General [TWRP] [ORANGEFOX] [UNOFFICIAL] [ROSEMARY] [BETA] TWRP 3.5.2 and TWRP 3.6+ for Xiaomi Redmi Note 10s

Search This thread

miravision

Senior Member
Oct 5, 2021
285
183
WARNING: THIS IS EXPERIMENTAL BETA MEANT FOR DEVELOPERS AND TESTERS NOT AS DAILY DRIVER

Caution: Android 11 builds are incompatible with Android 12. Beware!

Credits:

@Woomymy
@J6idot
@mastersenpai05
@myst33d
https://github.com/notmyst33d

Developers WoomyMy, J6idot , mastersenpai05 and Myst33d have helped develop an unofficial TWRP for rosemary - xiaomi redmi note 10s

Installation Video:


Code:
https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file

http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file


Since this is not yet official, only proceed if you are competent enough and brave.

(If you need instructions on how to flash, please do not flash this with fastboot method)

Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.

TWRP 3.6+ Development Build status, fixes, bugs and downloads: [here]


TWRP -3.6.2_11-2

NameModified
TWRP-3.6.2_11-208/03/2022

Changelog
  • Fix brightness when max brightness is 255
  • Render GUI at 60FPS
  • Reposition statusbar icons and remove top offset
  • A lot of code cleanup
  • Update TWRP sources
  • DONT INSTALL THIS ON MIUI 13
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
This device DOES NOT support fastboot boot twrp.img
  1. Reboot your phone into fastboot mode
  2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
  3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
  4. Reboot into recovery mode (fastboot reboot recovery)
  5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
  6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
  7. Reboot and enjoy!
With custom recovery
  1. Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
Android 11 Roms: YES
Android 12 Roms: NO







TWRP-3.6.2_12-rc1

NameModified
TWRP-3.6.2_12-rc108/04/2022

Changelog
  • Sync TWRP sources
  • Add support for Android 12 decryption
  • Fix booting on MIUI13
  • DONT INSTALL THIS ON MIUI 12.5
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
This device DOES NOT support fastboot boot twrp.img
  1. Reboot your phone into fastboot mode
  2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
  3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
  4. Reboot into recovery mode (fastboot reboot recovery)
  5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
  6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
  7. Reboot and enjoy!
With custom recovery
  1. Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
MIUI 13 vendors: COMPATIBLE
MIUI 12 vendors:
  • A11 GSI / MIUI 12 system: FULLY INCOMPATIBLE
  • A12 GSI: COMPATIBLE, but you CAN NOT flash the boot.img, you need to flash the UPDATE ZIP using a custom recovery / Magisk







OrangeFox-R11.1_1-Unofficial

NameModified
OrangeFox-R11.1_1-Unofficial07/01/2022

Changelog
  • Fix brightness when max brightness is 255
  • Render GUI at 60FPS
  • Reposition statusbar icons and remove top offset
  • A lot of code cleanup
  • Update OrangeFox sources
  • DONT INSTALL THIS ON MIUI 13
  • Update Magisk OrangeFox addon to v25.2
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
This device DOES NOT support fastboot boot twrp.img
  1. Reboot your phone into fastboot mode
  2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
  3. Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
  4. Reboot into recovery mode (fastboot reboot recovery)
  5. When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
  6. Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
  7. Reboot and enjoy!
  8. To get Fox addons working, you need to reflash OrangeFox .zip file
With custom recovery
  1. Download OrangeFox .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
Android 11 Roms: YES
Android 12 Roms: NO









Older versions:

NameModified
Beta-07-11-30-202112/17/2021

🗞 Changelog
  • Sync TWRP sources (Version number updated to 3.6.0)
  • Symlink /dev/block/bootdevice -> /dev/block/platform/bootdevice (required by some scripts like OrangeFox installer)
  • Allow flashing VBMeta
  • Disable "Reflash TWRP after flashing ROM". (Causes AVB problem when installing MIUI, can still be done manually)
  • Build ZIP TWRP installer
  • Publish build logs for more transparency
🐛 Known bugs
  • Mounting Adopted storage
  • Vibrator

NameModified
RC-01-01-09-20221/9/2022

🗞 Changelog
  • Fix Bootctrl
  • Fix vibrator
🐛 Known bugs
  • Mounting Adopted storage

TWRP Version 3.6.1_11-1​


NameModified
TWRP-3.6.1_11-13/13/2022

🗞 Changelog
  • Fix BootCTRL
  • Update TWRP sources
  • Fix vibrator
  • Enable DT2W in recovery

Install instructions​

Without TWRP/OrangeFox​

Note: You need a copy of your ROM boot.img
This device DOES NOT support fastboot boot twrp.img
  1. Reboot your phone into fastboot mode
  2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
  3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
  4. Reboot into recovery mode (fastboot reboot recovery)
  5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
  6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
  7. Reboot and enjoy!

