files ,I can't download all the original images,but I think you don't will have problems with this tool,I have signal and I live in mexico .. :D

Enviado desde mi XT1032 mediante Tapatalk
 
  • Like
Reactions: Hui91

alonsoch

Senior Member
May 28, 2012
579
813
0
Hidalgo Del Parral Chihuahu
I have some questions:

What is the right sequence to use this tool?
- unlock
- flash recovery
- root
- install the rom
Would this work?
Is it possible to unroot and lock the device again in order to be able to use future OTA updates from Google?

Thank you for your feedback.

You need unlock your bootloader first to use this tool,
Install the ROM
Install custom recovery
Push supersu
Boot into recovery and flash super su

If you want relock and unroot you need flash an stock image (4.4.2)... Why? Because this Images are unsigned and can't relock your boot loader

For the ota question,we dont now in this moment,we have all the necessary files to have ota, we need an ota upgrade and see if we can Install it direct from our device (we need stock recovery for this, I will add it)

Enviado desde mi XT1032 mediante Tapatalk
 

ohn42

Senior Member
Aug 25, 2013
122
38
0
Nürnberg
You need unlock your bootloader first to use this tool,
Install the ROM
Install custom recovery
Push supersu
Boot into recovery and flash super su

If you want relock and unroot you need flash an stock image (4.4.2)... Why? Because this Images are unsigned and can't relock your boot loader

For the ota question,we dont now in this moment,we have all the necessary files to have ota, we need an ota upgrade and see if we can Install it direct from our device (we need stock recovery for this, I will add it)

Enviado desde mi XT1032 mediante Tapatalk

Thanks a lot for your answer. I will give it a try. I´m just curious ;)
 

ohn42

Senior Member
Aug 25, 2013
122
38
0
Nürnberg
I'm curious too! This is why I make a tool I'm working in a new version, it will include all my other tools and a lot of extra things.. Just approx 100 mb.. I'm working on it !! ;)

Enviado desde mi XT1032 mediante Tapatalk

So I should wait for the new tool? Will you finish it soon?
 

ohn42

Senior Member
Aug 25, 2013
122
38
0
Nürnberg
Here is what I did:
I unlocked my Moto G
I flashed "Outside USA" image
I flashed CWM Recovery Error Message: mismatched partition size (recovery)
pushed SuperSu 2 SD
tried to reboot into recovery, but the Moto G rebootet normally and started the setup routine, what worked. But Moto G is not rooted.


What is my error? What did I wrong?
BTW: I have a German retail XT1032 8GB

Any ideas?
 

denzel09

Senior Member
Jun 28, 2009
4,215
874
243
Teheran
Here is what I did:
I unlocked my Moto G
I flashed "Outside USA" image
I flashed CWM Recovery Error Message: mismatched partition size (recovery)
pushed SuperSu 2 SD
tried to reboot into recovery, but the Moto G rebootet normally and started the setup routine, what worked. But Moto G is not rooted.


What is my error? What did I wrong?
BTW: I have a German retail XT1032 8GB

Any ideas?

That error happens to some users sometimes but cwm should work well. You must ask in cwm thread for better support about this particular problem.
 
  • Like
Reactions: ohn42

ohn42

Senior Member
Aug 25, 2013
122
38
0
Nürnberg
That error happens to some users sometimes but cwm should work well. You must ask in cwm thread for better support about this particular problem.

Thank you for your awsome fast reply!!!
Unfortunately I´m not even able to start CWM... :(

---------- Post added at 10:19 PM ---------- Previous post was at 09:33 PM ----------

Thank you for your awsome fast reply!!!
Unfortunately I´m not even able to start CWM... :(

Sorry to all.
My Fault. I was using the wrong key in fastboot mode to enter CWM.
I pressed the power button instead of the volume up as described. Now all is working fine.I have Moto G GPE, unlocked and rooted!
Thank you!!!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 300
    2nrhjcm.jpg

    Code:
    #include 
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed.Please
    * do some research if you have any concerns about features included in this TOOL
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    FEATURES
    Code:
    *Flash stock recovery (kitkat)
    *Flash stock recovery (JellyBean)
    *Flash any recovery located at Data\Recovery
    *Flash stock recovery (GPE)
    *Download the latest version of cwm and twrp from the app(compatible with kitkat an GPE)
    *Fix Boot Logo(KitKat)
    *Fix Boot Logo(JellyBean)
    *Fix Boot Logo(GPE)
    *Reboot options(Normal,Fastboot,Recovery)
    *CONVERT moto g to moto g GPE
    *Root
    *Backup your non-system apps
    *Restore your non-system apps
    *Record screen(change bit-rate, duration, name , etc)
    *Install any .apk located at Data\Apk
    *Dump info from device


    REQUIREMENTS
    *Time
    *Read all the tutorial
    *Moto g
    *Usb debugging enabled
    *Unlocked Bootloader (intstructions: https://motorola-global-portal.cust.../bootloader/unlock-your-device-a/action/auth )

    HOW TO USE IT
    You can fin all the information in this PDF:
    INSTRUCTIONS
    9tectd.png

    2j61cu9.png

    2rnbu41.png

    2uppgg3.png


    BUT, HOW ROOT MY DEVICE?
    *Put your phone in normal mode(like always)
    *Remember have checked usb debugging
    *Push supuerSu to sd
    *Flash custom recovery
    *Boot to recovery from fastboot(down scroll, up select)
    *Choose zip from sdcard
    *Choose supersu.zip
    *Flash it
    *Reboot
    you are ready....

