{Tutorials} Increase Apps Storage In Mtk devices

[email protected]

Senior Member
Aug 17, 2013
595
2,190
0
Mumbai
Increase Apps Storage Partition In Mediatek Devices



FAQ :​

* Is It Safe To Increase Apps Storage Partition
- Yes

* From Where Storage Increasing In Apps Storage
- This Process Will Merge Internal Sd Card Storage To Apps Storage Partition

* How i can revert it If i neeeded Internal Storage
- Flash ur Stock Rom

* This is permanent No need to do again and again


DOWNLOAD :

1. Hex editor :http://d-h.st/idJ

2. Sp flash tool : http://d-h.st/ol7



Requirements :


1. Hex editor (Download from the above link)

2. Stock Rom (only needed ebr1 and ebr2 files)

3. Sp Flash Tool (Download from above link)

4 Little Knowledge about flashing Rom through Sp Flash tool


Notes :


1. After Doing This process your data will be formatted ,Make sure u backup Your Rom Or Data

2. Backup your Internal Sd before doing this process


Procedure :​


1. Install Hex Editor In your Pc

2. Extract your Stock Rom and Grab ebr1 and ebr2 file and copy to ur desktop

3. Open Both ebr1 and ebr2 Files In Hex editor

4. Now go to ebr1 File tab Scroll Down And There you will notice 4 blocks these are Partition Line (see ss which partition going to edit in nxt step)

5. Now See In screenshots the one Is highlighted In Red you Need to increase +1 (This +1 increase 500Mb in your apps storage and decrease 500Mb from Internal Storage)
Notes: use table which is given below to calculate it then do +1 and -1 (sum and addition like A=10 and 1=1 which will become after adding 11)
This is table you have to use to add +1 and -1
Dec-Hex
0 = 0
1 = 1
2 = 2
3 = 3
4 = 4
5 = 5
6 = 6
7 = 7
8 = 8
9 = 9
10 = A
11 = B
12 = C
13 = D
14 = E
15 = F



6. Now Go to Ebr2 file Tab scroll down and there you will get 2 partition line (see ss which partition needed to edit in next step)

7.Now See ss There u will need to edit 2 blocks first need to increase +1 and in second block decreases to -1 (see in ss)


8. Again use table which is in steps 5.

9. save it both files.

10. Now load scatter file of your stock rom in sp flash tool, After loaded all files untick all except ebr1 and ebr2 file ,Double click on the ebr1 file and browse and select new saved ebr1 file and do same as ebr2



11. Click on Download and connect your cell (Make sure u installed driver properly)

12. After green window shown, Disconnect your cell and go to cwm recovery or stock recovery


13. Click on format data/cache factory reset and also do cache wipe

14. Restore your Rom or Data

15. After reboot ur phone from cwm or stock recovery and If Internal SD storage showing format do format

16. enjoy with increased apps storage..

Here Is the Final SS (Note: Am using Color Rom By me with swaped sd card in c2+, phone storage showing sd card )


List Of Device Successfully Increased There Apps Storage

1. Micromax A117 (Magnus)...............By Johnny199314

2. Starmobile Diamond V7..................By chleoj

 

Attachments

Last edited:

Johnny199314

Senior Member
May 13, 2013
604
66
0
Increase Apps Storage Partition In Mediatek Devices



FAQ :​

* Is It Safe To Increase Apps Storage Partition
- Yes

* From Where Storage Increasing In Apps Storage
- This Process Will Merge Internal Sd Card Storage To Apps Storage Partition

* How i can revert it If i neeeded Internal Storage
- Flash ur Stock Rom

* This is permanent No need to do again and again


DOWNLOAD :

[1. Hex editior :http://d-h.st/idJ

2. Sp flash tool : http://d-h.st/ol7


Requirements :


1. Hex editor (Download from the above link)

2. Stock Rom (only needed ebr1 and ebr2 files)

3. Sp Flash Tool (Download from above link)

4 Little Knowledge about flashing Rom through Sp Flash tool


Notes :


1. After Doing This process your data will be formatted ,Make sure u backup Your Rom Or Data

2. Backup your Internal Sd before doing this process


Procedure :​

1. Install Hex Editor In your Pc

2. Extract your Stock Rom and Grab ebr1 and ebr2 file and copy to ur desktop

3. Open Both ebr1 and ebr2 Files In Hex editor

4. Now go to ebr1 File tab Scroll Down And There you will notice 4 blocks these are Partition Line (see ss which partition going to edit)

5. Now See In screenshots the one Is highlighted In Red you Need to increase +1 (This +1 increase 500Mb in your apps storage and decrease 500Mb from Internal Storage)
Notes: use table which is given below to calculate it then do +1 and -1 (sum and addition like A=10 and 1=1 which will become after adding 11)




6. Now Go to Ebr2 file Tab scroll down and there you will get 2 partition line (see ss which partition needed to edit)

7.Now See ss There u will need to edit 2 blocks first need to increase +1 and in second block decreases to -1 (see in ss)


8. Again use table which is in steps 5.

9. save it both files.

