[TUTORIAL] Unbrick xolo Q1010i

[Reconfigured]

hey guys finally managed to unbrick my xolo q1010i.. did tried a lot to get it back..

in case you get locked at abd sideload <filename>"...

just press power button + volume dowm button for 10sec

phone will restart...

FIRSTLY DON't EVER... AND NEVER EVER INSTALL "CHAINFIRE 3D" ON ANY XOLO WITH MEDIATEK PROCESSORS!!!!

its because chainfire is specially made for ARM devices and not for our MEDIATEK neon processors..

so before we start we need these tools and files...

SP TOOLS


Stock Q1010i 4.4.2 S002https://www.dropbox.com/s/1ih3a4nnma9g3mo/Stock q1010i 4.4.2 S002.7z?dl=0


DRIVERS
Driver_Auto_Installer_v1.1236.00.7z

this thread is for both hardbrick and softbrick.

there are two possibilites you might have caught up with..

1. Stuck at XOLO logo...
2. Not booting up...

so in either case follow this steps..
unfortunately i got caught in both...

so lets begin...

Phase 1: Installing drivers..

no matter if you have already installed the drivers... please make sure you install these again..
unzip the file " Driver_Auto_Installer_v1.1236.00.7z" from link.

run install.bat a command screen will popup saying install sp unsigned inf..

and pop up will come warning to ask you to install the driver or not simply install it.. the warning comes coz its just unsigned drivers not a big deal..

so the pop up will come like 2 or 4 times i actually didnt counted and it will take around 3 to 5 min to install it.. after installation of drivers the command screen will say

install complete press any key to continue... :good:
Phase 2: Installing SPtools, setting up ROM

so download the SPtools ROM from link

extract SPTOOLS in some folder say folder1;
and extract ROM in folder say folder2;

then

start flash_tool.exe

select scatter file from folder where ROM is ectracted.. (folder2)
all the files will be then automatically loaded

just make sure that phone is turned off in any case..

download button... and connect the phone

there will be loading of files and then green circle window will open..
disconnect the phone then you're done and phone is back from dead... :laugh: :angel: :highfive:

PRESS THAnKS OR PAYPAL ME IF I'D HELPED YOU...

 

[K.khiladi]

I haven't been in such a condition but still thanks for informing..

Sent from my Q1010i using Tapatalk

 

[nishantgupta107]

My phone is not booting, even after installing drivers provided here.
It is now saying Device not recognized whenever i connect my phone. I have also tried other jacks, uninstalled and re-installed the drivers but nothing.
I think it is hard brick!!
Help please!!!

 

[Sourendrakundu]

hey man, I have got my Xolo q1010i bricked and have come here to you for a solution. But I have one thing to ask you that, my phone has built-in battery and in the phase 2, you ask me to keep my phone off when I connect it to my PC. But it is out of my control and when I connect it to my PC through USB, it turns on to the xolo logo. What is a possible solution? Do I have to remove the battery socket to keep it off?
It is possible for me. Tell me if it is to be done.
.
[Reply by self]
Dude, solved the issue. Actually there were no issue as when I connect the phone to my PC when the "Download" button is already pressed in the SP Tool app, it automatically prevents the phone from booting up and solves the problem. If the phone is connected properly and the driver is installed OK, then there is actually no possibility for an error to occur.
Thanks dude, You saved my phone.

 

[cbdave88]

xolo q1010i hang on XOLO logo

Hello, I clear eMMC of my mobile. After that it hangs on XOLO logo. I tried to install ROM using SP tool. The process complete and it shows "Download OK" at the end but still when i start after process it hangs on XOLO logo. I tried to download different ROM but the situation remains same.
Am I missing some process that is needed after clear eMMC?