[TOOL] [UPDATE 04/09/2015] Flashtool version 0.9.19.10 - Windows / Linux / Mac

[munjeni]

Some people are noticing on the Xperia 1 II that immediately after flashing with this setup the phone shows up with 128GB of storage instead of 256GB (I did not notice this, but apparently it can be fixed with Xperia Companion repair). We also notice that the flashing process goes remarkably quickly. Would any of the FlashTool developers be able to look at these issues to see what is going on and if it is a problem?

Thanks

You need to chose right sin for Repartition:0 , e.g. partition-image-LUN0_124936192_X-FLASH-ALL-2389.sin is for 128 gb or partition-image-LUN0_249896960_X-FLASH-ALL-2389.sin for 256 gb. If you flashed partition-image-LUN0_249896960_X-FLASH-ALL-2389.sin and you have 128 gb instead of 256 gb its in most case sony bug.

 

[brocnical]

You need to chose right sin for Repartition:0 , e.g. partition-image-LUN0_124936192_X-FLASH-ALL-2389.sin is for 128 gb or partition-image-LUN0_249896960_X-FLASH-ALL-2389.sin for 256 gb. If you flashed partition-image-LUN0_249896960_X-FLASH-ALL-2389.sin and you have 128 gb instead of 256 gb its in most case sony bug.

Yes, well the .fsc file I generated has:

Repartition:0:partition-image-LUN0_249896960_X-FLASH-ALL-2389.sin

so it is correctly saying to use a 256 GB partition then. Then there must be a bug somewhere else.

 

[munjeni]

Yes, well the .fsc file I generated has:

Repartition:0:partition-image-LUN0_249896960_X-FLASH-ALL-2389.sin

so it is correctly saying to use a 256 GB partition then. Then there must be a bug somewhere else.

You didn't had bug? If no than I'm believing those users who reported bug have flashed 128 version on their 256 device. One thing about 58.0.fsc , I think better idea is having two, one for 128 device and one for 256 device e.g. 58.0.256.fsc & 58.0.128.fsc , I didn't analysed flashtool and can't say if flashtool have implemented autodetection for right partition image and also can't say what will happen if somebody flash their 128 device with 256 partition0, will it brick their device?

 

[brocnical]

You didn't had bug? If no than I'm believing those users who reported bug have flashed 128 version on their 256 device. One thing about 58.0.fsc , I think better idea is having two, one for 128 device and one for 256 device e.g. 58.0.256.fsc & 58.0.128.fsc , I didn't analysed flashtool and can't say if flashtool have implemented autodetection for right partition image and also can't say what will happen if somebody flash their 128 device with 256 partition0, will it brick their device?

No, I didn't have the bug, though I never checked the storage at first. My phone did crash on first boot but after hat it has been running fine without a software repair. When I checked it has the 256Gb storage as expected.

The .fsc and .properties I posted will work only for the XQ-AT51 which is 256GB storage only. Users with the other variants should create their own .fsc and .properties.

 

[brocnical]

I note that the Torrent links for FlashTool at flashtool.net are showing only for version 0.9.26.0 instead of the latest 0.9.28.0. The links for the uploaded.to download for Linux are also broken. Please could you fix.

 

[avetny]

Please, is there the possibility to see the support also for the XQ-AT52 version? thank you

YAAAAS :angel: please

 

[Raskaipika]

Hi mates:

I've downgrade my cousin's SONY XPERIA X (F5121) to Android 6.0.1 Marshmallow from 8.0.0 Oreo to be able to make a backup of the TA partition, but I've a few questions:

I used to the process, a German customized version because is the only one that I've found to this purpose, but We're from Spain, is there any problem with this? I don't know if in these countrys, the frequencies used for 2G/3G/4G are the same or are different, because after the downgrade, the coverage is worse than before using the Oreo stock rom.

Other question, when I used the program, at the WIPE section, I didin't select the PERSIST and NOQ(I don't remember well the name of thist last option), the "problems" with the coverage can be related with this??

Thank you so much for your time and help, regards.

