TWRP 3.3.1 for the Redmi Pro

[vassago057]

Hello!
how do i flash the TWRP? is there a manual?
Thanks!

 

[AryanFL]

Hello!
how do i flash the TWRP? is there a manual?
Thanks!

Here
https://forum.xda-developers.com/redmi-pro/how-to/twrp-redmi-pro-t3516227

---------- Post added at 04:27 AM ---------- Previous post was at 04:25 AM ----------

Finally managed to boot up TWRP 3.2.1!
I debugged it and apparently it was missing a lib

Will test it a bit to make sure everything works and upload it soon!

thanks for working,Does it work right on miui 9.5.3?

 

[end222]

Here
https://forum.xda-developers.com/redmi-pro/how-to/twrp-redmi-pro-t3516227

---------- Post added at 04:27 AM ---------- Previous post was at 04:25 AM ----------



thanks for working,Does it work right on miui 9.5.3?

You may have some bootloop problems with the official ROM so I would recommend you to use the official recovery with it.

If you are using xiaomi.eu or any other custom ROM it will work well

 

[end222]

Updated to 3.2.2

 

[xpil]

TWRP 3.2.2

I have a rooted redmi pro with twrp 3.1.1. If I flash the 3.2.2 over it am I ready to go, or I have to do something else?
thanks

 

[end222]

I have a rooted redmi pro with twrp 3.1.1. If I flash the 3.2.2 over it am I ready to go, or I have to do something else?
thanks

You can flash it over it and you can even flash it from TWRP itself.
Just go to the Install section, choose "Install image" and install the .img in the recovery partition

Enviado desde mi Redmi Pro mediante Tapatalk

 

[xpil]

You can flash it over it and you can even flash it from TWRP itself.
Just go to the Install section, choose "Install image" and install the .img in the recovery partition

Enviado desde mi Redmi Pro mediante Tapatalk

Thank you. I followed your directions. Everything worked and I performed nandroid backup WITHOUT compression successfully.
I repeated though the process WITH compression and twrp failed to finish. The error log is the following:

I:Closing tar
I: pig z process ended with RC=0
Splitting thread ID 0 into archive 2
I:Using compression...
I:fork( ) failed
Error creating backup.
I:Error creating tar '/data/media/0/TWRP/BACKUPS/P7AMGYSOHILRBU4P/2018-07-06--17-11-31_xiaomieu.inter/data.ext4.win001' for thread 0
Error creating backup.
I:ERROR tarList for thread ID 0
Error creating backup.
I:InfoManager saving '/data/media/0/TWRP/BACKUPS/P7AMGYSOHILRBU4P/2018-07-06--17-11-31_xiaomieu.inter/data.info'
createTarFork() process ended with ERROR: 255
Backup Failed. Cleaning Backup Folder.

COULD YOU OR SOMEBODY TELL ME WHY I GOT ERROR 255 WHEN ENABLED COMPRESSION????

 

[end222]

Thank you. I followed your directions. Everything worked and I performed nandroid backup WITHOUT compression successfully.
I repeated though the process WITH compression and twrp failed to finish. The error log is the following:

I:Closing tar
I: pig z process ended with RC=0
Splitting thread ID 0 into archive 2
I:Using compression...
I:fork( ) failed
Error creating backup.
I:Error creating tar '/data/media/0/TWRP/BACKUPS/P7AMGYSOHILRBU4P/2018-07-06--17-11-31_xiaomieu.inter/data.ext4.win001' for thread 0
Error creating backup.
I:ERROR tarList for thread ID 0
Error creating backup.
I:InfoManager saving '/data/media/0/TWRP/BACKUPS/P7AMGYSOHILRBU4P/2018-07-06--17-11-31_xiaomieu.inter/data.info'
createTarFork() process ended with ERROR: 255
Backup Failed. Cleaning Backup Folder.

COULD YOU OR SOMEBODY TELL ME WHY I GOT ERROR 255 WHEN ENABLED COMPRESSION????

I will give it a look when I have time, thanks for the feedback

Enviado desde mi Redmi Pro mediante Tapatalk

 

[end222]

Thank you. I followed your directions. Everything worked and I performed nandroid backup WITHOUT compression successfully.
I repeated though the process WITH compression and twrp failed to finish. The error log is the following:

I:Closing tar
I: pig z process ended with RC=0
Splitting thread ID 0 into archive 2
I:Using compression...
I:fork( ) failed
Error creating backup.
I:Error creating tar '/data/media/0/TWRP/BACKUPS/P7AMGYSOHILRBU4P/2018-07-06--17-11-31_xiaomieu.inter/data.ext4.win001' for thread 0
Error creating backup.
I:ERROR tarList for thread ID 0
Error creating backup.
I:InfoManager saving '/data/media/0/TWRP/BACKUPS/P7AMGYSOHILRBU4P/2018-07-06--17-11-31_xiaomieu.inter/data.info'
createTarFork() process ended with ERROR: 255
Backup Failed. Cleaning Backup Folder.

