¿Podrías explicarme cómo hiciste la instalación después de root?
¿Podrías explicarme cómo hiciste la instalación después de root?
Could you explain to me how you did the installation after root?
yes i am the creator of this from and sometimes your data partition doesn't like the changes done by our zip and for the best possible experience I would request you to clean flash the buildMy question is for the @madadictromtester, youre part of their team? just to know, my question isnt about clean flashing, thats is obvious that avoid issues, my focus is to keep my data and my configs tks
cant we fix unlock bootloader and phone is not running in official firmware on snapdragon variant. can you add these feature too cause this warning really annoying![]()
TURBO-UI Rom is a project based on my past projects like ProjectX Rom as well as CleanOS. This is a oneui based rom which focuses on providing the out of the box experience along with better performance and lighter build that from stock rom. All the features have tested by many of my users and are working fine. Although the rom was tested for significant time before launch still it can have bugs. If you face so please let us know on our telegram Page.
We focus on providing features which are not avaliable by default in the device along with blazing fast performance. Our main motive is maintain maximum stability. It is a collaborative efforts of 4 team members and under guidance of recognized developers.
Please Note
* Your warranty is now void ( anyway it got void when you unlocked your bootloader)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* Some Bugs might happen because of stock firmware so don't blame me for them. Report them to me I will see if it is possible to fix them from my side
* you point the finger at me for messing up your device, I will laugh at you. Do it at your own Risk
Requirements
Instruction to Flash
- Unlocked Bootloader
- Custom Recovery
- Stock Firmware
1. Format Data is a must for best performance
2. Flashing it over clean install is advised
3.Install Zip through custom recovery like twrp
Features
- Debloated Oneui Based Rom
- Build Prop Tweaks
- Multiuser
- Call Delay Fix
- Disable Error Checking
- Increase Jpg quality to 100%
- Disable Knox
- wireless display fix
- Rmm Fix
- Faster Boot
- Disabled Built In Error Reporting
- Time Duration for Wifi Scanning tweaked
- 3D Render Optimizations
- Launcher in Memory
- Save Battery Without Performance Drop
- Better Signal
- Adb Fix
- Improve Audio and Video
- Better Call Voice Quality
- Game Settings
- Emperor Settings
- Dalvik Virtual Machine Tweaks
- Better Scrolling
- Allow Purge of Assets To Free Ram
- Boot and Shutdown Animation Boost
- CSC Mods
- Volte, Screenshot and many icons in Quick Settings
- Mobile Data Toggle in Power Off Menu
- Voice Recording Activated ( It doesnt work in Wifi Calls and that is set by Samsung)
- 4g icon in status bar replaced with LTE
- Knox gaurd disabled
- Real Time Network speed in status bar
- Camera Shutter Sound Button
- WIFI calling active
- Camera Features
- Fun Mode Added
- Dual Recording
- Auto Focus enabled in all video modes
- Floating Feature Tweaks
- Google Feed Added
- Super Fast Charging option
- Samsung Marketing Disabled
- AOD Transition
- Rom Mods
- Secure Folder fix
- Theme Trial patched
- Screenshot enabled in Secure Apps
- Quick Reply in lockscreen
- QS tils number changer
- Rom info in about settings
- Adaptive Brightness boosted
- Outdoor Mode
- Different charging animation
- Different Charging indicator
- Slightly dpi tweaks
- Smooth app switch (ui based)
- Screen Resolution Toggle(WQHD+ mode is there but wont work in this device
- Custom Boot Animation
- Magisk and Modules Included
- Magisk V25.2 ( credits @topjohnwu)
- Knox Patch Enhancer, added with the lsposed app ( credits @BlackMesa123)
- Shamiko ( credits github link)
- Universal GMS Doze ( credits @gloeyisk)
- Universal Safetnynet Mod ( credits @kdrag0n)
- Lsposed framework (credirs github-link)(can be accessed through notification bar notification)(if not working properly reflasht the module)
- Adaptive Refresh Rate ( big thanks to @sujayc27)
- AppLock ( if crashing flash this addon zip in twrp link)
- Custom Fingerprint Animation(Exynos as of now)
- Task Bar Enabled ( Buggy)(can be only used with gesture navigation right now)(can be switched off from display settings)[/SPOILER]
Developers
Credits
- @madadictromtester ( Creator and Exy Developer)
- @3mel ( Snap 5G Developer)
- @xxTurborocketxx (Snap 4G Developer)
Contact US
- @sujayc27 (For his amazing mods and guidance)
- @ricci206 (For his mods)
- @Rick_BR ( NO Boot Unlock Warning)
- @sevsman (for his expert guidance)
- All my donators
- @gallgamer ( For his tweaks)
- @ZonalRipper ( For his amazing script)
Email ([email protected])
Telegram Link
Downloads
Download Link
Kernel Source:- We are using Stock kernel as it is
Flashing it over clean install is advised?? how to do it??![]()
TURBO-UI Rom is a project based on my past projects like ProjectX Rom as well as CleanOS. This is a oneui based rom which focuses on providing the out of the box experience along with better performance and lighter build that from stock rom. All the features have tested by many of my users and are working fine. Although the rom was tested for significant time before launch still it can have bugs. If you face so please let us know on our telegram Page.