10. Now load scatter file of your stock rom in sp flash tool

11. After loaded all files untick all except ebr1 and ebr2 file ,Double click on the ebr1 file and browse and select new saved ebr1 file and do same as ebr2

12. Click on Download and connect your cell (Make sure u installed driver properly)

13. After green window shown, Disconnect your cell and go to cwm recovery or stock recovery

14. Click on format data/cache factory reset and also do cache wipe

15. Backup your Rom or Data

16. After reboot ur phone from cwm or stock recovery and inrernal storage showing format do format

17. enjoy with increased apps storage..

Bro screen shots image corrupted pls upload new one

Sent from my Micromax A117 using XDA Premium 4 mobile app
 

kailashnj

Senior Member
Nov 1, 2007
733
105
0
Increase Apps Storage Partition In Mediatek Devices



FAQ :​

* Is It Safe To Increase Apps Storage Partition
- Yes

* From Where Storage Increasing In Apps Storage
- This Process Will Merge Internal Sd Card Storage To Apps Storage Partition

* How i can revert it If i neeeded Internal Storage
- Flash ur Stock Rom

* This is permanent No need to do again and again


DOWNLOAD :

[1. Hex editior :http://d-h.st/idJ

2. Sp flash tool : http://d-h.st/ol7


Requirements :


1. Hex editor (Download from the above link)

2. Stock Rom (only needed ebr1 and ebr2 files)

3. Sp Flash Tool (Download from above link)

4 Little Knowledge about flashing Rom through Sp Flash tool


Notes :


1. After Doing This process your data will be formatted ,Make sure u backup Your Rom Or Data

2. Backup your Internal Sd before doing this process


Procedure :​

1. Install Hex Editor In your Pc

2. Extract your Stock Rom and Grab ebr1 and ebr2 file and copy to ur desktop

3. Open Both ebr1 and ebr2 Files In Hex editor

4. Now go to ebr1 File tab Scroll Down And There you will notice 4 blocks these are Partition Line (see ss which partition going to edit)

5. Now See In screenshots the one Is highlighted In Red you Need to increase +1 (This +1 increase 500Mb in your apps storage and decrease 500Mb from Internal Storage)
Notes: use table which is given below to calculate it then do +1 and -1 (sum and addition like A=10 and 1=1 which will become after adding 11)




6. Now Go to Ebr2 file Tab scroll down and there you will get 2 partition line (see ss which partition needed to edit)

7.Now See ss There u will need to edit 2 blocks first need to increase +1 and in second block decreases to -1 (see in ss)


8. Again use table which is in steps 5.

9. save it both files.

10. Now load scatter file of your stock rom in sp flash tool

11. After loaded all files untick all except ebr1 and ebr2 file ,Double click on the ebr1 file and browse and select new saved ebr1 file and do same as ebr2

12. Click on Download and connect your cell (Make sure u installed driver properly)

13. After green window shown, Disconnect your cell and go to cwm recovery or stock recovery

14. Click on format data/cache factory reset and also do cache wipe

15. Backup your Rom or Data

16. After reboot ur phone from cwm or stock recovery and inrernal storage showing format do format

17. enjoy with increased apps storage..

Dude - screen shots are not working. Kindly reupload them.
 
  • Like
Reactions: islimshady

ccav2000

Senior Member
Dec 19, 2010
2,057
1,122
0
Manga Cafe

kailashnj

Senior Member
Nov 1, 2007
733
105
0
The meteos tool does not work on the OPPO R819, it bricks the phone requiring flashing of the stock ROM with the flash tool. Just a warning to the R819 users, as this has been already tried 2 months ago.
Hi,

Are you sure you used the 6589 meteos tool. Probably you would have used the 657X tool and that will brick your phone. I did that myself too and did not realise it. Try it with the 6589 meteos tool and check if its sucessful and let me know the outcome.
 

ccav2000

Senior Member
Dec 19, 2010
2,057
1,122
0
Manga Cafe
Hi,

Are you sure you used the 6589 meteos tool. Probably you would have used the 657X tool and that will brick your phone. I did that myself too and did not realise it. Try it with the 6589 meteos tool and check if its sucessful and let me know the outcome.
I cannot confirm because it was not me that tried it. A forum member in the OPPO forums did it and he told me, also he gave me the recovery tools he got from their support, including the necessary drivers, OPPO specially modified SP-Flash tool and the ROM.

