[TWRP] [ TWRP 3.2.0-0/3.3.1-0 For Huawei MediaPad M3 Lite 8/10 ]

Search This thread

surdu_petru

Recognized Contributor
Feb 3, 2010
7,156
23,160
Paris
Hi!
Thanks for the fast response.
Unfortunately it still doesnt work!
I attached a screenshot. Do you think you could send it to me, if it works for everyone else?

Yes, try to re-download, and not just once ... sometimes I have the same issue like you, but if you try to download several times, you'll find a download link mirror :eek:
 

mmg06

Member
Dec 26, 2009
34
0
NRW
I tried it via a software the whole night... Every 5 minutes... And JDownloader did not find a mirror...
So believe me: I tried it several times and I've got everytime the same issue!

I would be very grateful, if you send me a download link for e.g. Google drive via direct message! :)
 
Last edited:

surdu_petru

Recognized Contributor
Feb 3, 2010
7,156
23,160
Paris
I tried it via a software the whole night... Every 5 minutes... And JDownloader did not find a mirror...
So believe me: I tried it several times and I've got everytime the same issue!

I would be very grateful, if you send me a download link for e.g. Google drive via direct message! :)

Yes, I guess that you are right

I have sent a notification about this problem, I hope it will be resolved as soon as possible ... anyway I will keep you informed with the answer received from androidfilehost :eek:

For the moment I apologize on their behalf for the inconvenience :)
 
  • Like
Reactions: mmg06

mmg06

Member
Dec 26, 2009
34
0
NRW
Yes, I guess that you are right

I have sent a notification about this problem, I hope it will be resolved as soon as possible ... anyway I will keep you informed with the answer received from androidfilehost :eek:

For the moment I apologize on their behalf for the inconvenience :)

Hi!
Everythings works fine, now and I just installed LOS 17 a moment ago.
A big thanks!
 

joff1234

Senior Member
May 7, 2007
61
5
Hi,
A "beginner" question ....
Could you give me a hint where to get adb & fastboot?
I've unlock bootloader with Dc Unlocker, can i use adb and fastboot that came with it?
Thanks!
 
Last edited:

joff1234

Senior Member
May 7, 2007
61
5
Hi,
A "beginner" question ....
Could you give me a hint where to get adb & fastboot?
I've unlock bootloader with Dc Unlocker, can i use adb and fastboot that came with it?
Thanks!

Hi,
Used fastboot from HiSuite, and all going well.
I've installed twrp 3.2 and LOS 16, all ok.
Now installing twrp 3.3.1-2 and LOS 17 ...
Yes!
JF.
 

Crawl71

Member
Nov 26, 2011
31
0
Airdrie
Second time writing this...I posted in another thread earlier but thought I would here as well as I crossed two threads of instructions to come to my error!

I unlocked my BAH-W09 bootloader and then flashed TWRP and then tried installing MAGISK. This caused failures (denied access) and now I am stuck on the 'unlocked device' warning which just loops. I believe the error in my process was not flashing the kernel source that was listed by OP. :rolleyes:

My question now is what is the best way to fix this;
1. Use the Huawei recovery option and restart the process, or
2. Can I flash the custom kernel source listed and continue on.

I don't want to make things worse and just FYI, my ultimate goal here is to get to get to LOS17.1
 

DutchF

Member
Oct 13, 2012
12
5
Great work!

Thanks for your post! It took me a while as newbie, but I got it to work!
 
Last edited:

RoBy46

Senior Member
May 20, 2010
140
3
Piacenza
Hi, I have a BAH-W09 tablet, installing the twrp_3.2.0-0.img does not work, it sends me to the EMUI screen saying to update recovery, if I flash the twrp_3.3.1-0.img turns on but remains fixed screen, you know how can i solve?

Thanks.
 

RoBy46

Senior Member
May 20, 2010
140
3
Piacenza
Hi !

You are on stock firmware EMUI ?
Yes, with bootloader unlock.

20201225_234132.jpg
 
Last edited:

surdu_petru

Recognized Contributor
Feb 3, 2010
7,156
23,160
Paris


Ok, good ... you only need to follow carefully Installation instruction from this thread into OP !

Please, where do you see that you can install TWRP 3.3.1-3 if you are on stock firmware EMUI ????

There have been a lot of cases in which the devices broke down only due to the fact that the installation instructions were not followed step by step !
 
Last edited:

RoBy46

Senior Member
May 20, 2010
140
3
Piacenza
Ok, good ... you only need to follow carefully Installation instruction from this thread into OP !

Please, where do you see that you can install TWRP 3.3.1-3 if you are on stock firmware EMUI ????

