- Jul 21, 2017
My name in xda is Andropop and this is my work AVE1 SM-T225 A11 TWRP
Uses only Odin 》flash your Firmware A11 + userdata slot with my vbmeta_disabler_twrp.tarGuys help me
After installing twrp, I can not enter it. when I press pwr + vol up I get a black screen. it is possible to get out of it only with the combination pwr + vol down.
Tried to install on rooted and non-rooted firmware. TWRP in ODin is flashed without errors
nothing has changed: only after flashing your file, the firmware is no longer loaded.Uses only Odin 》flash your Firmware A11 + userdata slot with my vbmeta_disabler_twrp.tar
AFTER access TWRP look at installation guide of 1'st page. ( first time to access TWRP may founded blank page , try to press vol button.
checking status is normally.nothing has changed: only after flashing your file, the firmware is no longer loaded.
Maybe the problem is in "kg status: checking"?
yes of course I first get the root, and then I try to get twrp, but I can not enter it. Now I tried to boot into the system and enter the recovery via adb reboot recoverychecking status is normally.
Firmware not loaded but load twrp instread. boot into recovery mode.
you try yo press vol button during blank page or not?
press power button then vol button.
Note: TWRP installation required root ,you must patched-magisk AP file or patch "boot.img.lz4" + vbmeta.img.lz4" .
if you can't installed TWRP , use "FadtbootD".
try toyes of course I first get the root, and then I try to get twrp, but I can not enter it. Now I tried to boot into the system and enter the recovery via adb reboot recovery
But I got a black screen again, and I had to restart the tablet pwr + vol down
when TWRP for 220 A11 or A13 didn't work for you then FastbootD for GSIs.Hey guys I also am unfortunately getting the green line, black screen error on my newly purchased t220 and was seeing if someone can help. I actually got all of the steps to work on my t225 and am running BlissOS without issue, but wanted the black 4gb version as a daily driver.
-I have the original firmware file: T220XXU1AVE1_T220ODM1AVE3_INU and am able to patch the boot rom and boot fine to stock A11 with Magisk.
-From there if I boot into Download mode and use odin to flash 'udata_vbmata_disabler_twrp-220.tar' as UserDATA it will boot, come up with the "vbmeta, recovery, vbmeta" then it will ask to hit power button, then I get a green line and black screen.
-On the black screen, power+volume doesn't turn it on
-I have also tried the alternate guide given here where you load the stock firmware with magisk, then put the vbmeta_disabled_R.tar as AP which causes it to boot into recovery asking you to data reset. I have done that, done the data reset, then boot back into Download Mode and flash the TWRP under AP, but that also does the green line and black screen.
I currently am trying your suggestion of extracting the whole contents of the AP file, and tar'ing it back up. Then patching that whole AP.tar with Magisk, followed by flashing:
BL - stock BL
AP - patched AP file
CSC - CSC
Home - udata_vbmata_disabler_twrp-220.tar
I will report back with my findings
-Using the full AP file has the same black screen but now there is no green line, just a black screen. Still have to turn it off via Power + Volume Down
Was the file you posted called 'udata_vbmata_disabler_twrp-220.tar' suppose to be used with android 13 or 11?when TWRP for 220 A11 or A13 didn't work for you then FastbootD for GSIs.
I did all of that nd like i said i did this al on my t225 withut issue, i was just asking because on my t225 i used the original 3in1 and tried the t220 when i got this tablet, but since you said "a11 or a13" i just wanted to make sure i wasn't supose to be on a13 before flashing that.1. udata_vbmata_disabler_twrp-220.tar' is for A11 TWRP.
2. magisk-patch file ( boot+vbmeta) + patch-recovery which i call 3in1.tar was installed at USERDATA slot of Odin Together with AP, BL, CP, CSC.
please read my tutorial.
TWRP itself not supported touch screen , only uses OTG mouse. If you want to install GSI then go on with fastbootD ( patch stock recovery)@tom.android @HisokaRyodan Can you tell me the method to flash twrp in t225 successfully I flashed that 3 in one zip but facing screen touch issue can't even unlock twrp. If I can't unlock it then what's the use of it how can I flash anything or go in to advanced to type cmd given in first page
I try to connect mouse via USB OTG it's showing light on mouse but mouse not showing in twrp and not workingonly uses OTG mouse
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this Recovery * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Samsung wants me to request sources again?Warning! Do not update to OCT security.
Bootloader has changed, from U1 , if so ,you can't downgrad anymore.!
( Brick your tab if downgrade.)
Now. this update is on all samsung server. ota to your lock bootloader for auto update.
Don't make your CustomAP file with T225XXS1BVI2.
Nice, it's good to see someone owning the device developing for it, I was mostly "blindly" doing stuff and then asking Skorpion to test them.Booted With just a minimal fix And Touch working