Also, the OPPO R819 only has TWRP, in the Meteos thread CMW is refered as required, not sure if that plays a role.
 

kailashnj

Senior Member
Nov 1, 2007
733
105
0
I cannot confirm because it was not me that tried it. A forum member in the OPPO forums did it and he told me, also he gave me the recovery tools he got from their support, including the necessary drivers, OPPO specially modified SP-Flash tool and the ROM.

Also, the OPPO R819 only has TWRP, in the Meteos thread CMW is refered as required, not sure if that plays a role.
In that case try it out using this trick. It might help.

If I want to follow your tutorial, should I root first my phone or not?
Thanks.
You will need rooted phone.
 

ccav2000

Senior Member
Dec 19, 2010
2,057
1,122
0
Manga Cafe
In that case try it out using this trick. It might help.



You will need rooted phone.
I was looking at the EBR files of another guide here in XDA for the A116 and there seems to be a difference there, the changed value in EBR2 at the 01cc offeset, they changed the first digit, while on this tutorial here the second diggit is changed. Could this indicate different parition schemes? If OPPO also has different partitions, perhaps that is why the Meteos app killed the R819. The R819 has 16GB of ROM, most other MTK6589 have up to 8GB.

---------- Post added at 01:00 PM ---------- Previous post was at 12:47 PM ----------

To be sure: These are the mount points of the OPPO R819:
Code:
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p5
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p6
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p1
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p8
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected]_f -> /dev/block/mmcblk0p2
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected]_s -> /dev/block/mmcblk0p3
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected]_ro -> /dev/block/mmcblk0p4
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p7
And the mount points:
Code:
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/mmcblk0p6 on /cache type ext4 (rw,relatime,data=ordered)
/dev/block/mmcblk0p8 on /sdcard type vfat (rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/block/mmcblk0p8 on /and-sec type vfat (rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/block/mmcblk0p5 on /system type ext4 (rw,relatime,data=ordered)
/dev/block/mmcblk0p7 on /data type ext4 (rw,relatime,data=ordered)
 

[email protected]

Senior Member
Aug 17, 2013
595
2,190
0
Mumbai
I was looking at the EBR files of another guide here in XDA for the A116 and there seems to be a difference there, the changed value in EBR2 at the 01cc offeset, they changed the first digit, while on this tutorial here the second diggit is changed. Could this indicate different parition schemes? If OPPO also has different partitions, perhaps that is why the Meteos app killed the R819. The R819 has 16GB of ROM, most other MTK6589 have up to 8GB.

---------- Post added at 01:00 PM ---------- Previous post was at 12:47 PM ----------

To be sure: These are the mount points of the OPPO R819:
Code:
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p5
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p6
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p1
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p8
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected]_f -> /dev/block/mmcblk0p2
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected]_s -> /dev/block/mmcblk0p3
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected]_ro -> /dev/block/mmcblk0p4
lrwxrwxrwx root     root              1970-01-01 00:00 [email protected] -> /dev/block/mmcblk0p7
And the mount points:
Code:
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/mmcblk0p6 on /cache type ext4 (rw,relatime,data=ordered)
/dev/block/mmcblk0p8 on /sdcard type vfat (rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/block/mmcblk0p8 on /and-sec type vfat (rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/block/mmcblk0p5 on /system type ext4 (rw,relatime,data=ordered)
/dev/block/mmcblk0p7 on /data type ext4 (rw,relatime,data=ordered)
This mount point is same as in Micromax C2+ which i used to increase the apps storage ,Hence it will work on OPPO R819
 

Johnny199314

Senior Member
May 13, 2013
604
66
0
Bro in ebr 2 there is c0 how should I decrease pls help

Sent from my Micromax A117 using XDA Premium 4 mobile app

---------- Post added at 07:27 PM ---------- Previous post was at 07:25 PM ----------

Will this method work in Magnus mtk turbo processor

Sent from my Micromax A117 using XDA Premium 4 mobile app