[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)

Search This thread

kakkooran

Senior Member
Mar 26, 2014
494
227
Cochin
You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)

MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
May 2018 Android patches

https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
https://www.androidfilehost.com/?fid=746163614322268729

Guide how to revive your op6:
First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.

Now you have to go in Windows test mode to not let him install default drivers, so:
windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.

Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (https://www.youtube.com/watch?v=PpLvmID1wdI)
Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
Now you should see qualcomm drivers under port (COM).

You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.

EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)

Please, consider to donate me something for the work and the risk (maybe idk). Thanks :)
https://www.paypal.me/Imadalek
Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
(Thanks to @nytebird for the contribution)

If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B
Huge thanks for this wonderful post.I did face a problem that it didn't show any os updates.everytime i checked showing that your system is up to date.When i tried local upgrade,its failed after some time.Any solution is appreciated
 

panateon

New member
Sep 8, 2020
1
0
Does anyone know how to flash OPPO A5 2018, i have PBAM00 China ver. ? Downloaded firmware and MSMDownload tool need login to work, I also tryed QFIL, but its showing SAHARA fail. I tryed numberles versions of MSMDWONLOAD Tool but nothing works. Sorry for posting here but I didnt find any post related with this model. If anyone knows anything about this phone please help . Thx.
 
Last edited:

rushabhmody

New member
Sep 22, 2020
1
0
Hi guys I tried the above but after the phone starts it shows the oneplus and android logo followed by a blank screen and white led. Please help!
 

Santhoshfelix

Member
Dec 9, 2020
19
0
i tried msm download tool with os 10.3.5 . the download is success and automatically reboot but stuck on one plus logo. i tried 10.3.2 version also. but same problem stuck at oneplus logo. anybody please help me :(
 

da_jan

Member
Aug 22, 2013
8
1
Hangs up on my PC and blocks Windows from restarting/shutting down. It also doesn't complete the job but hangs itself in the preload process. Cannot be stopped from running in task manager. Waste of time.
 

benswindel

Member
Jan 11, 2021
6
0
You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)

MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
May 2018 Android patches

https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
https://www.androidfilehost.com/?fid=746163614322268729

Guide how to revive your op6:
First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.

Now you have to go in Windows test mode to not let him install default drivers, so:
windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.

Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (
)
Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
Now you should see qualcomm drivers under port (COM).

You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.

EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)

Please, consider to donate me something for the work and the risk (maybe idk). Thanks :)
https://www.paypal.me/Imadalek
Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
(Thanks to @nytebird for the contribution)

If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B
You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)

MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
May 2018 Android patches

https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
https://www.androidfilehost.com/?fid=746163614322268729

Guide how to revive your op6:
First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.

Now you have to go in Windows test mode to not let him install default drivers, so:
windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.

Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (
)
Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
Now you should see qualcomm drivers under port (COM).

You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.

EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)

Please, consider to donate me something for the work and the risk (maybe idk). Thanks :)
https://www.paypal.me/Imadalek
Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
(Thanks to @nytebird for the contribution)

If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B
didint work please help
 

Rusland2021

New member
Jan 12, 2021
4
0
изображение_2021-02-17_182037.png
 

Cgarcia81

Member
Mar 6, 2021
5
0
I want to do this to my Oneplus 7pro but i have a mac is it possible to do this and if so can someone explain how.
 

Rardje99

New member
Mar 9, 2021
1
0
Screen stays black after a completed download. Does someone know what to do about that?
 
Last edited:

f00ngck

New member
Nov 11, 2011
4
0
Screen stays black after a completed download. Does someone know what to do about that?
Same here after a complete download (tried many times with various OOS) sometimes it stays black, sometimes it's stuck at OP logo & sometimes qualcomm crash dump never once reach OP loading screen. Can anyone help? OP6
 

baxtex

Senior Member
Oct 16, 2011
1,083
109
I followed the instructions. After hitting start in the tool, my phone LED became green/yellow and the tool says Param preload. After 2000 seconds (33 min) the status is the same...how long should it take?


To anyone having params preload issue, I managed to flash 10.3.8 using this link: Qualcomm drivers 1.0
Using the recommended drivers didn't work for me. Also i am on windows 10 2h20
Thank you, with this driver it finally worked!
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 126
    You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)

    MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
    May 2018 Android patches

    https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
    https://www.androidfilehost.com/?fid=746163614322268729

    Guide how to revive your op6:
    First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
    After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.

    Now you have to go in Windows test mode to not let him install default drivers, so:
    windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
    Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.

    Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (https://www.youtube.com/watch?v=PpLvmID1wdI)
    Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
    Now you should see qualcomm drivers under port (COM).

    You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
    You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
    And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.

    EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)

    Please, consider to donate me something for the work and the risk (maybe idk). Thanks :)
    https://www.paypal.me/Imadalek
    Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
    Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
    Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
    (Thanks to @nytebird for the contribution)

    If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
    https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B
    4
    OnePlus6_MSMDownloadTool_v4.0_International_9.0.2_enchilada_22_O.27_181025
    https://mega.nz/#!r3A3RKoB!Wuo2tw3ehnnKhcGQEc5fMXPNZdqJO_IT5suVrCHD1UY
    3
    Exactly, this tool put the phone as a brand new. It's super useful and it was an exclusive of L2 Oneplus' techs. Now you can use it whenever you want with no limits :) I shared with you the tool for this purpose.
    Mind to donate, also a little; I'm studying and I'm investing in courses for tech, blockchain and cryptovalues.
    Thank you and I hope you can solve your issues everytime you want :)
    3
    link please. OP still has 5.1.5.

    https://www.androidfilehost.com/?w=files&flid=271466

    Download the OOS 5.1.11 enchilada_22_O.15_180810_unlocked.7z and extract it, everything is in the zip.
    3
    I am trying this method but after the download is complete, the device won't boot up on its own. I have to try multiple times for hours sometimes out of the blue it vibrate and boots up but again going to Crash dump mode.

    Once its started I am trying to flash it again but same thing happening over.

    Can any one help please :(
    Relax. I hope you can fix it now.

    1. Download this https://androidfilehost.com/?fid=17248734326145733775
    2. Download this https://androidfilehost.com/?fid=24052804347798730 (this if the driver is not working for you https://onepluscommunityserver.com/list/Unbrick_Tools/Qualcomm drivers.7z)
    3. Upzip from 1. and 2. to seperate folder
    4. Install the driver from 2.
    5. Reboot PC
    6. Shut down your OnePlus 6
    7. Press and hold Volume Up on you Phone and plug in USB to you PC, release volume up button after 5 sec.
    8. Run msm tool *.exe from 1. with administration priv.
    9. You'll see Com X connected. If not, uninstall the driver, reboot and install driver again. and start with 6.
    10. Hit "Start" in the tool and wait for finish ~230 sec..
    11. your phone will boot auto. right after finisch (green).
    12. you are done and your OP6 is hopefully alive.