With TWRP/OrangeFox​

  1. Download TWRP .ZIP installer and flash in recovery

TWRP Version 3.6.2_11-1​


NameModified
TWRP-3.6.2_11-16/14/2022

🗞 Changelog
  • Sync TWRP sources

Orangefox Recovery Version R11.1_1-Beta​


NameModified
OrangeFox-R11.1_1-Beta3/13/2022

🗞 Changelog
  • Fix BootCTRL
  • Update OrangeFox sources
  • Fix vibrator
  • Enable DT2W in recovery
  • Update Magisk OrangeFox addon to 24.2

Install instructions​

Without TWRP/OrangeFox​

Note: You need a copy of your ROM boot.img
This device DOES NOT support fastboot boot twrp.img
  1. Reboot your phone into fastboot mode
  2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
  3. Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
  4. Reboot into recovery mode (fastboot reboot recovery)
  5. When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
  6. Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
  7. Reboot and enjoy!
  8. To get Fox addons working, you need to reflash OrangeFox .zip file

With TWRP/OrangeFox​

  1. Download OrangeFox .ZIP installer and flash in recovery

 

Attachments

  • vbmeta.zip
    206 bytes · Views: 860
Last edited:

murigny64

Senior Member
Apr 17, 2012
742
374
REIMS
Nice, it's beta 2
to apply encrypt patch, you must decrypt first.
So
- you have to disable security password/fingerprint in your parameter first.
- then reboot in recovery
- format data
- reboot again to recovery and apply patch.
 
  • Like
Reactions: m749 and Yangasto

murigny64

Senior Member
Apr 17, 2012
742
374
REIMS
test (beta 2) after disabling security (fingerprint and pin)

- flashing magisk.zip -> ok
- backup -> ok
- restore -> ok
- MTP internal SD -> ok
- MTP external SD -> nok, file manager stuck on it (win10 or linux mint)
 
  • Like
Reactions: m749 and miravision

J6idot

Senior Member
Developer WoomyMy has released an unofficial TWRP for rosemary - xiaomi redmi note 10s

Installation Video:


Code:
https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file

http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file

Since this is not yet official, only proceed if you are competent enough and brave.

(If you need instructions on how to flash, please do not flash this with fastboot method)

Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.
I'm sorry but, do you atleast have the permission to share this?
Also, WommyMy should be the guy to upload it, not you.

Edit: thanks for fixing the thread

Also you're missing the device tree.
 
Last edited:
Hello. As one of the developpers of this TWRP DT, I am not really OK with that.

Firstly, you linked the wrong device tree Real link here

Also, I didn't published this on XDA because this TWRP is still in BETA. And it contains major bugs, like flashing dynamic partitions in fastbootd. Even if bugs will me fixed, I was planning to wait a release candidate before publishing the release here (this will require even more testing, if people want to help us testing, this will be even better).

So please, can you delete this or add clear warnings about the beta state?

Regards, Woomy
 

woody4165

Senior Member
Nov 30, 2011
258
37
Rome
Xiaomi Poco F1
Xiaomi Poco X3 NFC
Hi and thanks for sharing

Is it possible just to boot from TWRP recovery via Fastboot without flashing it on the phone?

I have also a Poco X3 NFC with stock MIUI 12.5 with Magisk root, but with stock recovery (so I can do all OTA updates) where I'm doing the same.

When I need it, I just do
fastboot boot TWRP-file.img

Thanks
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    @miravision I think we should also add credits to people like @J6idot , @mastersenpai05 and Myst33d who did a great job helping building twrp.
    6
    Hello. As one of the developpers of this TWRP DT, I am not really OK with that.

    Firstly, you linked the wrong device tree Real link here

    Also, I didn't published this on XDA because this TWRP is still in BETA. And it contains major bugs, like flashing dynamic partitions in fastbootd. Even if bugs will me fixed, I was planning to wait a release candidate before publishing the release here (this will require even more testing, if people want to help us testing, this will be even better).

    So please, can you delete this or add clear warnings about the beta state?

    Regards, Woomy
    5
    WARNING: THIS IS EXPERIMENTAL BETA MEANT FOR DEVELOPERS AND TESTERS NOT AS DAILY DRIVER

    Caution: Android 11 builds are incompatible with Android 12. Beware!

    Credits:

    @Woomymy
    @J6idot
    @mastersenpai05
    @myst33d
    https://github.com/notmyst33d

    Developers WoomyMy, J6idot , mastersenpai05 and Myst33d have helped develop an unofficial TWRP for rosemary - xiaomi redmi note 10s

    Installation Video:


    Code:
    https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file
    
    http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file


    Since this is not yet official, only proceed if you are competent enough and brave.

    (If you need instructions on how to flash, please do not flash this with fastboot method)

    Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.