 

[levone1]

The flash script very likely was created from the USB log of a 128 GB Xperia 1 II device. Doing a factory reset through the phone after it was flashed with FlashTool should fix that (at least that's how it works on the older Xperia X, where the dual SIM variant has 64 GB of storage compared to the 32 GB of the single SIM variant)...

This is not the case. I created the USB log and flash script myself on a 256 GB Xperia 1 II XQ-AT51. I did not notice the issue myself though.

Quick question - how to generate a fsc? I read from someone on another forum who has Xperia 10 (I3113), and can't use FT, because no fsc for his model...
Thanks

 

[brocnical]

Quick question - how to generate a fsc? I read from someone on another forum who has Xperia 10 (I3113), and can't use FT, because no fsc for his model...
Thanks

http://www.flashtool.net/fsccreate.php

 

[cd993]

Does anyone know of a successful way to update to the latest firmware (I'm using an Xperia 1 II) that is bootloader unlocked & rooted.

Research seems to suggest delete all .TA files aswell as the userdata file and if that works, to flash an extracted/pactched boot.img that I've already prepped. Though some users mention that they then get a decryption error resulting in the need to fully wipe.

If I have to do a clean flash it wouldn't be the end of the world but I would love to avoid the hassle of (even with the usage of Swift Backup etc) and little things like not losing my autobrightness settings which have been learning my usage etc

 

[Forbiddendnb]

i cant flash lates firmware for my Xperia 5 (J9210)
Flashtool Latest release (0.9.29.0)

01/003/2020 11:03:35 - INFO - Selected Bundle for Sony Xperia 5 Dual(J9210). FW release : 55.1.A.9.75. Customization : Customized RU
01/003/2020 11:03:35 - INFO - Preparing files for flashing
01/004/2020 11:04:27 - INFO - Please connect your device into flashmode.
01/004/2020 11:04:35 - INFO - Using Gordon gate drivers version 3.1.0.0
01/004/2020 11:04:35 - INFO - USB buffer size set to 512K
01/004/2020 11:04:35 - INFO - Opening device for R/W
01/004/2020 11:04:35 - INFO - Device ready for R/W.
01/004/2020 11:04:35 - INFO - Reading device information
01/004/2020 11:04:35 - INFO - Reading phone properties
01/004/2020 11:04:35 - INFO - Sending getvarroduct
01/004/2020 11:04:35 - INFO - getvar status : OKAY
01/004/2020 11:04:35 - INFO - Sending Read-TA:2:2202
01/004/2020 11:04:35 - INFO - Read-TA status : OKAY
01/004/2020 11:04:35 - INFO - Sending Read-TA:2:2205
01/004/2020 11:04:35 - INFO - Read-TA status : OKAY
01/004/2020 11:04:35 - INFO - Sending Read-TA:2:2210
01/004/2020 11:04:35 - INFO - Read-TA status : OKAY
01/004/2020 11:04:35 - INFO - Sending Read-TA:2:4900
01/004/2020 11:04:35 - INFO - Read-TA status : OKAY
01/004/2020 11:04:35 - INFO - Sending Read-TA:2:10021
01/004/2020 11:04:35 - INFO - Read-TA status : FAIL
01/004/2020 11:04:35 - WARN - Unit 10021 does not exist ( Hex unit value 00002725 )
01/004/2020 11:04:35 - INFO - Connected device : J9210 / SW release 1318-9850_55.1.A.3.112 / Customization 1320-0801_R8B
01/004/2020 11:04:35 - INFO - Last flash date : null
01/004/2020 11:04:35 - INFO - Phone ready for flashmode operations.
01/004/2020 11:04:35 - INFO - Start Flashing
01/004/2020 11:04:35 - INFO - Parsing boot delivery
01/004/2020 11:04:35 - ERROR - null
01/004/2020 11:04:35 - INFO - Sending Sync
01/004/2020 11:04:35 - INFO - Sync status : OKAY
01/004/2020 11:04:35 - INFO - Sending powerdown
01/004/2020 11:04:35 - INFO - powerdown status : OKAY
01/004/2020 11:04:38 - INFO - Device disconnected
01/004/2020 11:04:39 - INFO - Device connected in flash mode
01/004/2020 11:04:52 - INFO - Device disconnected

Who can help me ?

