If you need TWRP that badly it will work, until then you will have to wait for a release for A12.
TWRP Flame [Official]
- Thread starter bigbiff
- Start date
Hi guys. We will be finally having a 12.1 release soon. I have been told it should decrypt a13 too. Can you guys test this on flame? https://build.twrp.me/test/flame/twrp-3.6.2-0-a12-flame.img
Boots for me on 13.0.0 (TP1A.220624.014, Aug 2022) but it doesn't respond to touches.
logcat: https://pastebin.com/cxq5Q9e9
recovery.log: https://pastebin.com/qV1ELYau
I don't think the kernel matters for booting twrp, but just in case it does, I'm using cleanslate 4.9.0 from https://forum.xda-developers.com/t/...vib-wrgrd-jun-8.4027435/page-34#post-87299665 patched with magisk 25.2.
Has anyone with 12.1 installed tried it yet? I am not sure we can support a13 yet.
I just tested it out on Lineage 19 (A12.1). I'm getting the same result . . . it boots but it doesn't respond to touches. Tried twice. Same result both times.
I didn't install, just opened with console (fastboot boot). Everything seems to be working fine for me. Responds to button presses, everything loaded. Here are the logs
Android 12 (https://dl.google.com/dl/android/aosp/flame-sq3a.220705.003.a1-factory-fdd77628.zip). have magisk 24.3. Before that, there was a recovery - https://download.pixelexperience.org/flame
I have been able to successfully boot my pixel 4 (flame) on android 13 with this test release for android 12. as mentioned by others, touch input doesn't work but if you plug a mouse into the phone the pointer will show up and the buttons are clickable.
I just need an installer zip file for this to flash now that I'm in twrp. i didn't see where that was posted.
**update**
it's been a while for me away from using android a couple years now. i remembered after my post above that twrp can flash img files to recovery ramdisk. so that's what I did, and rebooted to recovery, and it loads and touch works!!
Last edited:
OK, good to know. You could also put it into an older installer zip from twrp.me to install it. Does decryption work?
Hey @bigbiff, thanks for all the work on getting this going. I'm just trying to figure out if I have the right steps to do what I want to do.
Here's the steps as I've run them:
My goal was to use Superr's kitchen suite to modify a factory ROM and flash it. When I just
and try to install the .zip file, I get permission denied.
My understanding is that permission denied error is on my account of not being in fastbootd mode. When I'm in fastbootd mode, I can't boot the twrp image.
So my next attempt was to install TWRP permanently. (I am using the Kirisakuru kernel). After installing TWRP, my system _only_ boots to TWRP. It will never bring up the factory system image.
Trying to install my ROM zip from TWRP even when installed permanently gets the permission denied error.
Is there something I'm missing here to actually be able to flash something with dynamic partitions when I'm not in fastbootd mode?
Here's the steps as I've run them:
- Install factory image (flame-rq3a.211001.001) -- success
- Install Kirisakuru kernel (7.9.3) -- success
- fastboot boot trwp-3.6.2_11-0-flame.img -- success
- Install twrp (Install -> Install from image), and install the image I used to boot after copying to sdcard. I installed to both slots on the boot.img. -- success
- Install Kirisakuru kernel (7.9.3) again just to be safe -- success
- Reboot system to factory image -- failed
This actually ends up booting back to TWRP, never to the ROM
My goal was to use Superr's kitchen suite to modify a factory ROM and flash it. When I just
Code:
fastboot boot twrp-3.6.2_11-0-flame.imgMy understanding is that permission denied error is on my account of not being in fastbootd mode. When I'm in fastbootd mode, I can't boot the twrp image.
So my next attempt was to install TWRP permanently. (I am using the Kirisakuru kernel). After installing TWRP, my system _only_ boots to TWRP. It will never bring up the factory system image.
Trying to install my ROM zip from TWRP even when installed permanently gets the permission denied error.
Is there something I'm missing here to actually be able to flash something with dynamic partitions when I'm not in fastbootd mode?
Are you using Install Recovery Ramdisk to install the TWRP boot.img or flashing it to boot? You need to use Install Recovery Ramdisk for a11 based TWRP from twrp.me.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
36[RECOVERY] TWRP 3.5.0-0 - TeamWin Recovery Project
Introduction:
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance - http://gerrit.twrp.me
If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
flame Device Config: https://github.com/bigbiff/android_device_google_coral
DOWNLOAD:
Please go to https://twrp.me to download the device image.
A11 Testing:
- updated for lineage-18.1 booting
Old info:
- Credit to @Freak07 https://github.com/freak07/FLORAL - using his kernel as a Coral/Flame TWRP base
http://twrp.me9What to backup
* super
* data
* persist
* boot
* any other partition desired
What to restore
* super
* data
* boot - depending on ROM support
Please just restore persist if you have a failed partition. I do not recommend restoring backups from phone to phone unless you know what you are doing.
Repacking TWRP into Boot partition
To repack TWRP into the boot partition to override stock recovery when rebooting to recovery, perform the following steps
1. adb push <latest_boot.img> /sdcard/
2. reboot to bootloader and fastboot latest boot.img of TWRP
3. Go to Install
4. Touch Install Image
5. Select your boot.img from /sdcard
6. Swipe to confirm flash
7. Reboot to recovery and android to verify installation
TWRP won't Boot?
Make sure you have a kernel that supports the R DTBO and LZMA ramdisk starting with test5 such as https://forum.xda-developers.com/pi...nel-kirisakuraq-1-0-0-pixel-4-xl-aka-t39922137Hello, I was able to get repacking working, however you need to use a kernel with LZMA ramdisk support. I am using Kirisakura-FLORAL_5.2.2.zip for testing.
Also I am now using @Freak07 FLORAL kernel as a base for the fastboot image in order to support the newer DTBO image from R.
Please see the download in the FP. I will be working on fastbootd next when I cleanup my patchset for repacking at gerrit.twrp.me for merging into mainline android-10.06Here is an update for July firmware: July FW Date https://build.twrp.me/test/flame/twrp-3.4.0-0-test2-flame.img
It will also fix restoring of super partition.