    DOWNLOAD

    MotoTool 3.0
    Code:
    [URL="https://drive.google.com/file/d/0B9MUCjEugQjgazhuMEg5Vmw3bjA/view?usp=sharing"]Direct Download Via GDrive[/URL]
    
    [URL="http://nevermindalonso.wix.com/mototool-aio"]Visit my webpage for mirrors, support and updates! Stay tuned![/URL]



    So thanks to:
    @Phil3759 for the [CWM Advanced Edition] PhilZ Touch
    @a1Pha and @dhacker29 for the recovery == http://forum.xda-developers.com/showthread.php?t=2563599(CWM) , http://forum.xda-developers.com/showthread.php?t=2563599)TWRP
    @regaw_leinad for the .dll Android Lib
    @ffosilva for GPE CWM CWM for GPE
    @denzel09 for the official images for GPE device.
    @SystemErrorOne for the new app logo and banner.
    @Chainfire for SuperSu
    @Boss442 Remove "Padlock" on GPE Model
    And maybe...... ME :D

    Special Thanks To This People(Friends) For Help Me With Some Bucks(this make me feel like in the beginning of this project,with all the attitude)... :THANKS:
    * @Marty
    *marwan alani
    *Michael Reibert
    *Ahmad Alhudban
    *Attila Puskas
    *FoneWatcher
    129
    ISSUES
    Code:
    *None, waiting for one..

    CHANGELOG
    Code:
    09/03/14
    *Size of the tool now is approx 55 mb
    *GUI updated
    *Added the function for download recovery
    *Added SysTab
    *New Code
    
    23/02/14
    *Added the function to relock the bootloader(status code:2)(only tested on native GPE)
    
    21/02/14
    *Updated TWRP for NON-GPE devices (2.6.3.2, touch is fixed thanks to @dhacker29)
    *Updated  CWM Advanced Edition for NON-GPE devices(6.13.9)
    *Updated  CWM Advanced Edition for GPE devices(6.13.9)
    *Added CWM Swipe(6.0.4.7, thanks to @dhacker29)
    
    16/02/14
    *Updated Ui for the panel drag and drop(install .apk)
    *REMOVED restore function for NON-GPE firmware, sorry for this guys.. :(
    
    15/02/14
    *Backup your non-system apps
    *Restore your non-system apps
    *Record screen(change bit-rate, duration, name , etc)
    *Install any .apk using drag and drop
    
    12/02/14
    *Fixed Restore Function on NON-GPE... all should work perfect..
    
    10/02/14
    *Added [CWM Advanced Edition] PhilZ Touch for KitKat
    *Added [CWM Advanced Edition] PhilZ Touch for GPE
    * Added CWM 6.0.4.6 for KitKat
    *Added TWRP 2.6.3.1
    *Added CWM and TWRP for JellyBean
    *Added CWM  6.0.4.6 for GPE
    *Added SuperSu 1.93

    GPE FIRMWARE
    Code:
    [COLOR="Red"]REMEMBER EXTRACT YOUR FIRMWARE AND COPY ALL THE FILES TO GpeImage/ [/COLOR]
    [URL]https://mega.co.nz/#!3dZB1YAR!Yd6J9Yg_rtSgSpAY8_ZyKJXtweiCzhkevlvKwnEfFN0[/URL]
    Any mirror is welcome :D

    HOW RESTORE MY DEVICE TO NON-GPE FIRMWARE
    Code:
    Well, i have removed this function for my tool because the new  firmwares don't include the .bat file, so if you want restore your device please go to this thread
    [URL="http://forum.xda-developers.com/showthread.php?t=2542219"]Restore NON-GPE firmware[/URL]

    Q&A
    -Why i don't have signal when i convert to GPE?
    Well this is a know issue to fix it flash your stock fsg, don't know how? don't worry.. copy your stock fsg and put it in the tool folder, then press shift+right click and select open window promp here and paste the next code one by one:

    fastboot erase modemst1
    fastboot erase modemst2
    fastboot flash fsg fsg.mbn
    fastboot reboot

    -I have done the previous steep and continue without signal!!
    well, please go to this thread and flash your respective radio via recovery Flash radio using recovery

    -Why i can't boot to recovery?
    Remember in fastboot mode VolUp SELECT and VolDown SCROLL

    -Why i can't install an apk using your tool?
    Well, be sure that the apk name don't have spaces, and check if the path of your apk have spaces too... i suggest that: rename your apk (simpler name) EX. xxxxxx.apk (where xxxxx are the name) and move your apk to the desktop, then try again..

    -How can i say thank you?
    Just press the THANKS BUTTON :D
    14
    Hi to all!! :D

    i'm uploading a new version, i just add the function to flash the new boot logo "powered by android" so, stay tuned if this is important for you :D

    **edited**
    tomorrow i will update the op, but for now this is the link
    HIT ME!
    9
    SOME INFO

    Hi
    I will update the tool for suppot lollipop :D if some one have the factory images(official or unofficial please pm me)
    And btw i want show you my first themes for cm11

    BlueMerry
    GreenRadioactive
    Free version soon :D
    8
    Hi... I have bad news...
    Today I will sell my moto g and I will start to save money and buy a nexus 5 or something like that... Was great help to others,I really enjoy help with the Tool...
    So bye bye buddy's, I can't continue the developing for the moto g maybe if someone be my tester we can continue (maybe)... Thanks for all the feedback... See you soon.. And I hope you understand...

    And remember "working harder, make it better,do it faster" this is the key for everything...

    Enviado desde mi XT1032 mediante Tapatalk
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone