What does "Re-inject TWRP" do? Does it just re install TWRP? I've never seen this option in TWRP before.
What does "Re-inject TWRP" do? Does it just re install TWRP? I've never seen this option in TWRP before.
Code:*** Disclaimer I am *NOT* responsible for bricked devices or anything else! ***
This is a TWRP-based Recovery for Samsung Galaxy Core Plus SM-G350 aka [cs02].
It will give you all functions available in normal TWRP.
Special credits to @kadjarT and @zim555 for the original source and help!
Everything should work with this release.
Downloads
Stable release 2
img or flashable tar
XDA:DevDB Information
CWM Recovery for SM-G350
Tested with SM-G3500 NEE Single-SIM
Contributors
santeri3700, kadjarT
Source Code: https://github.com/santeri3700/android_device_samsung_cs02
Version Information
Status: Alpha
Created 2015-12-21
Last Updated 2015-12-21
I'm a new guy to this whole thing can you please tell me how to flash this without root, or how to root the device without apps like vRoot etc.
You can do this:
1: Download ODIN on your pc
1b: Download the supersu zip and put them into your sd card
2: Download the .tar.md5 file from op
3: make sure you have a backup of your data and make sure that your battery is at least at 75%
4: Reboot your device in download mode pressing vol- power and home button
5: confirm pressing vol+ and connect them to your pc
6: now you are in download mode. download samsung usb drivers (simply google it) and install them.
7: open odin, a message "Added!!!" should be appear on the message box.
8: press AP and browse your .tar.md5 file that you have downloaded
9: Press start
10: After the flash is finished, disconnect the phone, pull out the battery, pull in again and boot it in recovery mode pressing vol+ power and home button.
11: Now you are on TWRP Recovery. Click install, browse for your supersu zip, select them and swipe to confirm. Then click reboot your device.
Enjoy!
Thanks a lot, but just to clarify which superSU ZIP, and wich Tar.md5? I already downloaded Odin and the Samsung USB drivers by installing Kies. Do I need amy other drivers?
After flashing the tar, only appears the original recovery and not twrp.
I´ve found the file install-recovery-install.sh
What should i do?
You need to rename these files:
1: /system/recovery-from-boot.p to recovery-from-boot.bak
2: /system/install-recovery.sh to install-recovery.bak
Then reflash the TWRP. The original recovery shouldn't be reinstalled anymore
Sent from my HTC 10 using
Thank you so much, I appreciate your attencion and work
You need to rename these files:
1: /system/recovery-from-boot.p to recovery-from-boot.bak
2: /system/install-recovery.sh to install-recovery.bak
Then reflash the TWRP. The original recovery shouldn't be reinstalled anymore
Sent from my HTC 10 using
Thank you so much, I appreciate your attencion and work
If your phone is rooted:
1: Download Rashr
2: Download TWRP Image
3: Flash TWRP with Rashr
4: Enjoy!
@santeri3700 what do you think about this device? Will it work or the two devices has different partition tables?
Incompatible.
Ehm, the recovery that you're using is stock recovery. Uncheck in odin auto reboot, then reboot in recovery if odin doesn't do itself. Then complete the stepsI have problem after installing it shows me Android symbol with written 'no command'
When I wipe cache partition it shows error message and restarts
When I try to install custom rom it says couldn't verify hole file and restarts
Some other SM-G350 (like SM-G3502T or the SM-G350L) are based on a comletely other chipset. This Recovery won't run on any of them. The only way to restore your system/recovery is to download the appropriate firmware from sammobile.com and flash it through Odin.Hello.. I was wondering if there's a way to flash a custom recovery for my SM-G350L.. This one doesn't work I think.. I flashed it with ODIN but when I go into recovery mode (using vol up+home+power) I get stucked in a screen that has mixed the Samsung Core Plus logo and the ODIN header... So now I don't have a recovery mode...
Also I can use this screen as if it was the download mode..
Here's a picture I took of the screen:
My camera is not very good so here is what the text says:
ODIN MODE
PRODUCT NAME: SM-G350L
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P0
WRITE PROTECTION: Enable
By the way, the device is rooted.
CM11 isn't compatible with SM-G350E, so I think TWRP too.
*** Disclaimer
I am *NOT* responsible for bricked devices or anything else! ***
CM11 isn't compatible with SM-G350E, so I think TWRP too.
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Code:*** Disclaimer I am *NOT* responsible for bricked devices or anything else! ***
This is a TWRP-based Recovery for Samsung Galaxy Core Plus SM-G350 aka [cs02].
It will give you all functions available in normal TWRP.
** DO NOT MAKE A BUG REPORT ABOUT THE GRAPHICAL BUG! **
Downloads
Alpha release 1
img or flashable tar
XDA:DevDB Information
CWM Recovery for SM-G350
Tested with SM-G3500 NEE Single-SIM
Contributors
santeri3700, kadjarT
Source Code: https://github.com/santeri3700/android_device_samsung_cs02
Version Information
Status: Alpha
Created 2015-12-21
Last Updated 2015-12-21
After flashing the tar, only appears the original recovery and not twrp.
I´ve found the file install-recovery-install.sh
What should i do?