General [TWRP] [ORANGEFOX] [UNOFFICIAL] [ROSEMARY] [BETA] TWRP 3.5.2 and TWRP 3.6+ for Xiaomi Redmi Note 10s

Search This thread
By:
Advanced…
job.bousix

job.bousix

Senior Member
Mar 27, 2013
234
160
djerba
job.bousix said:
Bug report :

While in recovery, phone can't write to SD card nor OTG flash drive (can't backup to them, can't move files or rename them), it can only read them.

Looking forward for the new update, hopefully it will be a stable release
Click to expand...
Click to collapse
The bug is fixed with the version 3.6.0, now I can backup to my external SD Card directly.
Great work OP!
 
  • Like
Reactions: Yangasto
T

Turbodr

Member
Jul 8, 2020
13
4
Mino260806 said:
Oh sad so If I need a nandroid backup I would flash twrp.img do the backup and then flash original boot.img again ?
Click to expand...
Click to collapse
It is enough to flash the boot.img file of the Stock ROM, but TWRP will be deleted. My advice to you is to patch boot.img from Magisk and use it with Root. I did so. Ubuntu vs Chroot I use.
 
T

Turbodr

Member
Jul 8, 2020
13
4
I installed TWRP 3.6.0 via Magisk module but I don't know how to open it. AVB is turned off and there is Root with Magisk.
 
job.bousix

job.bousix

Senior Member
Mar 27, 2013
234
160
djerba
I messed with system apps, which led to the phone entering bootloop. I had to restore it, thankfully I have made a backup. however, there was an update (12.5.15.0_Global). So I figured I would download the complete Fastboot ROM and flash it, than flash the newest version of TWRP and restore data.
The problems I faced :

- I could not boot to system, phone keeps booting to TWRP
- I could not recover data partition, I instantly encounter this error :
extracttarfork() process ended with error=255

I downgraded to 3.5.2 beta, phone booted normally and was able to restore the data with no errors in TWRP (but still gives a bootloop, I guess newer phones are more secure where we can't just inject data in data partition and expect it to work seemlessly)

As there will eventually be other system updates, I decided to give up on this right now and use the phone without root untill it gets its final update from xiaomi, so that the root will stay forever.
 
You must log in or register to reply here.

Similar threads

b1boi
Question [Rosemary]Any working version of GCam for the Xiaomi Redmi Note 10s?
Replies
44
Views
50K
Aitex
Aitex
windowz414
Development [ROM][13][rosemary/secret/maltose] Evolution X "Tiramisu" for Redmi Note 10S
Replies
176
Views
41K
windowz414
windowz414
yshalsager
General [MIUI Updates Tracker] Redmi Note 10S (rosemary)
Replies
241
Views
35K
yshalsager
yshalsager
RandomAccessVemuri
How To Guide Flashing GSI roms on Redmi Note 10S and then fixing some issues, all without any custom recovery
Replies
112
Views
38K
R
redking974
yshalsager
Development [Firmware] Redmi Note 10S [rosemary] [Auto updated!]
Replies
51
Views
24K
yshalsager
yshalsager

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 8
    Woomymy
    Woomymy
    @miravision I think we should also add credits to people like @J6idot , @mastersenpai05 and Myst33d who did a great job helping building twrp.
    View
    6
    Woomymy
    Woomymy
    Hello. As one of the developpers of this TWRP DT, I am not really OK with that.

    Firstly, you linked the wrong device tree Real link here

    Also, I didn't published this on XDA because this TWRP is still in BETA. And it contains major bugs, like flashing dynamic partitions in fastbootd. Even if bugs will me fixed, I was planning to wait a release candidate before publishing the release here (this will require even more testing, if people want to help us testing, this will be even better).

    So please, can you delete this or add clear warnings about the beta state?

    Regards, Woomy
    View
    5
    miravision
    miravision
    WARNING: THIS IS EXPERIMENTAL BETA MEANT FOR DEVELOPERS AND TESTERS NOT AS DAILY DRIVER

    Caution: Android 11 builds are incompatible with Android 12. Beware!

    Credits:

    @Woomymy
    @J6idot
    @mastersenpai05
    @myst33d
    https://github.com/notmyst33d

    Developers WoomyMy, J6idot , mastersenpai05 and Myst33d have helped develop an unofficial TWRP for rosemary - xiaomi redmi note 10s

    Installation Video:


    Code: 
    https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file

http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file


    Since this is not yet official, only proceed if you are competent enough and brave.

    (If you need instructions on how to flash, please do not flash this with fastboot method)

    Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.

