For the lost souls; here you go!
nvizync (boot.img) & tronoftroy
www.datafilehost.com
nvizync (boot.img) & tronoftroy
Tutorial How to root ZTE z835 (Maven 3) with Magisk.
- Thread starter nvizync
- Start date
do you have the files? requested folder is unavailable. thanksDISCLAIMER: I AM NOT RESPONSIBLE FOR WHAT MAY HAPPEN TO YOUR DEVICE, DO THIS AT YOUR OWN RISK.
Before I start: everything I'm going to post here, I learned from this thread: https://xdaforums.com/maven-3/help/zte-maven-3-z835-root-t3705687/page9
VERSION OF MAGISK FLASHEAD v17.1 (Unfortunately no one has flashed version v18.1)
What we need (they will be in the links at the end):
-ZPST for AT&T (with this program we are going to flash the modified boot.img)
-Drivers: QDLoader, ZTE AndroidUSB and ZTE_V889F (in case the previous Zte driver does not work).
-Modified boot.img that are already flashed with Magisk, only the following versions are available:
-Z835V2.0.0B10
-Z835V2.0.0B12
-Z835V1.0.0B13
-Magisk Manager version compatible with v17.1
EVERYTHING YOU NEED IS IN A LINK AT THE END OF THE POST.
Let's get started.
I recommend to do a hard reset before starting, however, in one of my devices I did it having data and applications installed, if you have used kingroot or any other software in your phone, erase all trace of it so you do not have problems.
We download all the contents of the folder, install all drivers included, and the ZPST for AT&T.
Starting to flash:
WE NEED AT LEAST 50-60% of Battery
Turn off the phone and turn on pressing Vol Down + Power Button, the phone will start in FTM mode.
Open ZPST for AT&T and select version Z835
WARNING, remove the usim and sd card
Once inside the software we proceed to connect the cell phone.
1. You will see if the phone was recognized by the com port.
2. Download, this is where we will enter to download the firmware
3. You will see your information imei and so on.
This is how it will look once connected (Let's go to the download tab)
1. Let's select the firmware (it has to be the same as the cell phone otherwise it can corrupt the imei)
2. We chose where to keep a small log to check if everything went well.
3. HIT THE DOWNLOAD BUTTON!!!!!
WARNING: wait for the device to restart at least 2 or 3 times, one of them will be in FTM mode again, so do not panic, it will take a while in 3% or 5%.
When the phone starts normally, if you did a hard reset configure everything again, otherwise, we will proceed to install the magisk.
DO NOT INSERT THE SD CARD YET!
Magisk asks if I want to update to the latest version, press NO THANKS.
Proceed to uninstall
Now let's install the version of magisk manager we downloaded (com.topjohnwu.magisk_6.1.0-165_minAPI21(nodpi)_apkmirror.com.apk)
When the installation is finished we enter Magisk and this will ask us if we want to upgrade to the latest version, PRESS NO!
Now we will see that magisk is installed correctly.
We see that we can use all its functions.
We will proceed to verify if we have root access.
Download root checker
And Voila!
MEGA link: https://mega.nz/#F!ud8VwKRJ!-cJr7EJyhb1PkziNx5KvLQ
outdated
use this instead https://xdaforums.com/t/bootloader-...vices-devinfo-partition-modification.4100897/
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
5DISCLAIMER: I AM NOT RESPONSIBLE FOR WHAT MAY HAPPEN TO YOUR DEVICE, DO THIS AT YOUR OWN RISK.
Before I start: everything I'm going to post here, I learned from this thread: https://xdaforums.com/maven-3/help/zte-maven-3-z835-root-t3705687/page9
VERSION OF MAGISK FLASHEAD v17.1 (Unfortunately no one has flashed version v18.1)
What we need (they will be in the links at the end):
-ZPST for AT&T (with this program we are going to flash the modified boot.img)
-Drivers: QDLoader, ZTE AndroidUSB and ZTE_V889F (in case the previous Zte driver does not work).
-Modified boot.img that are already flashed with Magisk, only the following versions are available:
-Z835V2.0.0B10
-Z835V2.0.0B12
-Z835V1.0.0B13
-Magisk Manager version compatible with v17.1
EVERYTHING YOU NEED IS IN A LINK AT THE END OF THE POST.
Let's get started.
I recommend to do a hard reset before starting, however, in one of my devices I did it having data and applications installed, if you have used kingroot or any other software in your phone, erase all trace of it so you do not have problems.
We download all the contents of the folder, install all drivers included, and the ZPST for AT&T.
Starting to flash:
WE NEED AT LEAST 50-60% of Battery
Turn off the phone and turn on pressing Vol Down + Power Button, the phone will start in FTM mode.
Open ZPST for AT&T and select version Z835
WARNING, remove the usim and sd card
Once inside the software we proceed to connect the cell phone.
1. You will see if the phone was recognized by the com port.
2. Download, this is where we will enter to download the firmware
3. You will see your information imei and so on.
This is how it will look once connected (Let's go to the download tab)
1. Let's select the firmware (it has to be the same as the cell phone otherwise it can corrupt the imei)
2. We chose where to keep a small log to check if everything went well.
3. HIT THE DOWNLOAD BUTTON!!!!!
WARNING: wait for the device to restart at least 2 or 3 times, one of them will be in FTM mode again, so do not panic, it will take a while in 3% or 5%.
When the phone starts normally, if you did a hard reset configure everything again, otherwise, we will proceed to install the magisk.
DO NOT INSERT THE SD CARD YET!
Magisk asks if I want to update to the latest version, press NO THANKS.
Proceed to uninstall
Now let's install the version of magisk manager we downloaded (com.topjohnwu.magisk_6.1.0-165_minAPI21(nodpi)_apkmirror.com.apk)
When the installation is finished we enter Magisk and this will ask us if we want to upgrade to the latest version, PRESS NO!
Now we will see that magisk is installed correctly.
We see that we can use all its functions.
We will proceed to verify if we have root access.
Download root checker
And Voila!
MEGA link: https://mega.nz/#F!ud8VwKRJ!-cJr7EJyhb1PkziNx5KvLQ2
Nice work! This confirms that the bootloader is unlocked, which means we can then use just the firehose to flash these files. I will work on writing something up for that.2@nvizync You should thank me for my boot.img mod of -Z835V2.0.0B10 (Magisk 17.1)
my boot.img mod of:
-Z835V1.0.0B13 (Magisk 18.1) Link: https://mega.nz/#F!88IiFapI!6Peah7woOOaIhusfYCAEcw
-Z835V2.0.0B10 (Magisk 18.1) link: https://mega.nz/#F!V4pAVIYQ!19tWE7_xk_aQtyiu050Y7A
-Z835V2.0.0B12 (Magisk 18.1) Link: https://mega.nz/#F!9lBVkQAZ!WqnRvYa4qcw5MgRxhp1hcA
Thanks for your detailed flash root tutorial2Help me!! After downloading the files on my cell phone it turned off and did not turn on again, I connect the charger and does not charge or turn on the screen or the led, I can not enter FTM mode or recovery, the pc does not detect any device when I connect it, please help me what I can do, I need the cell phone I do not have money to buy me another one.
sorry for my english use google translator.
if the pc does not detect it, you must put it in EDL mode manually uncovering the phone and doing test point
1
You can install titanium backup, twrp is not possible at this point, no one has done it yet, you can delete system apps through adb, using
Code:adb shell pm uninstall -k --user 0 packagename
But i haven't figured out yet how to get rw permission on system/apps so i can delete system apk's.
