• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[TWRP OFFICIAL] [3.2.1-0] c9ltechn/SM-C9000 Galaxy C9 Pro

Search This thread

travis82

Senior Member
Jan 8, 2011
1,524
1,690
38
Marysville, Washington
TWRP for C9LTECHN/SM-C9000 Galaxy C9 Pro

Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)

PLEASE BEFORE YOU FLASH ROMS MAKE A COMPLETE BACKUP OF YOUR SYSTEM INCLUDING EFS SO YOU DO NOT BRICK YOUR MOBILE

WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.

How to intall TWRP using ODIN
1) Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.
2) Go back to the main Settings page, scroll to bottom and select“Developer options” from there.
3) Under Developer options, look for “Enable OEM unlock”checkbox/toggle and make sure you Check it or turn it ON.
4) Now Boot your Samsung Android device into Download mode.To Do So Follow the steps below
5) Switch off your device.
6) Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
Once your device is in download mode, connect it to the PC with a USB cable. The Odin will automatically detect the device and show an “Added!!” message. If not then your device is not connected properly
7) Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
8) Click the Start button on Odin to start Flashing and wait for it to finish the process.
Once it finished successfully, a pass message on the Odin screen will pop up
Your device will automatically reboot when Odin is done flashing. Now You can disconnect your device.
Done!!! TWRP is now installed on your device
NOTE: YOU MAY HAVE TO UNCHECK AUTO REBOOT IN THE OPTIONS TAB IN ODIN

TWRP source code: https://github.com/TeamWin
Source code device tree: https://github.com/travismills82/twrp_android_device_samsung_c9ltechn https://github.com/TeamWin/android_device_samsung_c9ltechn/
TWRP Nougat Download: https://www.androidfilehost.com/?fid=889964283620775437
TWRP Oreo Download: https://www.androidfilehost.com/?fid=1322778262903985796
no-verity-no-encrypt: https://www.androidfilehost.com/?fid=745425885120752506

ROOT OPTIONS:
SuperSU: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

Contributors @travis82 @k2wl @deadman96385
 
Last edited:

Flavio

Senior Member
Ok, I formatted Data twice in TWRP. Mounting Data works.
I flashed SuperSU in TWRP. Mounting Data works.
I flashed no_verity. Mounting Data works.
I rebooted into TWRP. Mounting Data works.
I rebooted into system and then switched off and rebooted into TWRP. Mounting Data does not work.

What am I doing wrong?

Correction:
I have now used this no-verity-no-encrypt_ashyx file:
https://www.androidfilehost.com/?fid=24591000424951049
And now Data stays decrypted!
 
Last edited:

aftermath85

Senior Member
May 24, 2013
309
88
Manila
I do have a stock debloated rom that is made out of HK firmware if this community is interested, I can put it up. All I see is you guys using Aurora. Anyone interested or do you all want to stick to Aurora rom?

I am interested, currently I just using the package disabler to disable all bloat samsung app..
do you have flashable s8 systemui for c9pro.. thanks
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    TWRP for C9LTECHN/SM-C9000 Galaxy C9 Pro

    Special Notes:
    1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
    2. KNOX will be tripped once you flashed custom binaries to your phone.
    (Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
    3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
    (You can flash custom ROMs if you want to keep the OS up-to-date.)

    PLEASE BEFORE YOU FLASH ROMS MAKE A COMPLETE BACKUP OF YOUR SYSTEM INCLUDING EFS SO YOU DO NOT BRICK YOUR MOBILE

    WHAT IS TWRP?
    Team Win Recovery Project is a custom recovery for Android devices.
    It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.

    How to intall TWRP using ODIN
    1) Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.
    2) Go back to the main Settings page, scroll to bottom and select“Developer options” from there.
    3) Under Developer options, look for “Enable OEM unlock”checkbox/toggle and make sure you Check it or turn it ON.
    4) Now Boot your Samsung Android device into Download mode.To Do So Follow the steps below
    5) Switch off your device.
    6) Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
    Press Volume Up on the warning screen to accept it and boot into Download mode.
    Once your device is in download mode, connect it to the PC with a USB cable. The Odin will automatically detect the device and show an “Added!!” message. If not then your device is not connected properly
    7) Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
    8) Click the Start button on Odin to start Flashing and wait for it to finish the process.
    Once it finished successfully, a pass message on the Odin screen will pop up
    Your device will automatically reboot when Odin is done flashing. Now You can disconnect your device.
    Done!!! TWRP is now installed on your device
    NOTE: YOU MAY HAVE TO UNCHECK AUTO REBOOT IN THE OPTIONS TAB IN ODIN

    TWRP source code: https://github.com/TeamWin
    Source code device tree: https://github.com/travismills82/twrp_android_device_samsung_c9ltechn https://github.com/TeamWin/android_device_samsung_c9ltechn/
    TWRP Nougat Download: https://www.androidfilehost.com/?fid=889964283620775437
    TWRP Oreo Download: https://www.androidfilehost.com/?fid=1322778262903985796
    no-verity-no-encrypt: https://www.androidfilehost.com/?fid=745425885120752506

    ROOT OPTIONS:
    SuperSU: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
    Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

    Contributors @travis82 @k2wl @deadman96385
    4
    For anyone having a problem with Rooting N/O, follow those steps:

    -Install CROM apk to allow custom binary (twrp/root/ROMs), apk here
    -Enable "OEM unlock" under development options, on O that option was removed so make sure to Enable it on N before updating to O
    -Flash latest TWRP build, from Here
    -Install latest Magisk Beta 17.2, Zip here

    Now root should enabled on your current ROM, if you want to remove Encryption from internal storage follow those steps:

    -Backup your Data, all of it!!
    -Boot to TWRP, go to Wipe, then Format Data, then Type "yes" to format your device
    -Flash this Zip, to prevent system from getting Encrypted again
    -Boot back to System, and Enjoy!!
    4
    3
    I do have a stock debloated rom that is made out of HK firmware if this community is interested, I can put it up. All I see is you guys using Aurora. Anyone interested or do you all want to stick to Aurora rom?