• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[TUTORIAL][GUIDE] How to install Supercharger V6

Will you use it ?

  • Yes

    Votes: 177 87.2%
  • No

    Votes: 26 12.8%

  • Total voters
    203
Search This thread

Rox

Senior Member
Nov 11, 2012
4,330
11,506
Mostar
This script will make your phone faster and smoother, i tested it and it worked for me on my Ace 2
This fixes bad memory management on our JB


Full totorial is HERE, it is little messy so i made this for some less experienced users.

All credits goes to Zeppelinrox

Requirements:

1. Rooted Device with custom ROM (Italian Job or Kyrillos for Ace 2)

2. Script manager (You can also use terminal emulator or ADB shell)

3. Busybox over 1.16.2 (included in Italian Job and Kyrillos)

Installation:

1. Download latest script from this page

Note: To download script : Right Click ---> Save as

2. Transfer it to your /sdcard (or anywhere else)

3. There are 3 ways to open script :

a) Using Script Manager
Open Script manager and locate script, press it and give root acces ( su icon , turns green when you press it ) and press run

b) Using Terminal Emulator
To run this script in terminal emulator you have to write following lines
Code:
su
sh /sdcard/V6*

c) Via ADB
In cosole write :
Code:
adb shell
su
sh /sdcard/V6*

Note: if you put script in other folder you need to write it etc. if you have folder named supercharger on internal memoy and you put script there you have to write:
Code:
su
sh /sdcard/supercharger/V6*


4. Than all you need to do is follow instructions when you run script, everything is fully explained.

5. Reboot when you finish

At this point skip to step 9. if you are running GB!

Continue for JB


When you finish this all you will not be able to supercharge 100% because we need to mod services.jar file.
Here is what to do next:



6. Download Ultimatic Jar Patcher from THIS thread (Ultimatic_Jar_Patcher_Tools_RC6_ALL_DEX_ALL_OSes_NO_FLASH.zip)

7. Turn on USB debugging ( Developer options > under Debugging check USB debugging ) and Run Supercharger V6 on your phone

8. Connect phone to PC and run Ultimatic Jar Patcher ( Extract attached file and run ultimatic_run_patcher_adb.bat) and follow instruction. Again is everything fully eyplained when you run it.

9. Run SuperClean and Reboot.

10. Using script manager navigate to /data/99supercharger.sh and select "run as root" ( su icon ) , and "Start on boot"

Note: To test if script runs after reboot open supercharger v6 script and see info under the menu

11. YOU HAVE SUPERCHARGED ANDROID DEVICE! Now it depends on you what settings will you use. Hope i helped ;)

If you have any problems ask here or contact me via pm.

My settings ( They are shown when you run script ) :

Code:
================================================
  Prior Scrolling Speed has been applied - 0
================================================
  Kernel & Virtual Memory Tweaks are Rock Hard!
================================================
  Miscellaneous and SD Card Speed Tweaks - YES!
================================================
  3G TurboCharger Enhancement(3GTC Addon)- YES!
================================================
  Engine Flush-O-Matic - Enabled @ Every - 2hrs
================================================
  Fix Alignment (Dual Tool) Runs On Boot - NO!
================================================
  Fix Emissions (Fixes FCs) Runs On Boot - YES!
================================================
  Wheel Alignment(ZipAlign) Runs On Boot - YES!
================================================
  Detailing(Clean Database) Runs Every 5 Boots!
================================================
.
.
.

================================================

Launcher is DIE-HARD! ie. SUPERCHARGED!  25%

================================================
   SuperCharger ADJ Entries ARE Patched In! 50%
================================================

   OOM Grouping Fixes ARE In Effect!        75%
   That means the boot script ran!

================================================

   Current Values MATCH Prior SuperCharge! 100%

.
.
.

================================================
   Current Minfrees = 8,16,180,200,220,255 MB
  Prior V6 Minfrees = 8,16,180,200,220,255 MB
================================================

   You have 624 MB of RAM on your device...
         ...768 HP settings are recommended!

.
.
.
================================================
       SuperCharger Service is Installed!
================================================
  BullerProof Apps Service is Installed!
================================================
 /init.d/97BulletProof_Apps is NOT Running!
================================================
       Engine Flush-O-Matic is ON & NOT in RAM!
================================================
        Nitro Lag Nullifier is Installed!
================================================

.
.
.

