I never used adb when permanent rooting my mt4g thanks to root explorer it's possible.
Sent from my LG-P999 using xda premium
TRUE PermaRoot and the ULTIMATE S=Off!!! Check this out even if you're rooted!!!
- Thread starter grankin01
- Start date
I never used adb when permanent rooting my mt4g thanks to root explorer it's possible.
Sent from my LG-P999 using xda premium
Ok, 2 questions that I have atm.
Does it matter what version of VISIONary I have?
I'm having trouble reading the command, what part am I suppose to copy to ONLY turn S=off? I don't need the other things, so that's the reason if you're wondering why I only want S=off
Does it matter what version of VISIONary I have?
I'm having trouble reading the command, what part am I suppose to copy to ONLY turn S=off? I don't need the other things, so that's the reason if you're wondering why I only want S=off
warranty
I have a question. I realized that there were dust under my screen, so I wanted to send in the phone for repair. I flashed the engineer bootloader using this method and if I turn my s=on back using this method, will my warranty be void? If there anything else I need to do before shipping back to htc for replacement?
I have a question. I realized that there were dust under my screen, so I wanted to send in the phone for repair. I flashed the engineer bootloader using this method and if I turn my s=on back using this method, will my warranty be void? If there anything else I need to do before shipping back to htc for replacement?
help help
hi
I did everthing as described
and I suceeded
but I wanted engeering bootloader and since the linke for that file was blocked in my country I downloaded it through mobile. when I worte every thing in terminal emulator I didn't saw the numbers suppose to appear
so I restarted the phone to see if I had engeenering bootloader. but the phone stopped and never responde it DIED
I am not blaming any body but what happened
and is there anything I can do
please help
hi
I did everthing as described
and I suceeded
but I wanted engeering bootloader and since the linke for that file was blocked in my country I downloaded it through mobile. when I worte every thing in terminal emulator I didn't saw the numbers suppose to appear
so I restarted the phone to see if I had engeenering bootloader. but the phone stopped and never responde it DIED
I am not blaming any body but what happened
and is there anything I can do
please help
If you already got s off then you should be able to push the rest through adb.
Sent from my HTC Glacier using XDA App
how to do that
thank U for responding
yes I can see my phone in my device manager
can you please tell me how to do that
thank U for responding
yes I can see my phone in my device manager
can you please tell me how to do that
i need help. i got s-off and the eng bootloader, but when i try to perm root with visionary, nothing happens. i can just keep hitting the perm root button and nothin. im using r14
I had to Google it when I did this a long while back, I don't have the link anymore and I'm mobile, at work. Sorry man, but good luck.
1 question:
I only want Sim unlock. I can do it via gfree. So here is what I am thinking.
First gain temp root with visionary and then push gfree (Follow 9 steps as per guide.) Any idea if ./gfree -f is required? Because I only want sim unlock(without root / s-off), I want to run ./gfree -S directly. Is this possible?
I am currently on 2.3.4 stock image. I will have to downgrade to 2.2 and follow the guide. But will I be able to again update to 2.3.4? Will lose the sim unlock?
THANKS IN ADV
I only want Sim unlock. I can do it via gfree. So here is what I am thinking.
First gain temp root with visionary and then push gfree (Follow 9 steps as per guide.) Any idea if ./gfree -f is required? Because I only want sim unlock(without root / s-off), I want to run ./gfree -S directly. Is this possible?
I am currently on 2.3.4 stock image. I will have to downgrade to 2.2 and follow the guide. But will I be able to again update to 2.3.4? Will lose the sim unlock?
THANKS IN ADV
i already rooted my phone back in feb,with s-off an engineering h-boot. if i runs this ,will it mess up my phone. im not sure if i have full s-off or not
Visionary +
So I originally rooted my 1st phone back around april. I had get a new one because my screen broke. And now I'm trying to root the new one and for some reason visionary doesn't want to work. It will sit on the rooting device, please wait screen forever and not move. I have tried restarting my phone several times and nothing. Any Ideas?
So I originally rooted my 1st phone back around april. I had get a new one because my screen broke. And now I'm trying to root the new one and for some reason visionary doesn't want to work. It will sit on the rooting device, please wait screen forever and not move. I have tried restarting my phone several times and nothing. Any Ideas?
I don't think visionary works on 2.3.4. I just got a replacement this week so I had to follow the tutorial on how to downgrade to 2.2.1 then root. There's a downgrade guide for the mt4g in the g2 forums, follow that guide & you'll be good to go. I'd post the link but I'm using xda app.
Sent from my HTC Glacier using XDA App
Visionary r14 hangs on the black screen for awhile. I downgraded to 2.2. I have tried r13, r11 both not even getting to temp root. Should I re -"update" and see what happens? The chip is good.