    TWRP 3.6+ Development Build status, fixes, bugs and downloads: [here]​


    TWRP -3.6.2_11-2

    NameModified
    TWRP-3.6.2_11-208/03/2022

    Changelog
    • Fix brightness when max brightness is 255
    • Render GUI at 60FPS
    • Reposition statusbar icons and remove top offset
    • A lot of code cleanup
    • Update TWRP sources
    • DONT INSTALL THIS ON MIUI 13
    Install instructions
    Without TWRP/OrangeFox
    Note: You need a copy of your ROM boot.img
    Click to expand...
    Click to collapse
    This device DOES NOT support fastboot boot twrp.img
    Click to expand...
    Click to collapse
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
    7. Reboot and enjoy!
    With custom recovery
    1. Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
    Compatibility
    Android 11 Roms: YES
    Android 12 Roms: NO







    TWRP-3.6.2_12-rc1

    NameModified
    TWRP-3.6.2_12-rc108/04/2022

    Changelog
    • Sync TWRP sources
    • Add support for Android 12 decryption
    • Fix booting on MIUI13
    • DONT INSTALL THIS ON MIUI 12.5
    Install instructions
    Without TWRP/OrangeFox
    Note: You need a copy of your ROM boot.img
    Click to expand...
    Click to collapse
    This device DOES NOT support fastboot boot twrp.img
    Click to expand...
    Click to collapse
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
    7. Reboot and enjoy!
    With custom recovery
    1. Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
    Compatibility
    MIUI 13 vendors: COMPATIBLE
    MIUI 12 vendors:
    • A11 GSI / MIUI 12 system: FULLY INCOMPATIBLE
    • A12 GSI: COMPATIBLE, but you CAN NOT flash the boot.img, you need to flash the UPDATE ZIP using a custom recovery / Magisk







    OrangeFox-R11.1_1-Unofficial

    NameModified
    OrangeFox-R11.1_1-Unofficial07/01/2022

    Changelog
    • Fix brightness when max brightness is 255
    • Render GUI at 60FPS
    • Reposition statusbar icons and remove top offset
    • A lot of code cleanup
    • Update OrangeFox sources
    • DONT INSTALL THIS ON MIUI 13
    • Update Magisk OrangeFox addon to v25.2
    Install instructions
    Without TWRP/OrangeFox
    Note: You need a copy of your ROM boot.img
    Click to expand...
    Click to collapse
    This device DOES NOT support fastboot boot twrp.img
    Click to expand...
    Click to collapse
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
    7. Reboot and enjoy!
    8. To get Fox addons working, you need to reflash OrangeFox .zip file
    With custom recovery
    1. Download OrangeFox .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
    Compatibility
    Android 11 Roms: YES
    Android 12 Roms: NO









    Older versions:

    NameModified
    Beta-07-11-30-202112/17/2021

    🗞 Changelog
    • Sync TWRP sources (Version number updated to 3.6.0)
    • Symlink /dev/block/bootdevice -> /dev/block/platform/bootdevice (required by some scripts like OrangeFox installer)
    • Allow flashing VBMeta
    • Disable "Reflash TWRP after flashing ROM". (Causes AVB problem when installing MIUI, can still be done manually)
    • Build ZIP TWRP installer
    • Publish build logs for more transparency
    🐛 Known bugs
    • Mounting Adopted storage
    • Vibrator

    NameModified
    RC-01-01-09-20221/9/2022

    🗞 Changelog
    • Fix Bootctrl
    • Fix vibrator
    🐛 Known bugs
    • Mounting Adopted storage

    TWRP Version 3.6.1_11-1​


    NameModified
    TWRP-3.6.1_11-13/13/2022

    🗞 Changelog
    • Fix BootCTRL
    • Update TWRP sources
    • Fix vibrator
    • Enable DT2W in recovery

    Install instructions​

    Without TWRP/OrangeFox​

    Note: You need a copy of your ROM boot.img
    Click to expand...
    Click to collapse
    This device DOES NOT support fastboot boot twrp.img
    Click to expand...
    Click to collapse
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
    7. Reboot and enjoy!

    With TWRP/OrangeFox​

    1. Download TWRP .ZIP installer and flash in recovery

    TWRP Version 3.6.2_11-1​


    NameModified
    TWRP-3.6.2_11-16/14/2022

    🗞 Changelog
    • Sync TWRP sources

    Orangefox Recovery Version R11.1_1-Beta​


    NameModified
    OrangeFox-R11.1_1-Beta3/13/2022

    🗞 Changelog
    • Fix BootCTRL
    • Update OrangeFox sources
    • Fix vibrator
    • Enable DT2W in recovery
    • Update Magisk OrangeFox addon to 24.2

    Install instructions​

    Without TWRP/OrangeFox​

    Note: You need a copy of your ROM boot.img
    Click to expand...
    Click to collapse
    This device DOES NOT support fastboot boot twrp.img
    Click to expand...
    Click to collapse
    1. Reboot your phone into fastboot mode
    2. Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
    3. Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
    4. Reboot into recovery mode (fastboot reboot recovery)
    5. When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
    6. Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
    7. Reboot and enjoy!
    8. To get Fox addons working, you need to reflash OrangeFox .zip file

    With TWRP/OrangeFox​

    1. Download OrangeFox .ZIP installer and flash in recovery

    View
    2
    murigny64
    murigny64
    Nice, it's beta 2
    to apply encrypt patch, you must decrypt first.
    So
    - you have to disable security password/fingerprint in your parameter first.
    - then reboot in recovery
    - format data
    - reboot again to recovery and apply patch.
    View
    2
    murigny64
    murigny64
    test (beta 2) after disabling security (fingerprint and pin)

    - flashing magisk.zip -> ok
    - backup -> ok
    - restore -> ok
    - MTP internal SD -> ok
    - MTP external SD -> nok, file manager stuck on it (win10 or linux mint)
    View

New posts