[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)

Search This thread

Mord0rr

Senior Member
May 24, 2013
1,058
154
Hi.
I just made a hard reset factory, and partitions became ok. Than root and Magisk.
Except Magisk lost test...everything is ok.
 

wyt18

Senior Member
I am trying this method but after the download is complete, the device won't boot up on its own. I have to try multiple times for hours sometimes out of the blue it vibrate and boots up but again going to Crash dump mode.

Once its started I am trying to flash it again but same thing happening over.

Can any one help please :(
I have the same problem as you. Msm seems to work fine, but phone will not boot up, just shows crashdump mode. Could it be because we upgraded to android 11 and there is no msm for that version?

Did you find a solution for your issue?
 
  • Like
Reactions: hardythaker

hardythaker

Senior Member
Dec 14, 2014
173
24
27
Mumbai
OnePlus 6
I have the same issue....did you resolve this?
Cant acess internal storage, and ADB or bootloader is dead....

Edit* Solved
Unfortunately, No! I've gave up on that actually. Not trying anymore. But one thing I have noticed that if you use OOS 5.* image, it works but 1 out of 10 times. I was able to turn on the phone and it worked for I think 2-3 days (didn't do anything, it was just idle) and again went to Crash Dump mode.
 

Mord0rr

Senior Member
May 24, 2013
1,058
154

sk005

New member
Apr 15, 2022
2
0
You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)

MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
May 2018 Android patches

https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
https://www.androidfilehost.com/?fid=746163614322268729

Guide how to revive your op6:
First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.

Now you have to go in Windows test mode to not let him install default drivers, so:
windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.

Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (
)
Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
Now you should see qualcomm drivers under port (COM).

You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.

EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)

Please, consider to donate me something for the work and the risk (maybe idk). Thanks :)
https://www.paypal.me/Imadalek
Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
(Thanks to @nytebird for the contribution)

If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B

Followed the instruction, and successfully downloaded the files to OP6 but the phone stuck in Black screen with white notification light on after the OS booting page.

I am quite unclear on this EDIT. Could anybody will be able to help on this. I am into this loop.!!

"EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)"
 

balawisss

New member
May 13, 2022
2
0
hi good day everyone i just finish doing everything following everystep even with the youtube video but my phone did not restart after download complete its just show a white led notiication and every time i try to turn it off it just restart itself and stuck on a white led notification can someone please hellp me

thanks in advance
 

balawisss

New member
May 13, 2022
2
0
Followed the instruction, and successfully downloaded the files to OP6 but the phone stuck in Black screen with white notification light on after the OS booting page.

I am quite unclear on this EDIT. Could anybody will be able to help on this. I am into this loop.!!

"EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)"
hi im having the same issue like yours did you found a way to fix it?
 

sk005

New member
Apr 15, 2022
2
0
hi im having the same issue like yours did you found a way to fix it?
Hi there,
I have drained the battery completely and tried the same steps after few hours of charging. No luck there still. But, after a day of keeping it idle, it started booting and UI was accessible. I mean the issue resolved for me.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 126
    You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)

    MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
    May 2018 Android patches

    https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
    https://www.androidfilehost.com/?fid=746163614322268729

    Guide how to revive your op6:
    First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
    After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.

    Now you have to go in Windows test mode to not let him install default drivers, so:
    windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
    Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.

    Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (https://www.youtube.com/watch?v=PpLvmID1wdI)
    Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
    Now you should see qualcomm drivers under port (COM).

    You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
    You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
    And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.

    EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)

    Please, consider to donate me something for the work and the risk (maybe idk). Thanks :)
    https://www.paypal.me/Imadalek
    Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
    Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
    Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
    (Thanks to @nytebird for the contribution)

    If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
    https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B
    4
    OnePlus6_MSMDownloadTool_v4.0_International_9.0.2_enchilada_22_O.27_181025
    https://mega.nz/#!r3A3RKoB!Wuo2tw3ehnnKhcGQEc5fMXPNZdqJO_IT5suVrCHD1UY
    3
    Exactly, this tool put the phone as a brand new. It's super useful and it was an exclusive of L2 Oneplus' techs. Now you can use it whenever you want with no limits :) I shared with you the tool for this purpose.
    Mind to donate, also a little; I'm studying and I'm investing in courses for tech, blockchain and cryptovalues.
    Thank you and I hope you can solve your issues everytime you want :)
    3
    link please. OP still has 5.1.5.

    https://www.androidfilehost.com/?w=files&flid=271466

    Download the OOS 5.1.11 enchilada_22_O.15_180810_unlocked.7z and extract it, everything is in the zip.
    3
    I am trying this method but after the download is complete, the device won't boot up on its own. I have to try multiple times for hours sometimes out of the blue it vibrate and boots up but again going to Crash dump mode.

    Once its started I am trying to flash it again but same thing happening over.

    Can any one help please :(
    Relax. I hope you can fix it now.

    1. Download this https://androidfilehost.com/?fid=17248734326145733775
    2. Download this https://androidfilehost.com/?fid=24052804347798730 (this if the driver is not working for you https://onepluscommunityserver.com/list/Unbrick_Tools/Qualcomm drivers.7z)
    3. Upzip from 1. and 2. to seperate folder
    4. Install the driver from 2.
    5. Reboot PC
    6. Shut down your OnePlus 6
    7. Press and hold Volume Up on you Phone and plug in USB to you PC, release volume up button after 5 sec.
    8. Run msm tool *.exe from 1. with administration priv.
    9. You'll see Com X connected. If not, uninstall the driver, reboot and install driver again. and start with 6.
    10. Hit "Start" in the tool and wait for finish ~230 sec..
    11. your phone will boot auto. right after finisch (green).
    12. you are done and your OP6 is hopefully alive.