• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[TWRP 3.0.2-1] [ROOT] Samsung Galaxy J2 SM-J200H

Search This thread

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,110
9,895
teamwin-recovery-project-twrp-logo.jpg


TWRP custom recovery for the Samsung Galaxy J2 SM-J200H. Spreadtrum SC8830A.
Latest build is 3.0.2-1




Disclaimer: you flash these at your own risk. Knox counter will be tripped. Having the stock firmware to hand is also advised.

NOTE: BEFORE MAKING MODIFICATIONS, ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.





To install TWRP:

Boot to DOWNLOAD mode.
Flash with ODIN in the AP slot.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.

twrp_3.0.2-1_sm-j200h_fb_271016



For Systemless Root with SuperSu.

1. Install Supersu via TWRP
SR1-SuperSU-v2.78-SR1-20160915123031

2. Reboot

3. Check you have root



PLEASE LEAVE FEEDBACK IF YOU FIND MY WORK USEFUL. THANKS.


DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

Credits: Samankh for testing.

 
Last edited:

Samankh

Senior Member
Jan 13, 2016
50
66
Duhok

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,110
9,895
  • Like
Reactions: Samankh

Samankh

Senior Member
Jan 13, 2016
50
66
Duhok
Last edited:

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,110
9,895

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,110
9,895
new problem , recovery is not seandroid enforcing

i will flash prerooted firmware and sent log to you
Don't worry about the SEANDROID message I can fix that any time.

Does this device have OEM unlock in developer settings?
Do you see 'secure check fail' on the device display?

By the way how long are you waiting for twrp to boot?
I have known it to take several minutes on a difficult device.
 
  • Like
Reactions: Samankh

Samankh

Senior Member
Jan 13, 2016
50
66
Duhok
Don't worry about the SEANDROID message I can fix that any time.

Does this device have OEM unlock in developer settings?
Do you see 'secure check fail' on the device display?

By the way how long are you waiting for twrp to boot?
I have known it to take several minutes on a difficult device.

Yes i active OEM unlock
no i dont see it

need 1 min or more
 

ashyx

Inactive Recognized Contributor
Oct 14, 2012
15,110
9,895

Well the good news is that twrp is at least working. Blank display seems to be an issue with the framebuffer.

However I don't understand your comment above, what needs 1 min or more?

Also could I ask you to flash the first twrp build I sent you and then save the recovery log again, so I can compare the logs?
 
  • Like
Reactions: Samankh

Top Liked Posts

  • There are no posts matching your filters.
  • 39
    teamwin-recovery-project-twrp-logo.jpg


    TWRP custom recovery for the Samsung Galaxy J2 SM-J200H. Spreadtrum SC8830A.
    Latest build is 3.0.2-1




    Disclaimer: you flash these at your own risk. Knox counter will be tripped. Having the stock firmware to hand is also advised.

    NOTE: BEFORE MAKING MODIFICATIONS, ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
    Settings -> Developer Options -> OEM unlocking
    AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.





    To install TWRP:

    Boot to DOWNLOAD mode.
    Flash with ODIN in the AP slot.
    Uncheck Auto reboot.
    Load the respective file below into the AP slot and hit start.
    After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
    As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
    You should now see TWRP recovery.

    twrp_3.0.2-1_sm-j200h_fb_271016



    For Systemless Root with SuperSu.

    1. Install Supersu via TWRP
    SR1-SuperSU-v2.78-SR1-20160915123031

    2. Reboot

    3. Check you have root



    PLEASE LEAVE FEEDBACK IF YOU FIND MY WORK USEFUL. THANKS.


    DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

    Credits: Samankh for testing.

    3
    @ashyx can we hope twrp 3.1.0 for this device
    I'm currently ploughing my way through all my builds and updating, there are many and my time is limited, but I'll get to it soon.
    3
    thanks

    teamwin-recovery-project-twrp-logo.jpg


    TWRP custom recovery for the Samsung Galaxy J2 SM-J200H. Spreadtrum SC8830A.
    Latest build is 3.0.2-1




    Disclaimer: you flash these at your own risk. Knox counter will be tripped. Having the stock firmware to hand is also advised.

    NOTE: BEFORE MAKING MODIFICATIONS, ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
    Settings -> Developer Options -> OEM unlocking
    AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.





    To install TWRP:

    Boot to DOWNLOAD mode.
    Flash with ODIN in the AP slot.
    Uncheck Auto reboot.
    Load the respective file below into the AP slot and hit start.
    After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
    As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
    You should now see TWRP recovery.

    twrp_3.0.2-1_sm-j200h_fb_271016



    For Systemless Root with SuperSu.

    1. Install Supersu via TWRP
    SR1-SuperSU-v2.78-SR1-20160915123031

    2. Reboot

    3. Check you have root



    PLEASE LEAVE FEEDBACK IF YOU FIND MY WORK USEFUL. THANKS.


    DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

    Credits: Samankh for testing.



    thanks :fingers-crossed:
    3
    Will it work for j200gd???

    Only Samsung Galaxy SM-J200H is Spreadtrum others is Exynos. Hence this TWRP will not work. Find TWRP for your model then follow remaining procedures.
    2
    More details please. [emoji52]