Reupdate the rom? Or visionary? On 2.2 when i ran visionary for temproot i did get a black screen for a minute or so, then it came back saying visionary is working them i followed the commands, so I'd say give it some time.
Sent from my HTC Glacier using XDA App
none of the one click methods allow me to temp root, my phone has the SEM chip. I either get denied root or the app hangs. IS there any way to root without using a one click root? any help?
Last edited:
The sem is the good chip right? Why dont you try Grankin guide in the dev section that says "True permroot..."
Sent from my Glacier using XDA App broke pocket version
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
93Ok guys, first of all Scotty2 gets all the credit for the program R&D. I used my device as a test bed and have tried a couple different kernels (Gr8Gorilla's O/C Kernel and the stock kernel).
Now for the boring stuff ...
This is a very invasive way of rooting your device but the benefit is TRUE S=Off and root privileges throughout the system. As such, you do this at your own risk and if you brick your device neither Scotty2 nor myself are responsible, YOU ARE!!! Do this at your own risk!!!
This is not for the faint of heart and if you have any reservations about doing things like this do not do it.
This process will do three things for your device. I will explain them here:
1. It will set up Super CID on your device allowing you to flash any carriers rom (not just tmobile). Giving you more freedom with your choice of software. The software still needs to be device specific to the glacier for compatability reasons though. Like vodafone glacier roms etc.
2. It will subsidy unlock your device. In other words, it will SIMUNLOCK your phone allowing you to use an AT&T sim card and so on in your device without needing the unlock code from HTC.
3. Most important of all it will turn the RADIO S=Off. This is the ultimate S=Off because the radio is what controls the security flag in the first place. Once you turn it off here it is off everywhere and will allow you pure unadulterated access to your device.
This process will not change your bootloader (unless your on 0.86.0000 and you follow the optional steps).
Now, you may be asking "Why do this? I already have root from your other guide and it has given me r/w access to system and recovery. I thought this meant we had permanent S=Off." This is only partially true. We have had an engineering bootloader and "Label" s=off not radio s=off. When you turn the security off in radio it is off permanently no matter what hboot you have installed engineering or otherwise. However, it is optional but you can still copy the engineering hboot over and it will allow you to flash whatever you like without (as much) fear of bricking your device.
This guide assumes you know how to use ADB. If you do not there are guides all over XDA to show you how. There is even a really good one in this forum. Also here is a video on how to setup adb discovered by topgun303: http://www.youtube.com/watch?v=1UF5w1dKe2U
*NOTE*
For some reason this process can bork your recovery. If you notice after following the steps below that in order to reboot from recovery you have to uninstall/reinstall the battery and hit the power button, just install/reinstall clockwork recovery through Rom Manager in the android market and it will fix your problem.
CONFIRMED: Guide does work for pre-OTA devices!!! Thanks xanz!
Here we go:
If you are already permarooted per the other guide just follow the first 11 steps.
Make sure you have visionary installed on your device. (If you were already permarooted w/s=off ignore this step.)
Download this file:
http://www.mediafire.com/?s7afymwe2wb3x60 New version of gfree with more options! See below.
md5sum: b73c56ca0e21664c5756d4ad295063c5
1. Now unzip the file into your SDK tools directory.
2. Plug your device into your computer.
3. Now open explorer and hold down shift at same time you right mouse click on your SDK tools directory (platform-tools if you have the R8 version of the SDK). Select open command window here. If you are in linux (ubuntu) right mouse click on your SDK tools folder, choose actions, and choose open command window(or whatever it's called). Otherwise, open a command prompt and cd your way to your SDK tools directory.
4. Type "adb push gfree /data/local" and hit enter.
Optionally, you could dl the file to your phone use androzip or something like it to unzip the file and then use root explorer to move the file named gfree to /data/local. Not the gfree.h file. All the other files are source code inlcuded for the gnu license. This would skip the first 4 steps.
5. Now unplug your device from the computer.
6. Run visionary to gain temp root. (If you were already permarooted w/s=off ignore this step.)
7. Open terminal emulator on your device, type "su", and hit enter to gain root privileges.
8. Type "cd /data/local" and hit enter.
9. Now type "chmod 777 gfree" and hit enter to make the program executable.
10. Type "./gfree -f" and hit enter.
New features in gfree.
gfree usage:
gfree [-h|-?|--help] [-v|--version] [-s|--secu_flag on|off]
-h | -? | --help: display this message
-v | --version: display program version
-s | --secu_flag on|off: turn secu_flag on or off
-c | --cid <CID>: set the CID to the 8-char long CID
-S | --sim_unlock: remove the SIMLOCK
With the new features you can turn off one thing at a time. You can also turn security back on and set the CID back to stock if you wish. To turn simlock back on you still have to follow the revert procedures on this page as the information that is patched to turn the lock off is encrypted and we can't write back to it other than restoring the entire image.