================================================
     SuperCharger Level: 100% SuperCharged!
================================================

Minfree values : 8,16,180,200,220,255 are best so far I discovered.
Really good memory management with them !


P.S.
If you got better performance with other settings share it here !
If this was helpfull press THANKS button ;)
 
Last edited:

mojito0

Senior Member
Aug 14, 2012
574
164
Larisa
Samsung Galaxy S21 Ultra
Sooo just modified a whole bunch of settings, trying to figure out how this thing works, now I'm searching for the superclean thing xD, well gratz to you mate, the truth is I had tried supercharger in the past on another phone, did some tweaks but the guides wouldn't help (too complicated), this one simples things out for sure.
 
  • Like
Reactions: minimonkey7

Rox

Senior Member
Nov 11, 2012
4,330
11,506
Mostar
Can I use ADB to run the script?

Yes, there is way, i forgot to write it:

Open console and write:
Code:
adb shell
su
sh /sdcard/v6*


hello, do not understand the second part of the instructions. is possible to choose to automatically install the terminal now has 100% of the operation?

Enviado desde mi GT-I8160 usando Tapatalk 2

Do not understand your question.

wich file to download?
rc11 or rc12 test 6?

I would recommend non test verion (RC11) ;)
 
Last edited:
  • Like
Reactions: samer menla

Kilstor

Senior Member
Mar 20, 2013
100
9
Nice guide

Edit: I'm stuck at the samsung texture it is loading or? because i'm waiting now like 7 min.

Edit: Now it's working thanks :D
 
Last edited:

Kilstor

Senior Member
Mar 20, 2013
100
9
@samer menla

Uhm you don't must open it drag it to your sdcard and follow the guide

---------- Post added at 07:21 PM ---------- Previous post was at 06:44 PM ----------

But how to edit the settings which script i must open?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 109
    This script will make your phone faster and smoother, i tested it and it worked for me on my Ace 2
    This fixes bad memory management on our JB


    Full totorial is HERE, it is little messy so i made this for some less experienced users.

    All credits goes to Zeppelinrox

    Requirements:

    1. Rooted Device with custom ROM (Italian Job or Kyrillos for Ace 2)

    2. Script manager (You can also use terminal emulator or ADB shell)

    3. Busybox over 1.16.2 (included in Italian Job and Kyrillos)

    Installation:

    1. Download latest script from this page

    Note: To download script : Right Click ---> Save as

    2. Transfer it to your /sdcard (or anywhere else)

    3. There are 3 ways to open script :

    a) Using Script Manager
    Open Script manager and locate script, press it and give root acces ( su icon , turns green when you press it ) and press run

    b) Using Terminal Emulator
    To run this script in terminal emulator you have to write following lines
    Code:
    su
    sh /sdcard/V6*

    c) Via ADB
    In cosole write :
    Code:
    adb shell
    su
    sh /sdcard/V6*

    Note: if you put script in other folder you need to write it etc. if you have folder named supercharger on internal memoy and you put script there you have to write:
    Code:
    su
    sh /sdcard/supercharger/V6*


    4. Than all you need to do is follow instructions when you run script, everything is fully explained.

    5. Reboot when you finish

    At this point skip to step 9. if you are running GB!

    Continue for JB


    When you finish this all you will not be able to supercharge 100% because we need to mod services.jar file.
    Here is what to do next:



    6. Download Ultimatic Jar Patcher from THIS thread (Ultimatic_Jar_Patcher_Tools_RC6_ALL_DEX_ALL_OSes_NO_FLASH.zip)

    7. Turn on USB debugging ( Developer options > under Debugging check USB debugging ) and Run Supercharger V6 on your phone

    8. Connect phone to PC and run Ultimatic Jar Patcher ( Extract attached file and run ultimatic_run_patcher_adb.bat) and follow instruction. Again is everything fully eyplained when you run it.

    9. Run SuperClean and Reboot.

    10. Using script manager navigate to /data/99supercharger.sh and select "run as root" ( su icon ) , and "Start on boot"

    Note: To test if script runs after reboot open supercharger v6 script and see info under the menu

    11. YOU HAVE SUPERCHARGED ANDROID DEVICE! Now it depends on you what settings will you use. Hope i helped ;)

    If you have any problems ask here or contact me via pm.

