I am not responsible for any damages that happen by using this guide to you or your mobile or your pc. this guide is only meant for samsung s dous gt-s7562 which might had been bricked and have no other option to get it back, can try this guide to bring it back to life or return to a factory default state completely, yet there is no guarantee that it will work with every device. don't blame me.
These files here are to be used with care and only on Samsung Galaxy S Dous GT-S7562.
Information about what we are going to do here
basically these files will flash, re-partition and write data to your device the way it was shipped to you. so whatever changes you have made to the device system, boot or recovery will be replaced to default sorting out any bugs within the different partitions.
you may hesitate to flash this firmware rather than your country firmware, but the first thing we should do here is make your phone start working again. after that you can flash to your baseband. the files are all here on xda. and you can always find a way around.
Requirements
1. A bricked gt-s7562 where you can only have access to the download mode by pressing Down+Power button+Home button if its hard brick where you can't even reach download mode and recovery and looks like its dead, check thread
post #4
2. Working Data cable
3. PC with windows
4. Make sure your recovery is dead have you been pressing all the up down home and power button and releasing after seeing the samsung screen?
Instructions. (follow it or stay dead)
1. Download the zip file
S7562DXBMD1_S7562OLBBMD1_S7562XXBMD2_Android_4.0.4_4 and save it on your pc.
2. Extract the files using any winzip, winrar, 7zip
3. Open odin3 v3.07.exe
4. Browse
PIT and navigate to the downloaded folder to find the file
"signed_kyle_v2_0604.pit"
5. Browse
Bootloader and open file
BOOTLOADER_S7562XXBMD2_1216076_REV02_user_low_ship.tar.md5
6. Browse
PDA and open file
CODE_S7562XXBMD2_1216076_REV02_user_low_ship.tar.md5
7. Browse
Phone and open file
MODEM_S7562DXBMD1_1216076_REV02_user_low_ship.tar.md5
8. Browse
CSC and Open file
CSC_OLB_S7562OLBBMD1_1216076_REV02_user_low_ship.tar.md5
9. Check that
auto reboot,
re-partition and
f-reset time are ticked. (see screenshot to cross check.)
10. You sure? then start the process and wait for it to complete.