• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[TWRP][3.6.0-11-b7][instantnoodle]TWRP for OnePlus 8/8Pro ][OFFICIAL][BETA]

Search This thread

hurvi

Member
Sep 19, 2015
27
8
Windhagen
can i use im beta 7 the advanced wipe function to make a clean flash of a custom rom (AICP) over a oos 11 system?
i read that the wipe function must not be used because something is wrong with the assignment?
 

dladz

Senior Member
Aug 24, 2010
13,196
4,226
Liverpool
Huawei Watch 2
OnePlus 8
does anybody have 10.0.8.8 IN11BA stock recovery .img file and could upload it?
If you're on 8.8 OOS you can pull it yourself using payload dumper. It's good practice to be able to obtain it yourself.

My root guide in guides and discussion can show you exactly how...

Then just flash it in fastboot.
 

enjoy_life

Senior Member
Mar 5, 2016
167
77
Yesterday tried to restore my OOS backup after tinkering with a custom ROM. There were no errors when I took the backup. Data restored fine without errors too, but the system didn't boot afterwards, it was boot looping. I did a wipe - factory reset before restoring. Lost about two hours trying to restore the backup so that it would boot and all was in vain. So I had to MSM eventually 🙂 I used beta 7 for backing up and restoring.
 

dyval

Senior Member
Yesterday tried to restore my OOS backup after tinkering with a custom ROM. There were no errors when I took the backup. Data restored fine without errors too, but the system didn't boot afterwards, it was boot looping. I did a wipe - factory reset before restoring. Lost about two hours trying to restore the backup so that it would boot and all was in vain. So I had to MSM eventually 🙂 I used beta 7 for backing up and restoring.
Just curious. Did you follow the instructions on the 2nd post?
 

enjoy_life

Senior Member
Mar 5, 2016
167
77
Just curious. Did you follow the instructions on the 2nd post?
Of course. I removed the pin so that the system was unencrypted before backing it up. Then I did a factory reset before restoring.

I have a backup phone (Samsung A5 2017), which also has a TWRP installed. I backed up that phone and restored it over a dozen of times, so I'm kinda familiar with the process.

In this case I could eventually still install a custom ROM on a clean system and it would boot and work fine. However, the restored OOS backup never boots.
 
Last edited:

BillGoss

Senior Member
Sep 2, 2010
4,941
4,386
Sydney
OnePlus 3T
OnePlus 8T
Of course. I removed the pin so that the system was unencrypted before backing it up. Then I did a factory reset before restoring.

I have a backup phone (Samsung A5 2017), which also has a TWRP installed. I backed up that phone and restored it over a dozen of times, so I'm kinda familiar with the process.
The process as explained in post #2, when switching ROMs, is to do a format of /data, not a factory reset.
 
  • Like
Reactions: dyval

enjoy_life

Senior Member
Mar 5, 2016
167
77
The process as explained in post #2, when switching ROMs, is to do a format of /data, not a factory reset.

I did a format too (where it says type "yes" to continue). As I said, I tried to restore the backup over two hours multiple times, on a clean/wiped/completely formatted system. It does restore the backup without errors, but it never boots. I could still install a custom ROM though and it booted just fine.
 

mirdaVG

Member
Feb 11, 2010
12
0
Zagreb
I did a format too (where it says type "yes" to continue). As I said, I tried to restore the backup over two hours multiple times, on a clean/wiped/completely formatted system. It does restore the backup without errors, but it never boots. I could still install a custom ROM though and it booted just fine.
Same problem here, but with custom ROM.
 

BillGoss

Senior Member
Sep 2, 2010
4,941
4,386
Sydney
OnePlus 3T
OnePlus 8T
I did a format too (where it says type "yes" to continue). As I said, I tried to restore the backup over two hours multiple times, on a clean/wiped/completely formatted system. It does restore the backup without errors, but it never boots. I could still install a custom ROM though and it booted just fine.
When you backed up OOS, what partitions did you backup, other than data?
 

dladz

Senior Member
Aug 24, 2010
13,196
4,226
Liverpool
Huawei Watch 2
OnePlus 8
I backed up all partitions, except "persist" and "super partition". When restoring, I tried to restore all of them and also restored "data" only. It didn't make any difference.
Historically was a format required?

I mean it's going to nuke the device anyway?

I'll be honest I never bothered with Nand back ups but to me it sort of defeats the object if you need to wipe prior to a restore?
 
  • Like
Reactions: wgs1028

Top Liked Posts

  • There are no posts matching your filters.
  • 16
    uploaded beta 4.

    * 43a0dd18a custom theme: Fix the install custom theme
    * ff67337b9 SkipDecryption: Fix condition
    * 815c68f3e keymaster restore: Do not enter the keymaster_restore page repeatedly
    * edab9bb14 /sdcard: do not bind mount twice
    * 4d68b2663 Replace TWRP terminal UI from pcansi to bg1.25
    * e0ca1ecbf fscrypt v1: support legacy ioctl
    * c6c7935e9 kernel_module_loader: Set a prop after completing
    * f415adeae sdcard: bind mount /sdcard if not encrypted
    * 285ce8437 [WIP] Allow flashing lz4 images

    if AFH still have issues, mirrors:


    regards.
    12
    uploaded beta 7

    * 087491f - version: beta 7
    * b65b6c4 - update path to twrp recovery template
    * e0c9153 - instantnoodle: Fix battery and USB OTG detection
    * 249a787 - Additional build props path for OOS
    * 9e2f2b7 - Adding override props back
    * 2ffc7b8 - Fake reserve partition for OOS flashing

    fixed OOS flashing, OTG detection, and proper battery percentage detection

    regards.
    10
    uploaded beta 5.