    My settings ( They are shown when you run script ) :

    Code:
    ================================================
      Prior Scrolling Speed has been applied - 0
    ================================================
      Kernel & Virtual Memory Tweaks are Rock Hard!
    ================================================
      Miscellaneous and SD Card Speed Tweaks - YES!
    ================================================
      3G TurboCharger Enhancement(3GTC Addon)- YES!
    ================================================
      Engine Flush-O-Matic - Enabled @ Every - 2hrs
    ================================================
      Fix Alignment (Dual Tool) Runs On Boot - NO!
    ================================================
      Fix Emissions (Fixes FCs) Runs On Boot - YES!
    ================================================
      Wheel Alignment(ZipAlign) Runs On Boot - YES!
    ================================================
      Detailing(Clean Database) Runs Every 5 Boots!
    ================================================
    .
    .
    .
    
    ================================================
    
    Launcher is DIE-HARD! ie. SUPERCHARGED!  25%
    
    ================================================
       SuperCharger ADJ Entries ARE Patched In! 50%
    ================================================
    
       OOM Grouping Fixes ARE In Effect!        75%
       That means the boot script ran!
    
    ================================================
    
       Current Values MATCH Prior SuperCharge! 100%
    
    .
    .
    .
    
    ================================================
       Current Minfrees = 8,16,180,200,220,255 MB
      Prior V6 Minfrees = 8,16,180,200,220,255 MB
    ================================================
    
       You have 624 MB of RAM on your device...
             ...768 HP settings are recommended!
    
    .
    .
    .
    ================================================
           SuperCharger Service is Installed!
    ================================================
      BullerProof Apps Service is Installed!
    ================================================
     /init.d/97BulletProof_Apps is NOT Running!
    ================================================
           Engine Flush-O-Matic is ON & NOT in RAM!
    ================================================
            Nitro Lag Nullifier is Installed!
    ================================================
    
    .
    .
    .
    
    ================================================
         SuperCharger Level: 100% SuperCharged!
    ================================================

    Minfree values : 8,16,180,200,220,255 are best so far I discovered.
    Really good memory management with them !


    P.S.
    If you got better performance with other settings share it here !
    If this was helpfull press THANKS button ;)
    3
    Hello!!!

    First of all, I say THANK YOU, THANK YOU to zeppelinrox for this fantastic script! It really doubled my free ram! And THANK YOU to Rox for writing this guide, it helped me a lot!

    Although I've searched the forum and googled a lot to avoid silly and already answered question, I have some questions for which I haven't found an answer yet.

    1) SuperCharger creates a folder named V6_SuperCharger in the root of the sdcard. It contains a data and system folder amongst other files. There is a 99SuperCharger.sh script too. In the internal memory of my phone, where there are core files, there is a data\99SuperCharger.sh file and other important scripts related to SuperCharger too. When we are instructed to set this file as "root" and "run on boot" with Script Manager, you are referring to the one in the internal memory, right? Not the one in the V6_SuperCharger folder of the sdcard? Because I run the script from the internal memory, I think it is right cause the script says I am 100% supercharged...

    2) What is this V6_SuperCharger folder on the sdcard I mentioned? Maybe it contains backup files, or not? Can I move it to another location or delete it?

    3) After patching Services.jar, I found Services.jar file in the root of the sdcard. Again, is this a backup? Or maybe it is the actual patched file? Can I move it to another location? I use to keep backup files in an external hard drive.

    Thanks for your answers!!!

    ---------- Post added at 12:53 AM ---------- Previous post was at 12:45 AM ----------



    Connect your phone with the PC via USB in Charge only mode (I found that MTP works on my device). Enable debug USB option on your phone. Extract the zip in a folder on your PC and run the bat file!

    1. Yes the one under /data
    2
    i don't find this minfree values on my script 8,16,180,200,220,255 :confused:

    you have to enter them manually ;) use option 10 and after that choose NO, and you should got something like : slot 1: , slot : 2 etc.
    2
    You can try but i will not recommend to mix tweaks.

    Sent from my GT-I8160
    2
    Ok sorry.
    How i run supercharge in my phone?
    (I m beginner)

    I have completed to the point 5 with the terminal emulator
    Very much thanks
    Enviado desde mi GT-I8160 usando Tapatalk 2

    continue with steps, everything is explained
    ;)