There have been a lot of cases in which the devices broke down only due to the fact that the installation instructions were not followed step by step !
I gave the shell command fastboot flash recovery twrp_3.2.0-0.img

ScreenHunter 43.jpg
 

RoBy46

Senior Member
May 20, 2010
140
3
Piacenza
Ok, with TWRP 3.2.0 you should install LOS 16.0 Android Pie, what do you need more than that ? After that you should continued to follow carefully the installation instructions ... if you want to upgrade to LOS 17.1 !

Good luck !
I just want to be able to root, but the recovery does not work, I install the TWRP 3.2.0 but I see the twrp_3.3.1-0.
 

surdu_petru

Recognized Contributor
Feb 3, 2010
7,156
23,160
Paris
I just want to be able to root, but the recovery does not work, I install the TWRP 3.2.0 but I see the twrp_3.3.1-0.

Ofcourse it's working .... you need to install TWRP 3.2.0 and right after that LOS 16.0 !

TWRP it's not tested on stock EMUI because I never managed to return to stock after installed TWRP 3.2.0 and LOS 16.0 !


EDIT:

OK, if you intended to install TWRP just for root, you should have asked from the beginning ...

Now, if you can't revert to stock, you can use Android 10 LOS 17.1 ... it's much better than stock and also has the last security patches from Google !
 
Last edited:

szgxzdk

New member
Mar 21, 2021
1
0
Sorry I can't download TWRP 3.3.1.0 (as well as any other files) from AndroidFileHost. It always suggests no mirror found. Could you please upload it by the forum's original attaching function or by MEGA just as that you do to TWRP 3.3.1.3? Many thanks!
 

surdu_petru

Recognized Contributor
Feb 3, 2010
7,156
23,160
Paris
Sorry I can't download TWRP 3.3.1.0 (as well as any other files) from AndroidFileHost. It always suggests no mirror found. Could you please upload it by the forum's original attaching function or by MEGA just as that you do to TWRP 3.3.1.3? Many thanks!
It's working, I tried right now and it's working for download !

I think you have to try several times to download until a mirror will be available.

Also you may need to change the browser ( if, for example, it doesn't work on Chrome )
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    teamwin-recovery-project-twrp-logo.jpg



    TWRP - 3.3.1-0 For Huawei MediaPad M3 Lite 8/10


    Officially Supported Devices :


    Huawei MediaPad M3 Lite 10 : ( code name Bach ) : BAH-AL00/BAH-L01/BAH-L09/BAH-W09

    Huawei MediaPad M3 Lite 8 : ( code name Chopin ) : CPN-AL00/CPN-L0J/CPN-L09/CPN-W09




    Instructions :

    1. unlock bootloader
    3. unlock OEM on Developer options
    3. enter on bootloader mode :
    ( switch off your device then keep pressed volume down key when plug to USB cable )
    4. flash TWRP 3.2.0-0 recovery using the following command : "fastboot flash recovery twrp_3.2.0-0.img"
    4.1. Update TWRP to 3.3.1-0 ONLY if your device run Android Pie ( LOS 16.0 )
    5. reboot to recovery ( please check this info after TWRP was installed - and before take any actions )



    Downloads :

    TWRP 3.2.0
    - intended to be installed on stock Huawei Firmware Android N ( but only for install LOS 16.0 )
    ( This is the first TWRP which must be installed on your device running EMUI 5.x Android N )
    twrp_3.2.0-0.img MD5: 201476ac16a613da42acbf9a36d78c79


    TWRP 3.3.1 - intended to be used with LineageOS 16.0 Android Pie !
    ( You must use TWRP 3.2.0-0 to flash LOS 16.0 - later you can update to TWRP 3.3.1-0 )
    twrp_3.3.1-0.img MD5: 967f55ab71a755f2635e7b990dcc3922


    Source :

    kernel source : https://github.com/Huawei-Dev/android_kernel_huawei_bach



    Credit :

    TeamWin - TWRP



    Mention :

    TWRP for Huawei MediaPad M3 Lite 8 (CPN) was fixed with help of @Lothgar & @fallensoldier.

    Thank you guys for your help !


    Best regards !
    3
    Huh - you have Lineage OS working on the Mediapad M3?? If there is such a miracle, please do share!

    Yes, currently it's running on my Huawei MediaPad M3 Lite 10 !

    I'm hard working to fix camera ... but I'll release a test version soon. Thanks for understanding !
    2
    I just managed to fix Sensors on LineageOS 16, Android Pie :

    Screenshot-20190520-095411-Sensor-Test.png



    Now I'm working on enable Camera ... :)
    2
    Android Pie on my Huawei MediaPad M3 Lite 10 :


    Screenshot-20190507-120845-Settings.png



    Screenshot-20190507-202948-Settings.png
    2
    Waaao, nice job!!!
    How to get it please?

    Thx!

    Hi !

    Unfortunately is not yet ready, I still have to work on : sensors, camera & data LTE.

    After that, I will upload it here for who wants to test/use it :)