[TUTORIAL] Flash BIN rom, Unbrick, Update - Optimus 3d (Service Flash software)

[marti701]

UWAGA!!!!! Przed przystąpieniem do instalacji, należy odinstalować z komputera wszystkie programy i sterowniki LG. Program działa stabilnie, tylko pod WindowsXP

1. Pobierz i zainstaluj http://csmg.lgmobile.com:9002/data/Setup_LGFlashTool_1.1.zip
2. Pobierz https://rapidshare.com/files/2393374474/file.zip , rozpakuj i wrzuć plik "LGFlashTool.exe" do C:\LG\LGFlashTool\
3. Pobierz i zainstaluj http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/AVIVML/20110623_05/OMAPFlashInstaller-4.10(2).zip
4. Pobierz i rozpakuj http://csmg.lgmobile.com:9002/data/LGUnitedModemDriver_WHQL_ML_Ver_4.9.7_All_Win7_LGEAll.zip
a. zainstaluj "LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe"
b. zainstaluj "LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe"
5. Wyłącz telefon, wyjmij karte SIM i SD
a. wciśnij w telefonie vol up i trzymaj
b. Trzymając cały czas vol up podłącz USB
c. Komputer wykryje nowy sprzęt "omap4430"
d. Puść vol up
6. Instalacje sterowników należy wykonać, jak na poniższych fotkach

a.


b.



c.


d.


e.


f.


g.



7.Po zainstalowaniu sterowników musimy wejść w menagera urządzeń i zmienić port "LGE CDMA USB SERIAL PORT" na com41. Instrukcja na poniższych fotkach.
a.



b.Tu na fotce jest błąd, tak jak pisałem wyżej port zmieniacie dla LGE CDMA USB SERIAL PORT


c.


d.


8. Uruchamiamy LGFlashTool, Pojawi się okno:



9. W okienku DLL wskazujemy lokalizacje pliku "LGP920_110622.dll" http://csmg.lgmobile.com:9002/swdat...3/[LGFlashtoolV1.0]LGP920_110622_Download.zip
10.W okienku S/W wskazujemy lokalizacje romu ( UWAGA!!! wskazujemy tylko plik z rozszerzeniem .bin)
Rom BIN_LGP920AT-00-V10b-EUR-XXX-JUN-16-2011
Hotfile.com: Hébergement de fichiers par un clic: BIN_LGP920AT-00-V10b-EUR-XXX-JUN-16-2011+0.zip
11.Zaznaczamy USB i klikamy ok.
12.Klikamy na port setting (ikonka wtyczki com)
13.Zaznaczamy jak na poniższej fotce:
a.






14.Klikamy start (W okienku Port 1 powinien pojawić się napis READY)




15. odłaczamy telefon od USB na ok 5 sekund
16. Wciskamy i trzymamy vol up, podlaczamy USB
17. Proces aktualizacji rozpocznie sie automatycznie, gdy to nastapi możemy puścić vol up.
18. Gdy pasek postępu dojdzie do 100%, należy uruchomić telefon przyciskiem POWER.

UWAGA!!! Gdyby proces aktualizacji zatrzymał sie na dłuzej (ok 5 minut) należy, nie odłaczać telefonu od USB, wcisnąć i trzymać vol up + power, do momentu kontynuacji aktualizacji.




WSZYSTKIE DOSTĘPNE ROMY "Thanx to "nasirahmed"
LINK


ERRATA

Aby wgrywanie romu programem LGFLASHTOOL przebiegło bez błędów, należy posiadać odpowiedni kabel USB.
Pomiędzy 4, a 5 pin USB Micro-B należy wlutować rezystor 910Kohm.





Proces aktualizacji wykonuje sie tak samo jak w pierwszym poście. Jedyna różnica to punkt 5a,b ; 16 PODCZAS PODŁACZNIA KABLA USB NIE WCISKAMY ŻADNEGO PRZYCISKU!!!!!!



Podczas aktualizacji na telefonie powinien pojawić sie ekran:



Osoby którym telefon zablokowal się na ekranie:




Po wykonaniu wgrywania romu, nastąpi restart telefonu. Ponownie pojawi sie w/w ekran aktualizacji (kabel usb musi być cały czas podlączony do komputera i telefonu, a LGFLASH TOOL uruchomiony)
Należy czekać, aż pojawi sie w telefonie info o błędzie aktualizacji OTA. Telefon się ponownie zrestartuje i nastapi jego uruchomienie.
Testowane na moim O3D

 

[adixtra]

IN ENGLISH

Read the update at the bottom
(18 SEPTEMBER 2011)

NOTE !!!!!

Before installation, uninstall all LG's programs and drivers from your computer.

Tested on Windows XP.​

Download all these files.

All in one link (THx for The Dark Lestat) :http://p92x.acidhazardrom.com/ccount/click.php?id=21

or

http://csmg.lgmobile.com:9002/data/Setup_LGFlashTool_1.1.zip
https://rapidshare.com/files/2393374474/file.zip
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/AVIVML/20110623_05/OMAPFlashInstaller-4.10(2).zip
http://csmg.lgmobile.com:9002/data/LGUnitedModemDriver_WHQL_ML_Ver_4.9.7_All_Win7_LGEAll.zip
LGFLASHTool 1.2 http://forum.xda-developers.com/showpost.php?p=19094799&postcount=107

Thread with Optimus 3d Roms in *.bin format. http://forum.xda-developers.com/showthread.php?t=1246678Thanks to nasirahmed

1.Extract "Setup_LGFlashTool_1.1.zip" and Install.

