[TWRP][JOAN][V30/V30+/V30S][UNOFFICIAL] 3.2.3-7 Oreo final

seadersn · Oct 10, 2018

Hi!

!!! First things first: big phat huge !!!THANKS!!! to the full TeamWin Team, SGCMarkus (initial twrp tree), Phoenix591 (for inspiration), Dees Troy (for his trees), z31s1g for his brilliant theme and Captain Throwback (inspiration, too) !!!

For Pie ROMs you should use 3.3.1 recovery, either OrangeFox (based on TWRP with many very useful additions, with Magisk module manager being only one of it :good: ), or good old TWRP itself. 3.3.1 needed for decryption of pie ROMs!

Feature list:
- capable of installing treble and/or vendorized ROMs
- Possibility to leave out lockscreen settings when restoring a backup (sometimes you have to delete them manually, otherwise no login into your restored ROM possible -.- You can bypass this with this. Note: lockscreensettings are independent from your encryption settings)
- Time and date is showed correctly, independent of /data
- some extra partitions (see below)
- Oreo 3.2.3-7: compiled with (modified) 8.1 TWRP branch
- Oreo recovery: Decryption of AOSP up to 8.1 and stock ROMs userdata is working (cherrypicked stuff for bringing that up), so, with this recovery, the urgent need for flashing no-verity-opt-encrypt zip isn't there anymore

Pie is not decryptable for the moment, neither with old Oreo recovery nor with newer PIe recovery: this is being worked on. Encryption changed in Pie, this needs some extra "love"
- everything working: backup, restore, decryption, time, mtp, adb, installing of treble or vendorized builds, themeable, .........
- modem image support: backup, restore, flashing of modem images either taken directly from kdz or via diskdump (this already was available but then broken at some point of time, sry for that!

).
- Same for OP image

Don't forget your timezone settings after flashing. Also there are some extra partitions you can mount/backup/flash/explore, like LAF, persist-LG and OP configs. There's the thought of some people to flash TWRP as a second copy to LAF partition to be on the sure side when it comes to ROM switching or sth like that. You can do this, anyway it's not really recommended (by me and some others) because you'll lose download mode, but you now have the option.
Also, if you want to restore an older backup, don't restore 'firmware' from it!!! This will break your WLAN, at least, and you have to flash a modem.img to get it back working.

For extra partitions: Some of them are needed for decryption (modem / persist-lg (drm)), some are for VoLTE (OP), time is stored on /persist/time (and /data/vendor/time), modem should be known and the LAF partition should be known already (described above).

For decryption: it works as it should. Therefore it is a little bit tricky to restore a ROM which has encrypted userdata, when you'd installed any other ROM in between. or formatted data There are some points to remember when restoring, a little guide is available in 3rd post, and some tipps too.

Some instructions:
How to flash?
If starting fresh with an unmodified phone, this thread should help you installing it
When you already have TWRP installed, you can flash this recovery from within TWRP:
- Tap "Install"
- Tap "Install image" button, located down right
- Locate your downloaded image and select it
- Select "recovery" from the list which shows up then
- Install; and reboot to recovery after installing immediately, don't use it for any other tasks until rebooted pls, as it may not function. Things can go bollox when phone wasn't rebooted to recovery after installing.
And of course you can flash it via fastbootmode. Reboot to bootloader (adb reboot bootloader; when magisk is installed, you can use magisk manager => module => menu on the top right => reboot to bootloader. You can reboot to recovery from there too) and then:
fastboot flash recovery <twrp-image-name.img>

When you experience errors or sth isn't working as it should in your opinion:
When an error occurs, pls supply me a log from TWRP, taken immediately after the error showed up. You can use the "Copy to SDCard" option (advanced options) in TWRP for this. Grab this file then and upload its content to pastebin.org.
I can't help without as much detailed info as you can supply. This should include at least following information: phone model, used TWRP image (exact name of image), task you wanted to do (which ROM e.g.).

There's now an optional version of TWRP available, which contains the inclusion of internal storage in data backups (IntSD version). Exclusions (folders which won't be backed up): TWRP, Movies, Music and Download folders. These won't be included in backups, as they can be really big.
With the recovery including internal storage you can backup to internal and external storage, no matter. The data_image recovery can backup its data image to external sd only, of course.

If you want to use data_image, system_image or internal storage included in data backup, first check your filesystem on your external sdcard. It needs to be capable of writing big files, which isn't the case with fat/fat16/fat32. You need exFAT (for stock) or ext4/ntfs (only available with custom kernel and/or AOSP based builds).