So, if you wanted to leave simlock on but turn security off and set super CID the command would be "./gfree --secu_flag off --cid 11111111" + enter. The -f switch after ./gfree that is now in the above step (./gfree -f) just tells gfree to patch everything.
11. Wait for the program to finish and then reboot into HBoot to see if S=Off. Also, check your bootloader version. If it says s=off and has bootloader version 0.86.0000 it worked.
If you already had hboot 0.85.2007 you can check it through the hboot menu. It gives you an option for "system info" in the hboot menu. Highlight it and hit power. It should say CID = 11111111 or something like that. If it does your golden.
Congratulations!
12. If this is the first time you have rooted your device you will need to run visionary again (temproot w/set system r/w after root checked and then attempt permroot) to make root privileges permanent and then reboot again. Now "su" should work properly for you.
Gfree writes a backup of the file that it patches named Part7backup-numbers.bin on your sdcard. I suggest putting this file in a safe place as it is the only way to revert if you need to.
[Optional] Steps to flash engineering bootloader.
1. Restart your phone and plug it back into your computer.
2. Download this file: http://www.megaupload.com/?d=NN5726Z8
md5sum: df4fd77f44993eb05a4732210d2eddc6
3. Copy the file to your SDK tools directory.
4. Open a command prompt again and cd into your SDK tools directoty (platform-tools if your on the new R8 SDK).
5. Type "adb push hboot_dhd.nb0 /data/local" and hit enter.
6. Now open terminal on your device and type "su" and enter to gain root priviliges.
7. Type "cd /data/local" and enter.
8. Now type "dd if=hboot_dhd.nb0 of=/dev/block/mmcblk0p18" and hit enter.
9. You should see something like: 2048 bytes in 2048 bytes out 1048576 bytes copied blah blah blah.
10. Now restart the device into hboot and check if your bootloader version is 0.85.2007. That is what you want to see.
Congratulations, you now have a TRUE root and engineering bootloader on your shiny MT4G!!!
Procedure to revert
1. Rename the part7backup file that you already have to something just so you know that it is the original backup.
2. Open up terminal emulator or adb shell and type "su" + enter to get root privileges.
3. Type "cd /data/local" and hit enter.
4. Now type "./gfree -f" + enter to run gfree again. It will disable wp on the emmc and remove the brq filter in the kernel. (as well as make another backup, which you can delete if you wish)
5. Now run the "dd if=/where/your/part7backup-numbers.bin of=/dev/block/mmcblk0p7" and it should show the output:
xxxx bytes in
xxxxbytes out
xxxxxxxxxx copied in blah blah blah
6. Run "sync" and then reboot. (I didn't do this and it worked fine but it won't hurt either.)
If you have the engineering hboot 0.85.2007 installed you will still be showing s=off when you do the above revert steps. Follow these steps to reflash the stock hboot and turn s=on:
Download this file and unzip it to /sdcard on your device.
unroot.rar
http://www.mediafire.com/?12oi5elu7v2y8og
md5sum: aad4e64126cf8d92d7e8b5abb48fdadd
Terminal Emulator Method
1. Open up terminal editor on your device.(I prefer this method b/c you can see the output.)
a. Type "su" + enter to gain root privileges.
b. Type "cd /sdcard/unroot" + enter.
c. Type "sh unroot.sh" + enter.
d. Follow the onscreen prompts.
File Explorer Method
2. Open root explorer, sufbs, or some other file browser with root access.
a. Navigate to /sdcard/unroot.
b. Click on unroot.sh and allow it to run. Some file browsers ask permission before they execute scripts.
c. Wait 18 to 20 seconds and reboot your phone into the bootloader to check if S=on.
You now have S=ON again.
Here is a pic of the stock HBoot 0.86.0000 with S=Off to prove it.2
Yes, download a rooted stock froyo ROM, then try it
If I helped, give thanks, if you please.
........Death before dishonor........2
Go with engineering boot instead, you can fully modify your phone, with custom splash screens. An having the engineering boot, there less likely of a change of you flashing something that requires eng an possibly messing up the phone.
From my fist to your face, enjoy.2
Here's the engineering HBoot for ya.
http://wiki.cyanogenmod.com/wiki/HTC_Glacier:_Support_Downloads2
Yes, that is correct.
Yes you can root this way and I'm not sure if there is a video on it.
New posts
-
[ROM][11][RMX2020] Evolution X 5.5.2 [UNOFFICIAL] [27.03.2021]- Latest: Faizan Ali Ehsan Ali
-
-
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone