• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[TUT] How to get Aircrack working with Alpha awus036h Wifi Card Tf300t!

Search This thread

SpyFi

Senior Member
Jun 6, 2011
174
48
Video: http://www.youtube.com/watch?v=gvUE7lP5WME&sns=em

Okay everyone! Here is a tutorial on how to get Aircrack tools working with your Android TF300T! This gets your Alpha Card working with all the drivers in android so you can use it in Backtrack!

CREDITS: I do not take credit for the drivers I simply put all the information together.

Requirements :

Rooted Device
4 GB Free Space
USB Port or for a Phone an Adapter that can provide power like a HUB
An Alpha awus036h wifi adapter
Android 4.0 or higher that supports USB Host Mode
A brain!! :yeye:

Required Downloads:

Backtrack 5 installer APP - IN Files.zip
RootFileExplorer - IN Files.zip
Required Drivers
Terminal App - IN Files.zip
Android VNC - IN Fiiles.zip
Modules App - IN Files.zip

Required Files.zip - https://www.asuswebstorage.com/navigate/share/GY4I6766V4

First install all apps.

Follow the guide in Backtrack 5 installer APP to set up your BT5 install.

Next boot up backtrack and compile and install Aircrack!

In a backtrack terminal issue the following commands to install Aircrack:

http://pastebin.com/tPM8Qshp

Once complete stay in the terminal and get wicd manager

apt-get install wicd

Now that is done download the Alpha drivers and extract them to your system
/lib/modules folder.

Drivers: https://www.asuswebstorage.com/navigate/share/GY4JP966V4

Next TURN OFF YOUR WIFI

The drivers conflict with the internal wifi. You need to reboot to gain your normal wifi again!

Open the Modules app and open the system tab and select the 3 drives your extracted and save them!

eeprom_93cx6.ko, mac80211.ko, rtl8187.ko

Make sure to go to the settings in the Modules App and un-check load at boot!

Now connect your Alpha Wifi card and open up your backtrack terminal and type:

/etc/init.d/dbus start; /etc/init.d/wicd start

Then Type

ifconfig wlan0 up

Put your card in monitor mode: airmon-ng start wlan0

Thats it! :thumbsup:

Just start using aircrack or download reaver and your set!

If you want to use reaver just download it in your bt5: http://code.google.com/p/reaver-wps/downloads/list

Here is a good reaver tut: http://www.hackforums.net/showthread.php?tid=2079678

I know this is a fairly basic tutorial but I am a very busy guy these days!! I hope you get this working!
 
Last edited:

xplained

Senior Member
Sep 26, 2010
188
4
Singapore
Hey i got an error while entering sh backtrack.sh command. It says,
backtrack.sh[6]: cut: not found
this script requires root! Type:su.

I followed the instructions perfectly. any help?
 

SpyFi

Senior Member
Jun 6, 2011
174
48
Hey i got an error while entering sh backtrack.sh command. It says,
backtrack.sh[6]: cut: not found
this script requires root! Type:su.

I followed the instructions perfectly. any help?

Its really straight forward. Just follow the onscreen instructions as best as possible. Make sure you downloaded the script during the instructions. Also make sure the files are all extracted to a folder on your sdcard named backtrack
 

swest6602

Senior Member
Dec 18, 2009
108
37
Central MA
Hey i got an error while entering sh backtrack.sh command. It says,
backtrack.sh[6]: cut: not found
this script requires root! Type:su.

I followed the instructions perfectly. any help?

I apologize if this is obvious and you have already done this, but, Try Typing: su (Enter) at the start of your terminal session to enter superuser mode.
 

afzalarsalan

Senior Member
Apr 12, 2011
282
59
Guys ive got a question. What does aircrack do anyway?

It is a command line tool which lets you *cough* *cough* test the security of your own or other people's networks. ;) Basically if aircrack is able to discover the password on your network in a relatively short amount of time (a couple of hours) you or whoever's network it is needs to boost their security.
 
Last edited:

shrumhead

Member
Jul 22, 2010
34
2

Spark1223

Senior Member
Sep 24, 2011
321
46
You should be able to use this method to install drivers from other wireless cards... HOWEVER, you need to go to backtrack's website (google it), and check the wiki to make sure your wireless card is capable of "injection"

http://www.backtrack-linux.org/wiki/index.php/Wireless_Drivers

I'm pretty sure mine is. Has the following chipset, discovered when I use a pc with backtrack: ASUSTek Computer, Inc. RT2573 - using the mac80211 rt2500usb/rt73usb drivers

Its one of the ones listed. Don't I need to compile the .ko modules for ARM? If so, how do I do this and where do I find them?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    Video: http://www.youtube.com/watch?v=gvUE7lP5WME&sns=em

    Okay everyone! Here is a tutorial on how to get Aircrack tools working with your Android TF300T! This gets your Alpha Card working with all the drivers in android so you can use it in Backtrack!

    CREDITS: I do not take credit for the drivers I simply put all the information together.

    Requirements :

    Rooted Device
    4 GB Free Space
    USB Port or for a Phone an Adapter that can provide power like a HUB
    An Alpha awus036h wifi adapter
    Android 4.0 or higher that supports USB Host Mode
    A brain!! :yeye:

    Required Downloads:

    Backtrack 5 installer APP - IN Files.zip
    RootFileExplorer - IN Files.zip
    Required Drivers
    Terminal App - IN Files.zip
    Android VNC - IN Fiiles.zip
    Modules App - IN Files.zip

    Required Files.zip - https://www.asuswebstorage.com/navigate/share/GY4I6766V4

    First install all apps.

    Follow the guide in Backtrack 5 installer APP to set up your BT5 install.

    Next boot up backtrack and compile and install Aircrack!

    In a backtrack terminal issue the following commands to install Aircrack:

    http://pastebin.com/tPM8Qshp

    Once complete stay in the terminal and get wicd manager

    apt-get install wicd

    Now that is done download the Alpha drivers and extract them to your system
    /lib/modules folder.

    Drivers: https://www.asuswebstorage.com/navigate/share/GY4JP966V4

    Next TURN OFF YOUR WIFI

    The drivers conflict with the internal wifi. You need to reboot to gain your normal wifi again!

    Open the Modules app and open the system tab and select the 3 drives your extracted and save them!

    eeprom_93cx6.ko, mac80211.ko, rtl8187.ko

    Make sure to go to the settings in the Modules App and un-check load at boot!

    Now connect your Alpha Wifi card and open up your backtrack terminal and type:

    /etc/init.d/dbus start; /etc/init.d/wicd start

    Then Type

    ifconfig wlan0 up

    Put your card in monitor mode: airmon-ng start wlan0

    Thats it! :thumbsup:

    Just start using aircrack or download reaver and your set!

    If you want to use reaver just download it in your bt5: http://code.google.com/p/reaver-wps/downloads/list

    Here is a good reaver tut: http://www.hackforums.net/showthread.php?tid=2079678

    I know this is a fairly basic tutorial but I am a very busy guy these days!! I hope you get this working!
    2
    This is absolutely fantastic, will try this later on during the day. Thank You! :)

    Thanks! Enjoy, this is a great reason to own a tabet.
    1
    If anyone is interested I have compiled kernel and modules with rt3070 and rt73 support for Nexus 7

    Enviado desde mi Nexus 7 usando Tapatalk HD