[TWRP 3.0.2-1] [ROOT] Samsung Galaxy J2 SM-J200H

[Parthib]

Disable Samsung MTP in the kernel config.

Opps.I forgot about that.....let me check.....

 

[mahiragazade]

dear members, I installed TWRP succesfully., but cant enter twrp by vol+ home power buttons combination.
please help.

 

[Mrukey]

dear members, I installed TWRP succesfully., but cant enter twrp by vol+ home power buttons combination.
please help.

Turn off your device
Hold power+home+volume up
That should work. If not are you getting an "× is not seandroid enforcing error" on boot?

 

[Mrukey]

thank.
i have an another problem... I did root and supersu and TWRP on my phone.
after the phone run...
but after I though that it was not necessery to keep OEM.
an now I am problem : "custom binary blocked by FAP block".
What can I do ?
I did backup withTWRP : 2017-04-02--13-22-06_LMY48B.J200HXXU0APK1 on my sd carte.
Can this be useful to me ?
thanks !

Heyoo! I had this problem too when I flashed with ODIN. You have to Unlock the bootloader and keep it unlocked. At least that worked for me l.

 

[HatMan22]

TWRP custom recovery for the Samsung Galaxy J2 SM-J200H. Spreadtrum SC8830A.
Latest build is 3.0.2-1



Disclaimer: you flash these at your own risk. Knox counter will be tripped. Having the stock firmware to hand is also advised.

NOTE: BEFORE MAKING MODIFICATIONS, ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.




To install TWRP:

Boot to DOWNLOAD mode.
Flash with ODIN in the AP slot.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.

twrp_3.0.2-1_sm-j200h_fb_271016


For Systemless Root with SuperSu.

1. Install Supersu via TWRP
SR1-SuperSU-v2.78-SR1-20160915123031

2. Reboot

3. Check you have root



PLEASE LEAVE FEEDBACK IF YOU FIND MY WORK USEFUL. THANKS.


DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

Credits: Samankh for testing.

Will it work with SM J200H (SC7730SE)?

 

[adarshadhungel1]

Will it work with SM J200H (SC7730SE)?

This TWRP is for J200H. So yes.

 

[HatMan22]

This TWRP is for J200H. So yes.

Thanks it worked..

 

[HatMan22]

Thanks It Worked

TWRP custom recovery for the Samsung Galaxy J2 SM-J200H. Spreadtrum SC8830A.
Latest build is 3.0.2-1



Disclaimer: you flash these at your own risk. Knox counter will be tripped. Having the stock firmware to hand is also advised.

NOTE: BEFORE MAKING MODIFICATIONS, ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.




To install TWRP:

Boot to DOWNLOAD mode.
Flash with ODIN in the AP slot.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.

twrp_3.0.2-1_sm-j200h_fb_271016


For Systemless Root with SuperSu.

1. Install Supersu via TWRP
SR1-SuperSU-v2.78-SR1-20160915123031

2. Reboot

3. Check you have root



PLEASE LEAVE FEEDBACK IF YOU FIND MY WORK USEFUL. THANKS.


DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

Credits: Samankh for testing.

Thanks it worked with my Samsung J2 (SM-J200H) NPL. But how can I install future OTA updates? It replaced stock recovery with TWRP. If I flash my again with stock recovery then will it be possible to get normal OTA updates since root is systemless? Any idea?

 

[Keng Martin]

ROOT TWRP 3.0.2-1 ROOT SAMSUNG GALAXY GRAND PRIME Creation Failed Mesenger Unistall and installer

 

[Noel Biji]

Thanks it worked..

Will it work for j200gd???

 

[HatMan22]

Will it work for j200gd???

Only Samsung Galaxy SM-J200H is Spreadtrum others is Exynos. Hence this TWRP will not work. Find TWRP for your model then follow remaining procedures.

 

[LUBU LUBU]

Root

 

[ashyx]

Root

Trees, plants etc.

 

[samsung galaxi j2]

root

 

[werner van deventer]

sucsessfull!!!!

i must admit to not reading the first five times then just going to another webpage then after reading and following the instructions sucsess thank you for your hard work

thank you
thank you

 

[Seagold]

I'm running ? 87.1 with 3.1.4

 

[iceykel17]

help

can you help me i did everything but nothing happens . only CWM is working . please help

 

[HatMan22]

can you help me i did everything but nothing happens . only CWM is working . please help

plz tell in detail to get help. This guide is telling about TWRP not CWM.

 

[iceykel17]

plz tell in detail to get help. This guide is telling about TWRP not CWM.

sorry , im trying to install TWRP on my j200h so i can root it cause all forums required TWRP , but whenever i tried to install nothing happens . CWM(installed recovery) is still installed not TWRP. i think i tried everything on XDA but none of them works . dont know what to do now

 

[ashyx]

sorry , im trying to install TWRP on my j200h so i can root it cause all forums required TWRP , but whenever i tried to install nothing happens . CWM(installed recovery) is still installed not TWRP. i think i tried everything on XDA but none of them works . dont know what to do now

As previously advised this recovery is TWRP.
If you have previously installed CWM then I suggest you consult the thread where you downloaded it.