DOWNLOADS:

Oreo and Pie capable 3.2.3-7 TWRP:
Download links (always the latest and newest only; one version for all):
File name: TWRP-3.2.3-7-DataIMG.img (default)
MD5sum: aac1525f9bd85d6efbc0fb65bda4a904
MAIN Download: AndroidFileHost - TWRP-3.2.3-7-DataIMG latest
File name: TWRP-3.2.3-7-IntSD.img (non-default, includes main part of internal storage in data backup)
MD5sum: 23113ad33772a5f783dcabd09fa97ebb
MAIN Download: AndroidFileHost - TWRP-3.2.3-7-IntSD latest

Some additional words to different versions;
I personally use internal w/ sdcard backup, all my pics and almost everything possible app related on my phone is on external SDcard. Some data always remains on intSD (e.g. whatsapp, the Android folder which contains settings and app data too, k-9 mail folder and others), this needs to be in a backup for me. This is, what the intSD version does: but it leaves out the big folders (download, music, movie and TWRP).

As always: Use it at your own risk! You are the one who changes stuff on your phone, I'm not responsible for anything which happens to your phone. TWRP is powerful, be careful at what you do with it :good: And it just works.

All you need to compile this yourself:
[url]https://github.com/seader/android_device_lge_joan-twrp[/url]
[url]https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni[/url]
[url]https://github.com/seader/android_kernel_lge_msm8998[/url] (not really needed as a prebuilt kernel is used)
[url]https://github.com/seader/bootable_recovery-twrp[/url] (copy of twrp recovery with encryption cherrypicks and the stuff added. encrypt-8.1 branch = intSD version, master branch = DataIMG version)

seadersn · Oct 10, 2018

Features:
- Treblelized / vendorized: one recovery for all
- Time and date working, getting this from persist partition
- decryption working for both stock and AOSP up to 8.1; Pie is being worked on [break atm

]
- additional partitions available
- "data_image" (default) and "internalSD included" (non-default) available
- Checkbox for leaving out lockscreensettings when restoring data partition (available in main settings and restore settings; in supported themes in main settings only!)
- TWRP app removed

Changelog:

21. April 2019, TWRP 3.3.0-00, new Pie recovery:
- Newest sources used, pie branches everywhere
- tiny menu structure overhaul
- almost all the stuff from Oreo recovery back in, except:
-- decryption
-- data image function
-- inclusion of internal sdcard in backups
-- everything else is working and included (special partitions, time and date working, all the default functions working, exclusion of lockscreen settings when restoring, TWRP su and app removed)

08. Dec. 2018, TWRP 3.2.3-7, old Oreo recovery:
- OP image flashing function added
- Sources update

Older:

How to (re)boot to TWRP?:
If your phone is rooted:
- Magisk has options to reboot to different targets like bootloader or recovery, but this menu is a little bit hidden: you can access it by starting Magisk.Manager, going to the "Module" menu, tapping on the three dot menu on the top right. Then select your target
- If a terminal emulator is installed, open it, type "su" followed by enter and type "reboot recovery"
- You can do the same with an adb shell, open a shell and type the commands from above, they're the same
- There also are apps for rebooting to recovery or other targets. Just search around in PlayStore
- The good old "button dance"

When phone is powered off, press the volume down key and power button at the same time. When a first sign of life is seen on display, immediately release the power button, but just to instantly press it again. A menu will show, which wants you to do a factory reset: do it

You have to confirm this two times, and afterwards TWRP will boot without performing a factory reset. TWRP is compiled with a flag which recognizes this procedure and hinders the bootloader to pass the command for factory resetting.

seadersn · Oct 10, 2018

Some additional infos:

- vendor partition: it's there for everyone (no more present in TWRP 3.3!). It is flagged as removable, so it can be leaved in fstab without producing errors. Ppl w/o a vendor partition (which you need to create via script when you want to flash treblelized AOSP builds) shouldn't let themselves get confused about that, it's an additional entry like external sdcard or USB OTG.
- kdzwriter: still untested (and no more present in 3.2, in 3.3 it never was), respectively tested with 21h kdz, which told me "not applicable for this device". I for know mark this as non-working. I'll leave it in this recovery, for future updates and other testers with other kdz file (no more inside).
- data image backup: chose SDCARD for backup location, and enable compression