COULD YOU OR SOMEBODY TELL ME WHY I GOT ERROR 255 WHEN ENABLED COMPRESSION????

I have just tried to recreate what you have done but I did not get any error. I made a backup with compression enabled of the data partition and it finished successfully.
Do you have any other option enabled?

Also, the error 255 appears usually when the process is cancelled by the user

Enviado desde mi Redmi Pro mediante Tapatalk

 

[xpil]

I have just tried to recreate what you have done but I did not get any error. I made a backup with compression enabled of the data partition and it finished successfully.
Do you have any other option enabled?

Also, the error 255 appears usually when the process is cancelled by the user

Enviado desde mi Redmi Pro mediante Tapatalk

No I do not have any other switches on and I have not cancelled the backup process. I do not know if the size of the backup ( 13 GB ) is the cause of the problem.

 

[end222]

No I do not have any other switches on and I have not cancelled the backup process. I do not know if the size of the backup ( 13 GB ) is the cause of the problem.

That shouldn't be a problem if you had enough free space.
Were you using adb or did you do the backup on the phone?

Enviado desde mi Redmi Pro mediante Tapatalk

 

[xpil]

I performed a backup on the phone. In the meantime I solved the problem. I read somewhere on the internet that I had to search the created log file in order to find the directory that caused the 255 error. In my case this directory belonged to an application called "windy". By removing this application the 255 error disappeared. Thanks for your interest...

 

[end222]

I performed a backup on the phone. In the meantime I solved the problem. I read somewhere on the internet that I had to search the created log file in order to find the directory that caused the 255 error. In my case this directory belonged to an application called "windy". By removing this application the 255 error disappeared. Thanks for your interest...

Glad you solved it!

Enviado desde mi Redmi Pro mediante Tapatalk

 

[end222]

Updated to 3.2.3!

 

[orcruin]

Hi all,
I have encrypted my data and TWRP cannot mount data partition anymore (never ask for the password, give only error).

Every one has the same issue and solved it?

Thank you

---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------

Hi all,
I have encrypted my data and TWRP cannot mount data partition anymore (never ask for the password, give only error).

Every one has the same issue and solved it?

Thank you

---------- Post added at 04:16 PM ---------- Previous post was at 04:13 PM ----------

Sorry,
I forget some data.

TWRP 3.2.2 from this post
ROM XIAOMI.EU - 8.7.26

Thanks again

 

[laijirong]

Thanks a lot

 

[zamvi]

Thanks for sharing!

 

[jellybean13]

Today I want to share with you the device tree I have made to compile TWRP for our Redmi Pro as well as the images of TWRP to install directly to the device.

What are the advantages of having the recovery compiled from source?
The main advantage of having the recovery compiled from source is the ease to get the recovery updated. Whenever TWRP updates their recovery we will have that version in our phones because we will only need to compile the recovery with the device tree that is already done and that should work perfectly and shouldn't take more than half an hour if everything goes well.

Then I will be updating the recovery when a new version is released

Download Links:

Latest version: 3.2.3

3.2.3: https://www.androidfilehost.com/?fid=5862345805528068262
3.2.2: https://www.androidfilehost.com/?fid=5862345805528040452
3.2.1: https://www.androidfilehost.com/?fid=818222786056031658
3.1.1: https://www.androidfilehost.com/?fid=745425885120733557
3.1.0: https://www.androidfilehost.com/?fid=457095661767152066

If you like my work you can offer me a beer here
https://www.paypal.me/OrdunaLagarma

XDA:DevDB Information
TWRP, Tool/Utility for the Xiaomi Redmi Pro

Contributors
end222
Source Code:https://github.com/end222/twrp_omega_device_tree


Version Information
Status: Stable
Current Stable Version: 3.2.3
Stable Release Date: 2018-08-07

Created 2017-05-21
Last Updated 2018-08-07

This device tree and recovery image can be ported to nikel.
ONLY replace zImage (omega-->nikel) can make recovery work on nikel.

Sent from my nikel using XDA Labs

 

[xmixmaster]

Updated to 3.2.3!

Anything for project treble for omega?

 

[yplim2300]

How to install TWRP?