General [TWRP] [ORANGEFOX] [UNOFFICIAL] [ROSEMARY] [BETA] TWRP 3.5.2 and TWRP 3.6+ for Xiaomi Redmi Note 10s

Search This thread

job.bousix

Senior Member
Mar 27, 2013
234
160
djerba
Bug report :

While in recovery, phone can't write to SD card nor OTG flash drive (can't backup to them, can't move files or rename them), it can only read them.

Looking forward for the new update, hopefully it will be a stable release
The bug is fixed with the version 3.6.0, now I can backup to my external SD Card directly.
Great work OP!
 
  • Like
Reactions: Yangasto

Turbodr

Member
Jul 8, 2020
13
4
Oh sad so If I need a nandroid backup I would flash twrp.img do the backup and then flash original boot.img again ?
It is enough to flash the boot.img file of the Stock ROM, but TWRP will be deleted. My advice to you is to patch boot.img from Magisk and use it with Root. I did so. Ubuntu vs Chroot I use.
 

Turbodr

Member
Jul 8, 2020
13
4
I installed TWRP 3.6.0 via Magisk module but I don't know how to open it. AVB is turned off and there is Root with Magisk.
 

job.bousix

Senior Member
Mar 27, 2013
234
160
djerba
I messed with system apps, which led to the phone entering bootloop. I had to restore it, thankfully I have made a backup. however, there was an update (12.5.15.0_Global). So I figured I would download the complete Fastboot ROM and flash it, than flash the newest version of TWRP and restore data.
The problems I faced :

- I could not boot to system, phone keeps booting to TWRP
- I could not recover data partition, I instantly encounter this error :

extracttarfork() process ended with error=255

I downgraded to 3.5.2 beta, phone booted normally and was able to restore the data with no errors in TWRP (but still gives a bootloop, I guess newer phones are more secure where we can't just inject data in data partition and expect it to work seemlessly)

As there will eventually be other system updates, I decided to give up on this right now and use the phone without root untill it gets its final update from xiaomi, so that the root will stay forever.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    MIUI13-ready builds are in testing and will be released asap, but I will need to make clear informations about which TWRP verskon people should install. ALSO, DONT try to boot a11 twrp on a12, this will just cause bootloop (and don't try a11 kernel on a12, it will just "panic at the disco")
    1
    Hi, don't work with (Global) V13.0.6.0.SKLMIXM
    1
    Hi, don't work with (Global) V13.0.6.0.SKLMIXM
    flash in MIUI 12.5 then flash MIUI 13 without flashing the boot image
  • 8
    @miravision I think we should also add credits to people like @J6idot , @mastersenpai05 and Myst33d who did a great job helping building twrp.
    6
    Hello. As one of the developpers of this TWRP DT, I am not really OK with that.

    Firstly, you linked the wrong device tree Real link here

    Also, I didn't published this on XDA because this TWRP is still in BETA. And it contains major bugs, like flashing dynamic partitions in fastbootd. Even if bugs will me fixed, I was planning to wait a release candidate before publishing the release here (this will require even more testing, if people want to help us testing, this will be even better).

    So please, can you delete this or add clear warnings about the beta state?

    Regards, Woomy
    5
    WARNING: THIS IS EXPERIMENTAL BETA MEANT FOR DEVELOPERS AND TESTERS NOT AS DAILY DRIVER

    Caution: Android 11 builds are incompatible with Android 12. Beware!

    Credits:

    @Woomymy
    @J6idot
    @mastersenpai05
    @myst33d
    https://github.com/notmyst33d

    Developers WoomyMy, J6idot , mastersenpai05 and Myst33d have helped develop an unofficial TWRP for rosemary - xiaomi redmi note 10s

    Installation Video:


    Code:
    https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file
    
    http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file


    Since this is not yet official, only proceed if you are competent enough and brave.

    (If you need instructions on how to flash, please do not flash this with fastboot method)

    Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.

    TWRP 3.6+ Development Build status, fixes, bugs and downloads: [here]


    NameModified
    Beta-07-11-30-202112/17/2021

    🗞 Changelog
    • Sync TWRP sources (Version number updated to 3.6.0)
    • Symlink /dev/block/bootdevice -> /dev/block/platform/bootdevice (required by some scripts like OrangeFox installer)
    • Allow flashing VBMeta
    • Disable "Reflash TWRP after flashing ROM". (Causes AVB problem when installing MIUI, can still be done manually)
    • Build ZIP TWRP installer
    • Publish build logs for more transparency
    🐛 Known bugs
    • Mounting Adopted storage
    • Vibrator

    NameModified
    RC-01-01-09-20221/9/2022

    🗞 Changelog
    • Fix Bootctrl
    • Fix vibrator
    🐛 Known bugs
    • Mounting Adopted storage

    TWRP Version 3.6.1_11-1​


    NameModified
    TWRP-3.6.1_11-1 3/13/2022

    🗞 Changelog
    • Fix BootCTRL
    • Update TWRP sources
    • Fix vibrator
    • Enable DT2W in recovery

    Install instructions​

    Without TWRP/OrangeFox​

    Note: You need a copy of your ROM boot.img
    This device DOES NOT support fastboot boot twrp.img
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
    7. Reboot and enjoy!

    With TWRP/OrangeFox​

    1. Download TWRP .ZIP installer and flash in recovery

    TWRP Version 3.6.2_11-1​


    NameModified
    TWRP-3.6.2_11-1 6/14/2022

    🗞 Changelog
    • Sync TWRP sources

    Orangefox Recovery Version R11.1_1-Beta​


    NameModified
    OrangeFox-R11.1_1-Beta3/13/2022

    🗞 Changelog
    • Fix BootCTRL
    • Update OrangeFox sources
    • Fix vibrator
    • Enable DT2W in recovery
    • Update Magisk OrangeFox addon to 24.2

    Install instructions​

    Without TWRP/OrangeFox​

    Note: You need a copy of your ROM boot.img
    This device DOES NOT support fastboot boot twrp.img
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
    7. Reboot and enjoy!
    8. To get Fox addons working, you need to reflash OrangeFox .zip file

    With TWRP/OrangeFox​

    1. Download OrangeFox .ZIP installer and flash in recovery
    2
    MIUI13-ready builds are in testing and will be released asap, but I will need to make clear informations about which TWRP verskon people should install. ALSO, DONT try to boot a11 twrp on a12, this will just cause bootloop (and don't try a11 kernel on a12, it will just "panic at the disco")
    2
    Developer WoomyMy has released an unofficial TWRP for rosemary - xiaomi redmi note 10s

    Installation Video:


    Code:
    https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file
    
    http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file

    Since this is not yet official, only proceed if you are competent enough and brave.

    (If you need instructions on how to flash, please do not flash this with fastboot method)

    Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.
    I'm sorry but, do you atleast have the permission to share this?
    Also, WommyMy should be the guy to upload it, not you.

    Edit: thanks for fixing the thread

    Also you're missing the device tree.