    * a6cb8643c2 sdcard: only bind mount sdcard after successful preparation of data
    * 901396cb3e kernel_module_loader: Add missing gki directory
    * 9c91d2a62b kernel_module_loader: Set a prop after completing
    * 124abcd996 Partition_Property_Get: Get props from additional partitions
    * 0df7c9ef27 SkipDecryption: Fix condition



    regards.
    10
    let there be mirrors!

    added Sourceforge to "official" mirrors on OP.

    happy new year guys! :cool:
    8

    ill place the links to the latest build always on OP from now, on a mirror besides AFH.
  • 55
    TWRP for OnePlus 8 and 8 Pro
    h1641Xl - Imgur (1).jpg



    TWRP is an open source, community project. TWRP development is done by a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers, and zulip-chat.

    A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM".

    You can find the source code for TWRP at github.com/teamwin/android_bootable_recovery/

    Code:
    #include
    
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     */

    Code:
    /*
    *
    * Yea, though I walk through the valleys of c++ and java, of the shadow of death on these forums,
    * I will fear no evil and i will develop and code restless: for thou art with me and my keyboard;
    * thy rod and thy staff they comfort me, and my mouse..
    *
    */


    A12 support is still a WIP, but most things are working, A12 is all new, keep that in mind.

    WORKING:
    Decryption
    ADB Sideload
    Format Data
    Flashing zips (kernels and ROM's)
    Backup/Restore
    MTP is working
    adb is working
    vibration
    stock firmware flashing
    OTG

    NOT WORKING
    wip
    A12

    Download

    :: SourceForge ::

    ::
    AndroidFileHost ::



    Instructions

    Windows

    Install oneplus usb driver, after disabling driver signature enforcement

    Download and install platform tools, unzip and add the folder to Windows path,

    "Settings > Advanced System Settings > Environment Variables > New"

    Example -> http:///imgur.com/a/x8XOofQ

    open command prompt, or powershell, and:

    fastboot flash recovery_a twrpname.img
    fastboot flash recovery_b twrpname.img

    Linux

    Download and add to path (.bashrc) platform-tools:

    export PATH=$HOME"/platform-tools:$PATH"

    dont forget udev rules if you're using ubuntu based distro:

    https://github.com/M0Rf30/android-udev-rules

    open a terminal and:

    fastboot flash recovery_a twrpname.img
    fastboot flash recovery_b twrpname.img

    that's all.


    Source Code:

    https://github.com/infectedmushi/android_device_oneplus_instantnoodle-dev
    https://github.com/infectedmushi/android_bootable_recovery
    https://github.com/bigbiff/android_device_oneplus_instantnoodle
    https://github.com/TeamWin/android_bootable_recovery
    https://github.com/systemad/android_device_oneplus_instantnoodle

    Credits:
    @bigbiff
    @Lossyx
    @Captain_Throwback for original tree
    @mauronofrio for original tree
    TWRP team
    23
    uploaded beta 6.

    changelog:

    * Add custom kernel for recovery
    * crypto: only set crypto state and type if not already set
    * crypto: only show FBE error if device is encrypted
    * digest: fix checking of digest on restore
    * fs_mgr: allow deleting merged snapshots
    * merges: allow user to perform snapshot merges in advanced menu
    * mtp: don't create storage device after format data
    * recovery: Allow kernel to read and write unlabeled files
    * repacker: add root overwrite warning


    regards.
    23
    uploaded beta 3. it's possible now to backup persist partition also.

    twrp-op8-3.6.0_11-infected-b3.img
    twrp-op8-3.6.0_11-infected-b3.zip

    * 0c94cd7 - fstab: it's now possible to backup persist partition.
    * b99d112 - module load: Try loading prior modules first
    * 5ab53dc - libresetprop: use the latest header
    * 60927bc - kernel_module_loader: Set a prop after completing
    * 3a95d18 - fscrypt v1: support legacy ioctl
    * 540c802 - build: add option to create recovery installer zip
    * 7284ace - vndk: remove exclusion in recovery
    * aa2f760 - update_engine: handle payload that contain xbl_lp5 partitions
    * f1db62e - libresetprop: update to magisk HEAD
    * b65b045 - soong: Add TARGET_LEGACY_HW_DISK_ENCRYPTION conditional

    regards.
    21
    back to business guys. feels good to be ok, in good health and back to XDA..

    i'll compile a new build even today.

    let's keep rolling again!!

    regards.
    20
    uploaded beta 5.

    changelog:

    * install_keyring: only set props if not already set
    * recovery: Allow kernel to read and write unlabeled files
    * mtp: don't create storage device after format data
    * repacker: add root overwrite warning
    * twrp.fstab: add persist and remove extra tabs

    regards.