We focus on providing features which are not avaliable by default in the device along with blazing fast performance. Our main motive is maintain maximum stability. It is a collaborative efforts of 4 team members and under guidance of recognized developers.
Please Note
* Your warranty is now void ( anyway it got void when you unlocked your bootloader)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* Some Bugs might happen because of stock firmware so don't blame me for them. Report them to me I will see if it is possible to fix them from my side
* you point the finger at me for messing up your device, I will laugh at you. Do it at your own Risk
Requirements
Instruction to Flash
- Unlocked Bootloader
- Custom Recovery
- Stock Firmware
1. Format Data is a must for best performance
2. Flashing it over clean install is advised
3.Install Zip through custom recovery like twrp
Features
- Debloated Oneui Based Rom
- Build Prop Tweaks
- Multiuser
- Call Delay Fix
- Disable Error Checking
- Increase Jpg quality to 100%
- Disable Knox
- wireless display fix
- Rmm Fix
- Faster Boot
- Disabled Built In Error Reporting
- Time Duration for Wifi Scanning tweaked
- 3D Render Optimizations
- Launcher in Memory
- Save Battery Without Performance Drop
- Better Signal
- Adb Fix
- Improve Audio and Video
- Better Call Voice Quality
- Game Settings
- Emperor Settings
- Dalvik Virtual Machine Tweaks
- Better Scrolling
- Allow Purge of Assets To Free Ram
- Boot and Shutdown Animation Boost
- CSC Mods
- Volte, Screenshot and many icons in Quick Settings
- Mobile Data Toggle in Power Off Menu
- Voice Recording Activated ( It doesnt work in Wifi Calls and that is set by Samsung)
- 4g icon in status bar replaced with LTE
- Knox gaurd disabled
- Real Time Network speed in status bar
- Camera Shutter Sound Button
- WIFI calling active
- Camera Features
- Fun Mode Added
- Dual Recording
- Auto Focus enabled in all video modes
- Floating Feature Tweaks
- Google Feed Added
- Super Fast Charging option
- Samsung Marketing Disabled
- AOD Transition
- Rom Mods
- Secure Folder fix
- Theme Trial patched
- Screenshot enabled in Secure Apps
- Quick Reply in lockscreen
- QS tils number changer
- Rom info in about settings
- Adaptive Brightness boosted
- Outdoor Mode
- Different charging animation
- Different Charging indicator
- Slightly dpi tweaks
- Smooth app switch (ui based)
- Screen Resolution Toggle(WQHD+ mode is there but wont work in this device
- Custom Boot Animation
- Magisk and Modules Included
- Magisk V25.2 ( credits @topjohnwu)
- Knox Patch Enhancer, added with the lsposed app ( credits @BlackMesa123)
- Shamiko ( credits github link)
- Universal GMS Doze ( credits @gloeyisk)
- Universal Safetnynet Mod ( credits @kdrag0n)
- Lsposed framework (credirs github-link)(can be accessed through notification bar notification)(if not working properly reflasht the module)
- Adaptive Refresh Rate ( big thanks to @sujayc27)
- AppLock ( if crashing flash this addon zip in twrp link)
- Custom Fingerprint Animation(Exynos as of now)
- Task Bar Enabled ( Buggy)(can be only used with gesture navigation right now)(can be switched off from display settings)[/SPOILER]
Developers
Credits
- @madadictromtester ( Creator and Exy Developer)
- @3mel ( Snap 5G Developer)
- @xxTurborocketxx (Snap 4G Developer)
Contact US
- @sujayc27 (For his amazing mods and guidance)
- @ricci206 (For his mods)
- @Rick_BR ( NO Boot Unlock Warning)
- @sevsman (for his expert guidance)
- All my donators
- @gallgamer ( For his tweaks)
- @ZonalRipper ( For his amazing script)
Email ([email protected])
Telegram Link
Downloads
Download Link
Kernel Source:- We are using Stock kernel as it is