~~otherwise it's an ~55gb image lol.~~ (<= it IS an 55gb image, no matter of compression. Compression doesn't work for images! So prepare for a huuuge file, and think about your filesystem on sdcard (can it handle big files? For AOSP you can chose ext4 or exfat, for stock exfat only)). This option includes internal sdcard, which is in /data/media. This can be used to do a real full backup with absolutely everything needed (incl. /sdcard/Android folder, your music, vids or anything else e.g.).
- time: when it goes wrong again, just delete the /persist/time folder from within recovery, boot up android and reboot to recovery. Should be "fixed" now. This folder isn't present in 3.3: here you can try to delete "/persist/.twrps" file (you need to re-setup TWRPs settings then) and the folder "/data/vendor/time", followed by a reboot to ROM and then to recovery again. May ned one or two reboots more to ROM or TWRP to get TWRP recognize the time correctly.

Encryption:

There's something you need to remember when restoring encrypted backups, after you have flashed another ROM (which differs from the one to restore): your secure startup settings. Write them down or have them in mind, you need it. Steps for restoring an stock or AOSP data partition encrypted backup:
- format data
- first restore your ROM only partially, means only boot and system (and only that)
- boot into your ROM you've restored
- go through the setup manager and afterwards hop into security and encryption settings
- encrypt your phone exactly the same way it was in your backup you want to restore encrypted userdata from; for 3.3 recovery it's only needed to set up any encryption config, you can put in what you want for yourpin / pattern / passwd
- if it is encrypted already, you only have to redo security settings. Use the same settings as in the backup, means pin/pattern/pw need to be the same *and* secure startup too, if you've chosen it before (see above for pie and 3.3 recovery: you can use anything. Youcan try this with oreo too, maybe it works too)
- reboot to recovery again and restore your encrypted data partition (from the backup you've already restored system and boot from)
- now you're good to go

You should tick "Don't restore lockscreen settings" for leaving out the lockscreen.db* files. Otherwise you have to delete them manually to be able to get into your ROM, because lockscreen settings will prevent it. Lockscreen settings btw. are independent of encryption settings. It's the same pattern/pin/pw used, but another building site.

If you want to encrypt your AOSP ROMs userdata (only possible if you are on android up to 8.1), you can use the attached fstab file (it's for LOS 15.1 non treble), either as an example or to overwrite the existing one. Have a look at the line which contains "userdata". The fstab file is located in /system/vendor/etc/. Unzip the attachment (it is no flashable zip), put it in the correct location and overwrite the original file. Reboot your phone, then go into security settings, you should now be able to encrypt it.

This TWRP can't handle decryption of AOSP 9.0 encrypted data atm, you need 3.3 TWRP for that. There changed something from 8.1 to 9.0 which means the new stuff needed new recovery, which is included with 3.3 recovery.

Additional stuff:
- Recommended theme (original thread): [THEME][TWRP] TWRP Materialised - Black / Dark / Light / Play [27/01/18]

Edited versions of this theme, with menu entries added:
Black and Dark theme versions available here. There are two version of each: one showing "incl. internal" and one without, both have the lockscreen settings exclusion checkbox included. You'll now find this menu entry in main settings page only, it was there before too, but there was an additional entry when restoring a backup. This is gone in this theme as it didn't fit the way I wanted it to fit

Pick the one you need.

Included storage: version for recovery "IntSD"
Without storage: version for recovery "DataIMG"

black metallic · Oct 10, 2018

can i just update it by flashing it in the twrp 3.2.1-02 treble as img?

BROKEN1981 · Oct 10, 2018

seadersn said:
reserved #2

What's the difference between the AFH file and Mega file?

Sent from my LG-H932 using XDA Labs

SGCMarkus · Oct 10, 2018

black metallic said:
can i just update it by flashing it in the twrp 3.2.1-02 treble as img?

yes, and then reboot to recovery again
TWRP can simply be updated that way.

BROKEN1981 said:
What's the difference between the AFH file and Mega file?

Sent from my LG-H932 using XDA Labs

Im 99.9% sure thats a mirror, incase AFH is slow again.

BROKEN1981 · Oct 10, 2018

SGCMarkus said:
yes, and then reboot to recovery again
TWRP can simply be updated that way.

Im 99.9% sure thats a mirror, incase AFH is slow again.

I figured as much. I had a night that AFH wanted 3 hours to download TWRP. A Google speed test gave me 78mbps.

So yeah, seems Mega is the way to go

Sent from my LG-H932 using XDA Labs

joarce · Oct 10, 2018

First, thanks for this. Second, what's the difference b/w the earlier "tfp" img and this "tfp-kdz" img?

