For anyone whose headphones never sit in this phone properly, I ended up getting frustrated enough to run a 7mm or 8mm drill bit around the top of the headphone jack by hand. Took approx 0.5mm or so off at the deepest point which is now allowing my headphones to stay in without a problem.
2 things to note. I did this upside down to avoid any shavings falling into the jack and getting stuck. I also cleaned the drill bit first.
I bought my Ulefone Be Pro recently and had trouble installing the Lollipop update, but its installed and works ok but there is a lot of bloat and stuff I want to take out.
I had a look at the ROMS on NeedRom but they dont give much detail. Is there one that is closest to a plain stock ROM? I had a Google Play Edition ROM on my old phone which had basically nothing and I want something similar for this one.
Also I am having trouble with Bluetooth playback. It works fine for a while, like 10 - 15 minutes, then gets really distorted. I have tried different settings and media players but they all do the same. Is this just a ROM issue?
Hey guys. So after all these months since the phone's release, what are your thoughts? would you buy it again? would you avoid it? is it worth all your troubles? I'm asking this because I'm looking to buy this phone since Gearbest has it for $125.99. Thanks for any help.
Mtk droid doesn't work properly with cpu mt6732 and mt6752. Didn't work backup, backup of imei and recovery made. Only cwm or ctr recoveries were able to backup ad restore correctly..
I have success with firmware update (the one found in needrom site) at dirst attempt, but i use last flashtool 5.1452:Maybe i just need to bed my battery in.
Has anyone successfully flashed via SPFlashTool? I'm getting these errors in the logs:
02/12/15 16:30:01.566 BROM_DLL: BRom_AutoBoot::BRom_StartCmd(1): m_ext_clock(EXT_26M), m_baud_rate(9600), SEND(0xA0)->RECV(0xA0), fail_retry(12372). (FlashToolLib/sv5/common/interface/src/brom_autoboot.cpp:265)
02/12/15 16:30:01.576 BROM_DLL: BRom_AutoBoot::BRom_StartCmd(1): m_ext_clock(EXT_26M), m_baud_rate(57600), SEND(0xA0)->RECV(0xA0), fail_retry(12373). (FlashToolLib/sv5/common/interface/src/brom_autoboot.cpp:265)
02/12/15 16:30:01.586 BROM_DLL: BRom_AutoBoot::BRom_StartCmd(1): m_ext_clock(EXT_26M), m_baud_rate(9600), SEND(0xA0)->RECV(0xA0), fail_retry(12374). (FlashToolLib/sv5/common/interface/src/brom_autoboot.cpp:265)