    TWRP 3.6+ Development Build status, fixes, bugs and downloads: [here]


    TWRP -3.6.2_11-2

    NameModified
    TWRP-3.6.2_11-208/03/2022

    Changelog
    • Fix brightness when max brightness is 255
    • Render GUI at 60FPS
    • Reposition statusbar icons and remove top offset
    • A lot of code cleanup
    • Update TWRP sources
    • DONT INSTALL THIS ON MIUI 13
    Install instructions
    Without TWRP/OrangeFox
    Note: You need a copy of your ROM boot.img
    This device DOES NOT support fastboot boot twrp.img
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
    7. Reboot and enjoy!
    With custom recovery
    1. Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
    Compatibility
    Android 11 Roms: YES
    Android 12 Roms: NO







    TWRP-3.6.2_12-rc1

    NameModified
    TWRP-3.6.2_12-rc108/04/2022

    Changelog
    • Sync TWRP sources
    • Add support for Android 12 decryption
    • Fix booting on MIUI13
    • DONT INSTALL THIS ON MIUI 12.5
    Install instructions
    Without TWRP/OrangeFox
    Note: You need a copy of your ROM boot.img
    This device DOES NOT support fastboot boot twrp.img
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
    7. Reboot and enjoy!
    With custom recovery
    1. Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
    Compatibility
    MIUI 13 vendors: COMPATIBLE
    MIUI 12 vendors:
    • A11 GSI / MIUI 12 system: FULLY INCOMPATIBLE
    • A12 GSI: COMPATIBLE, but you CAN NOT flash the boot.img, you need to flash the UPDATE ZIP using a custom recovery / Magisk







    OrangeFox-R11.1_1-Unofficial

    NameModified
    OrangeFox-R11.1_1-Unofficial07/01/2022

    Changelog
    • Fix brightness when max brightness is 255
    • Render GUI at 60FPS
    • Reposition statusbar icons and remove top offset
    • A lot of code cleanup
    • Update OrangeFox sources
    • DONT INSTALL THIS ON MIUI 13
    • Update Magisk OrangeFox addon to v25.2
    Install instructions
    Without TWRP/OrangeFox
    Note: You need a copy of your ROM boot.img
    This device DOES NOT support fastboot boot twrp.img
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
    7. Reboot and enjoy!
    8. To get Fox addons working, you need to reflash OrangeFox .zip file
    With custom recovery
    1. Download OrangeFox .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
    Compatibility
    Android 11 Roms: YES
    Android 12 Roms: NO









    Older versions:

    NameModified
    Beta-07-11-30-202112/17/2021

    🗞 Changelog
    • Sync TWRP sources (Version number updated to 3.6.0)
    • Symlink /dev/block/bootdevice -> /dev/block/platform/bootdevice (required by some scripts like OrangeFox installer)
    • Allow flashing VBMeta
    • Disable "Reflash TWRP after flashing ROM". (Causes AVB problem when installing MIUI, can still be done manually)
    • Build ZIP TWRP installer
    • Publish build logs for more transparency
    🐛 Known bugs
    • Mounting Adopted storage
    • Vibrator

    NameModified
    RC-01-01-09-20221/9/2022

    🗞 Changelog
    • Fix Bootctrl
    • Fix vibrator
    🐛 Known bugs
    • Mounting Adopted storage

    TWRP Version 3.6.1_11-1​


    NameModified
    TWRP-3.6.1_11-13/13/2022

    🗞 Changelog
    • Fix BootCTRL
    • Update TWRP sources
    • Fix vibrator
    • Enable DT2W in recovery

    Install instructions​

    Without TWRP/OrangeFox​

    Note: You need a copy of your ROM boot.img
    This device DOES NOT support fastboot boot twrp.img
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
    7. Reboot and enjoy!

    With TWRP/OrangeFox​

    1. Download TWRP .ZIP installer and flash in recovery

    TWRP Version 3.6.2_11-1​


    NameModified
    TWRP-3.6.2_11-16/14/2022

    🗞 Changelog
    • Sync TWRP sources

    Orangefox Recovery Version R11.1_1-Beta​


    NameModified
    OrangeFox-R11.1_1-Beta3/13/2022

    🗞 Changelog
    • Fix BootCTRL
    • Update OrangeFox sources
    • Fix vibrator
    • Enable DT2W in recovery
    • Update Magisk OrangeFox addon to 24.2

    Install instructions​

    Without TWRP/OrangeFox​

    Note: You need a copy of your ROM boot.img
    This device DOES NOT support fastboot boot twrp.img
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
    7. Reboot and enjoy!
    8. To get Fox addons working, you need to reflash OrangeFox .zip file

    With TWRP/OrangeFox​

    1. Download OrangeFox .ZIP installer and flash in recovery

    2
    Nice, it's beta 2
    to apply encrypt patch, you must decrypt first.
    So
    - you have to disable security password/fingerprint in your parameter first.
    - then reboot in recovery
    - format data
    - reboot again to recovery and apply patch.
    2
    test (beta 2) after disabling security (fingerprint and pin)

    - flashing magisk.zip -> ok
    - backup -> ok
    - restore -> ok
    - MTP internal SD -> ok
    - MTP external SD -> nok, file manager stuck on it (win10 or linux mint)