Ballroomblitz · Oct 10, 2018

joarce said:
First, thanks for this. Second, what's the difference b/w the earlier "tfp" img and this "tfp-kdz" img?

Stated in op. This image allows for writing of some stuff from kdz files.

Sent from my LG-US998 using Tapatalk

seadersn · Oct 10, 2018

jip, thx

black metallic · Oct 10, 2018

SGCMarkus said:
yes, and then reboot to recovery again
TWRP can simply be updated that way.

Im 99.9% sure thats a mirror, incase AFH is slow again.

cool, can i still use treble and wipe tge vendor?

Krekos/CZ/ · Oct 10, 2018

I don't know if I understand it correctly. Pls correct me If I'm wrong.

The benefit of KDZ Writer is that we can update system from KDZ in TWRP.

Mrxyzl · Oct 10, 2018

Thanks will try this

wireeater · Oct 10, 2018

Running it now (H932). Thank you.

ChazzMatt · Oct 10, 2018

seadersn said:
So, here it is: a new (the third for v30...?) thread for an already existing recovery.

Actually the 4th, but thank you!

First one was "H930" (which confused US998 users when they got bootloader unlock and root), 2nd one was for "US998" to counteract the H930 confusion -- but really should have been "V30" or "JOAN". @SGCMarkus then made one which not only was Oreo compatible but was "unified". Now this is 4th.

The unification thing is important. I saw over in Moto Quark threads (Droid Turbo, Moto Maxx, Moto Turbo -- all the same phone) where one initial forum was split into two because Droid Turbo at first didn't have bootloader unlock and root, the OTHER Quarks (Moto Maxx, Moto Turbo) jumped ahead in development. Then a year later when Droid Turbo got bootloader unlock and root, thanks to Sunshine, the CM dev at the time generously modified his kernel to include Droid Turbo (which was in a different "dead" forum by then). Thus all the Quarks were unified in development and could all run the same ROMs, same TWRP.

Whereas with one LG flagship phone (which I can't find right now), starting having split development. TWRP and dedicated ROMs for European (which again got bootloader unlock first, thanks to LG's mysterious ways) but then separate older TWRP and a few ROMs for the North America open market. Maybe that's improved now, which is why I can't find it, but I remember thinking "that's not right" and I didn't want that to happen to the V30.

FcBayernMinga · Oct 10, 2018

Is the vendor partition mountable ?

Are trebleized ROMs flashable ?

XCaliburX · Oct 10, 2018

Thanks for providing the new, current version of TWRP. V30 really needed an update for this. No more incorrect times/dates and Magisk giving an error due to false time/date.

gimpy1 · Oct 10, 2018

Can you give a quick "dummies " tutorial on how to replace the old twrp with this new version using twrp?

Thx.

Ballroomblitz · Oct 10, 2018

gimpy1 said:
Can you give a quick "dummies " tutorial on how to replace the old twrp with this new version using twrp?

Thx.

I put the new image on sd card. Booted to current TWRP. Flashed new image to recovery partition. Rebooted to system.
Mine took a few reboots to settle in. Couldn't get to it using reboot manager app. Was getting ready to do button dance, but tried reboot app one more time and it booted me to new TWRP. Everything's great now. I don't know if you're supposed to boot back to recovery after flashing the new image. That's what I didn't do.

Sent from my LG-US998 using Tapatalk

seadersn · Oct 10, 2018

Krekos/CZ/ said:
I don't know if I understand it correctly. Pls correct me If I'm wrong.

The benefit of KDZ Writer is that we can update system from KDZ in TWRP.

jep, that's the intention of this tool. have a look at the pic in first post

there's more to flash via kdzwriter.

FcBayernMinga said:
Is the vendor partition mountable ?

Are trebleized ROMs flashable ?

comes this evening, i need a bit of time for relaxing now, but i don't get it because of kids xD

Ballroomblitz said:
... I don't know if you're supposed to boot back to recovery after flashing the new image. That's what I didn't do.

Sent from my LG-US998 using Tapatalk

jep, this is needed! after flashing of new recovery reboot to recovery. :good:

[TWRP][JOAN][V30/V30+/V30S][UNOFFICIAL] 3.2.3-7 Oreo final

Recognized Developer

Recognized Developer

Recognized Developer

Attachments

Senior Member

Senior Member

Recognized Developer

Senior Member

Senior Member

Senior Member

Recognized Developer

Senior Member

Member

Senior Member

Senior Member

Recognized Contributor

Senior Member

Senior Member

Senior Member

Senior Member

Recognized Developer

Similar threads

Top Liked Posts