Can you help me? Whenever I try to install the ROM through TWRP, at the end I get an error saying that it was not possible to mount the vendor and the product![]()
TURBO-UI Rom is a project based on my past projects like ProjectX Rom as well as CleanOS. This is a oneui based rom which focuses on providing the out of the box experience along with better performance and lighter build that from stock rom. All the features have tested by many of my users and are working fine. Although the rom was tested for significant time before launch still it can have bugs. If you face so please let us know on our telegram Page.
We focus on providing features which are not avaliable by default in the device along with blazing fast performance. Our main motive is maintain maximum stability. It is a collaborative efforts of 4 team members and under guidance of recognized developers.
Please Note
* Your warranty is now void ( anyway it got void when you unlocked your bootloader)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* Some Bugs might happen because of stock firmware so don't blame me for them. Report them to me I will see if it is possible to fix them from my side
* you point the finger at me for messing up your device, I will laugh at you. Do it at your own Risk
Requirements
Instruction to Flash
- Unlocked Bootloader
- Custom Recovery
- Stock Firmware
1. Format Data is a must for best performance
2. Flashing it over clean install is advised
3.Install Zip through custom recovery like twrp
Features
- Debloated Oneui Based Rom
- Build Prop Tweaks
- Multiuser
- Call Delay Fix
- Disable Error Checking
- Increase Jpg quality to 100%
- Disable Knox
- wireless display fix
- Rmm Fix
- Faster Boot
- Disabled Built In Error Reporting
- Time Duration for Wifi Scanning tweaked
- 3D Render Optimizations
- Launcher in Memory
- Save Battery Without Performance Drop
- Better Signal
- Adb Fix
- Improve Audio and Video
- Better Call Voice Quality
- Game Settings
- Emperor Settings
- Dalvik Virtual Machine Tweaks
- Better Scrolling
- Allow Purge of Assets To Free Ram
- Boot and Shutdown Animation Boost
- CSC Mods
- Volte, Screenshot and many icons in Quick Settings
- Mobile Data Toggle in Power Off Menu
- Voice Recording Activated ( It doesnt work in Wifi Calls and that is set by Samsung)
- 4g icon in status bar replaced with LTE
- Knox gaurd disabled
- Real Time Network speed in status bar
- Camera Shutter Sound Button
- WIFI calling active
- Camera Features
- Fun Mode Added
- Dual Recording
- Auto Focus enabled in all video modes
- Floating Feature Tweaks
- Google Feed Added
- Super Fast Charging option
- Samsung Marketing Disabled
- AOD Transition
- Rom Mods
- Secure Folder fix
- Theme Trial patched
- Screenshot enabled in Secure Apps
- Quick Reply in lockscreen
- QS tils number changer
- Rom info in about settings
- Adaptive Brightness boosted
- Outdoor Mode
- Different charging animation
- Different Charging indicator
- Slightly dpi tweaks
- Smooth app switch (ui based)
- Screen Resolution Toggle(WQHD+ mode is there but wont work in this device
- Custom Boot Animation
- Magisk and Modules Included
- Magisk V25.2 ( credits @topjohnwu)
- Knox Patch Enhancer, added with the lsposed app ( credits @BlackMesa123)
- Shamiko ( credits github link)
- Universal GMS Doze ( credits @gloeyisk)
- Universal Safetnynet Mod ( credits @kdrag0n)
- Lsposed framework (credirs github-link)(can be accessed through notification bar notification)(if not working properly reflasht the module)
- Adaptive Refresh Rate ( big thanks to @sujayc27)
- AppLock ( if crashing flash this addon zip in twrp link)
- Custom Fingerprint Animation(Exynos as of now)