2.Extract "file.zip" and put "LGFlashTool.exe" to location where you installed "Setup_LGFlashTool_1.1.zip" (default: C:\LG\LGFlashTool\)

3.Extract and Install "OMAPFlashInstaller-4.10(2).zip"

4.Exract "LGUnitedModemDriver_WHQL_ML_Ver_4.9.7_All_Win7_LGEAll.zip" and Install "LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe " and "LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe "

5.Turn Off phone, Remove your phone's SIM and SD cards.

6.Press and hold voll up button in phone.

7.When u holding "voll up button" connect the USB cable.

8.When computer detects the new hardware (Omap4430) release "voll up button".

9.Driver Installation:

a.

b.

c.

d.

e.

f.

g.

10.After Driver installation, go to device manager and change the port "LGE CDMA USB SERIAL PORT" to "com41".

a.

b.As I wrote above, you must change the port for "LGE CDMA USB SERIAL PORT" not for "LGE Mobile USB serial port" as pictured.


c.

d.

11.Run LGFlashTool.



12.In DLL select file for p920 or p920h ( from here http://forum.xda-developers.com/showthread.php?t=1246678"

13.In S/W select only *.bin file from downloaded rom.

14. Choice (Check) "USB" and click OK.

15. Click on Port COM settings(COM plug icon)

16.Check as on photos.

a.

b.

17. Click start(The Port 1 window should appear READY).



18. Disconnects USB cable and wait 5 seconds.

19. Press and hold voll up button in phone and connect USB cable.

20. The update process will begin automatically after that release the "vol up".

21.When the progress bar reaches 100%, Power ON the phone.

WARNING!!!

If the update process has stopped for a longer time (about 5 minutes) not disconnect the phone from USB, , press and hold Vol Up + Power and wait when update process resume.

You do this on your own risk!​

Jeśli widzicie błędy, piszcie.




UPDATE 18 SEPTEMBER 2011​

To flashing rom with LGFLASHTOOL without errors you need right USB cable.
Between 4 and 5 pin you have to solder resistor 910 Kohm.





The update process is the same ,but u don't need press any button when connect USB cable to phone.

Phone screen during update


This fix update screen isue



After flashing the phone will restart.

Update screen appears again(don't disconnect usb cable from phone and don't close LGDLASHTOOL)
Please wait until you see the info about error of OTA update.
After that the phone rebots and power On automaticaly.


Thanx to Marti701

 

[marti701]

All Posts Have to Be in English if you do not use English Use Google to Translate

 

[m33ts4k0z]

Thanks, does this fix the update screen issue?

I would try it myself but my phone is already on service for this reason.

 

[nico101]

Yes it should fix udpate screen issue as CWM loop and other situations when rom doesn't boot.

 

[isaias19]

thanks. im on the process now, 22%

 

[adixtra]

Write, when u finish. Everything going well??

 

[isaias19]

well, flashed and it was successfull, but still my problems occurs still my batterry is 0% . =C

 

[jhonnyjhonny]

well, flashed and it was successfull, but still my problems occurs still my batterry is 0% . =C

Has anything changed?

I have the same problem, I will try and see if it works for me! Thanks!

 

[P_U_A_John]

The procedure offers more than the flash KDZ​​?

Should be checked two questions:
Those who have the battery problem is still there?
Those who are stuck on the screen update is released with this solution?

Otherwise, I think this thread should be in developement.

 

[gpx]

Ηι,

Im stuck on lg update screen and I will try this method since KDZ method failed.
I will try it tomorrow since i dont have xp mashine now. I will report tomorrow

 

[m33ts4k0z]

Ηι,

Im stuck on lg update screen and I will try this method since KDZ method failed.
I will try it tomorrow since i dont have xp mashine now. I will report tomorrow

Eagerly awaiting! Thanks!

 

[hefonthefjords]

Smooshy images.

Sent from my LG-P920 using XDA Premium App

 

[dnardz]

Same problem for me...battery is not charging after flashing using this method.

 

[marti701]

Same problem for me...battery is not charging after flashing using this method.

Before flashing battery charging ?

 

[gpx]

As I sais previously Im stuck on the following screen as shows below:
http://forum.xda-developers.com/showthread.php?t=1186460&page=2

Tried this tool on xp mashine but it didnt work
at the begining everything goes ok, flashes 100% but after some time I get the following message?

Error WM_Progress_MSG
download fail
Check AT Command
Retry Check AT Command 1
Retry Check AT Command 2
Error
Check AT_Command Fail
Fail
Error WM_Progress_MSG
download fail
Error

When I power on the device it gives me the same screen as above
any suggestions?

 

[dnardz]

before flashing I was having battery not charging problem like some users of O3d here...I thought it would fix this problem but it did not..thanks for sharing your flashing method anyway.

 

[adixtra]

As I sais previously Im stuck on the following screen as shows below:
http://forum.xda-developers.com/showthread.php?t=1186460&page=2

Tried this tool on xp mashine but it didnt work
at the begining everything goes ok, flashes 100% but after some time I get the following message?

Error WM_Progress_MSG
download fail
Check AT Command
Retry Check AT Command 1
Retry Check AT Command 2
Error
Check AT_Command Fail
Fail
Error WM_Progress_MSG
download fail
Error

When I power on the device it gives me the same screen as above
any suggestions?

Maybe try wipe??

 

[gpx]

how I try wipe ? stuck on lg update screen

 

[adixtra]

I read http://forum.xda-developers.com/show...1186460&page=2 and you can not go into recovery by pressing vol down + power. I didn't know another method