 

[munjeni]

Bootloader NOT need to be unlocked!

 

[dummytest97]

is the this the right place to report error? i have phone Sony SOV36 and wanted to flash because password forgot but flashtool showing error and phone still normally on. Anyone can help me? 1 more i saw at flashtool log say current device is G8341 , i think maybe seller flash with G8341 firmware.
@Androxyde

 

[TripodKnight]

Xperia 5 ii Support?

http://www.flashtool.net/fsccreate.php

Hi, thanks for this tool. I am a new Sony xperia 5 ii owner and noticed xperia 1 ii support was recently added.

Are there plans to add Xperia 5 ii support? I'd create the fsc file per these instructions but my Xperia 5 ii will not repair using the xperia companion app. It's not bricked (Still loads android, only camera and call sound don't work) but I can't for the life of me fix it. Newflasher will not succeed when trying to flash the newest XperiFirm rom.

So I ask, is anyone able to add Xperia 5 ii XQ-AS52 support?

 

[killa92]

Hi, Does anybody have files to support G82XX? I can't seem to download individual files from github and when i download all device data firefox thinks there's a virus for some reason

Ok, So i took the time out to carry out repair function in companion whilst logging USB, I come to parse USB log with correct decrypted location and correct .tms. It has been parsing for over 30 minutes, not yet saw a sign of success. My .tms file is about 1.62GB, Is this a normal size? Having a very tough time with this device, reluctantly tried newflash which doesnt support so happy to come back to flashtool however it seems I am not getting any luck with parse function?

 

[mharckk]

hi been trying to update my xperia 1ii XQ-AT52 to android 11
but got null error

tried other ftf TW & SEA for Android 11
and HK ftf for Android 10

still got same error "null"
tried changing cables and ports still no luck.

 

[StephanKliem]

hi been trying to update my xperia 1ii XQ-AT52 to android 11
but got null error

tried other ftf TW & SEA for Android 11
and HK ftf for Android 10

still got same error "null"
tried changing cables and ports still no luck.

View attachment 5170419

Try it out with the Sony UCB32 USB Cable.
It worked for me with the cable.

 

[Son-Y]

Hi.

50.2.fsc is missing for Sony Xperia XA2 H3113

Did a downgrade on my Xperia XA2 (H3113) to Oreo using Flash Tool. Worked fine!
Now I need to upgrade again. Want to flash most recent version (50.2.A.3.77-R1B). Downloaded Firmware with Xperifirm. Created a Bundle. But when flashing Flash Tool says:

No partition delivery included.
Maybe a bundle created with a previous release of Flashtool.
Do you want to continue ?

So I choose to continue … but it still exits with an error:

 (...)
INFO  - Start Flashing
INFO  - Parsing boot delivery
INFO  - Found a boot delivery
ERROR - No flash script found. Flash script is mandatory
INFO  - Sending Sync
INFO  -    Sync status : OKAY
INFO  - Sending powerdown
INFO  -    powerdown status : OKAY
INFO  - Device connected with USB debugging off

… if I am right, this means that Flash Tool is missing the right .fsc file.

> Looking up in the folder: ~/.flashTool/H3113/ ... there is only 50.1.fsc.

> Updating via "Devices > Devices Sync > Manual Sync" did not bring up any further .fsc file.

> Looking at github: https://github.com/Androxyde/devices I could not find the right .fsc either.

50.2.fsc is missing for Sony Xperia XA2 H3113

Can somebody supply such a file?

Would be great!
Thanks in advance...

 

[canford]

Hope someone could help us out please, I have been trying to flash a Sony Xperia L4 for a few days now, as I have locked myself out and cannot remember the Gmail account linked to the phone, I have managed to get into Android recovery and wiped/ installed but when it starts back up its still asking for the Gmail to get it going again. I keep getting to the same point on the Flashtool but it won't load up any files as shown in the image, I have downloaded a few different firmware using Xperifirm but still the same problem, any ideas where i have gone, wrong guys?

 

[sidneylopsides]

It's possible the L4 is tied to the Google account and resetting won't solve it. I have an old Z3+ that's locked out because of a forgotten account.