- Task Bar Enabled ( Buggy)(can be only used with gesture navigation right now)(can be switched off from display settings)[/SPOILER]
Developers
Credits
- @madadictromtester ( Creator and Exy Developer)
- @3mel ( Snap 5G Developer)
- @xxTurborocketxx (Snap 4G Developer)
Contact US
- @sujayc27 (For his amazing mods and guidance)
- @ricci206 (For his mods)
- @Rick_BR ( NO Boot Unlock Warning)
- @sevsman (for his expert guidance)
- All my donators
- @gallgamer ( For his tweaks)
- @ZonalRipper ( For his amazing script)
Email ([email protected])
Telegram Link
Downloads
Download Link
Kernel Source:- We are using Stock kernel as it is
disable universal GMS doze module, it's is there to save battery life but a consequence is delayed notifications.Hi, I have a problems with notifications. It doesn't work, despite the permissions granted.
no, SPay and SPass will never work after flashing non official images (like twrp). unless the devs working on the Knox Patcher module make breakthrough it'll never work again for any of us.
there's no way to do this, on snapdragon Samsung phones that warning screen is handled by the bootloader which can't be edited without it stopping the rom from loading at all.cant we fix unlock bootloader and phone is not running in official firmware on snapdragon variant. can you add these feature too cause this warning really annoying
it's related to the install procedure. follow this guideCan you help me? Whenever I try to install the ROM through TWRP, at the end I get an error saying that it was not possible to mount the vendor and the product![]()
That means I'm stuck. I have a us snapdragon s20 fe (smg781u1) on Android 11 still (unlocked bootloader and root). If I upgrade to the latest firmware, I lose my unlock foreverit's related to the install procedure. follow this guide
:::best practice flashing instructions:::
first update OneUI to the same monthly update as the ProjectX / TurboUI version.
having partitions from mixed firmware can work OK but the chances of errors or performance reduction is increased.
• backup your apps, messages and media with Swift Backup, make sure the folder is on your memory card and not internal storage, or copy it to PC
• download ProjectX with your PC, not your phone.
• boot into twrp and format data. this is something to get used to as the normal flashing procedure for any rom.
• after the format use twrp's reboot option to reboot to recovery. this might sound pointless but it isn't. twrp can't access your partitions correctly again until it's rebooted.
• wipe cache and dalvik/art
• copy the zip to your phone and click install... complete the install options and enjoy!!
ask Afaneh92 if his friends have made a bitsafe OneUI 5.1 build. others have gotten them (for older OneUI 4 builds) but I don't know where they're shared.That means I'm stuck. I have a us snapdragon s20 fe (smg781u1) on Android 11 still (unlocked bootloader and root). If I upgrade to the latest firmware, I lose my unlock forever
I'll ask on telegramask Afaneh92 if his friends have made a bitsafe OneUI 5.1 build. others have gotten them (for older OneUI 4 builds) but I don't know where they're shared.
Afaneh92 made a one UI 5.1 build for us s20 Fe's.ask Afaneh92 if his friends have made a bitsafe OneUI 5.1 build. others have gotten them (for older OneUI 4 builds) but I don't know where they're shared.
If SPay is important to you just remain on stock OS.Does this rom works on Samsung s20 FE exynos version 4G edition?
Another question is I had s9Plus before and after rooting spay never worked on it so is that still the same for this phone?
it's the continuation of ProjectX under a different name.
we did add few features different from ProjectX