Unbrick help / Need bin. files

[konsolen]

Hy nexus friends,

I need help from someone with a 791F 32GB. I dont know if a 790 or a 16gb version is identical.
It would be great if someone with a rooted device can make a backup for me of the bootloader bin files.
aboot, sbl1, rpm, tz, sdi, sbl1b, tzb, rpmb, abootb, misc, laf, persist.

I flashed the hammerhead bootloader and stuck at 9008 mode.

It will be ver great if someone could help me.
Some partition apps could make a backup or with the dd command.
If i fet a solution, i would post it here. At the moment i had the device and the tools that i flashed for test a nexus 5 sbl. So write is possible.

Thanks for help guys

 

[tacofromhell]

Where can I see if my phone is 791F?

 

[Tomyk89]

i have the US Nexus 5X 32GB. Tell me what to do and I'll get you what you need.

 

[SlimSnoopOS]

Where can I see if my phone is 791F?

Model number on the phone box and I believe in the bootloader screen: turn off phone then hold volume down and power.

Sent from my Nexus 5X using Tapatalk

 

[tacofromhell]

Model number on the phone box and I believe in the bootloader screen: turn off phone then hold volume down and power.

Sent from my Nexus 5X using Tapatalk

Ok. Just rebooted into bootloader and under "Variant" it says LGH791 but no F, sorry

 

[konsolen]

Thx for your help.
You can backup the partitions with some partition backup apps or with dd.
If you look with a file explorer in /dev/block/platform/soc.0/f9824900.sdhci/by-name/XXXXX , XXXX there are the partiton names.

If you want to copy with adb, make adb shell, su, and then:
dd if= /dev/block/platform/soc.0/f9824900.sdhci/by-name/cmnlib of=sdcard/cmnlib.img

Around 36 partitons are in the MM build. System, cache, userdata are not needed..

 

[nate0]

Thx for your help.
You can backup the partitions with some partition backup apps or with dd.
If you look with a file explorer in /dev/block/platform/soc.0/f9824900.sdhci/by-name/XXXXX , XXXX there are the partiton names.

If you want to copy with adb, make adb shell, su, and then:
dd if= /dev/block/platform/soc.0/f9824900.sdhci/by-name/cmnlib of=sdcard/cmnlib.img

Around 36 partitons are in the MM build. System, cache, userdata are not needed..

Have you found a solution to get booting again? Been searching and tried multiple methods to repair my boot image on the H791 I own.

I have worked with another XDAer who extracted and now have the bootimage files from several stock H791 files available. They include the GPT from the stock image MDA89E and the boot image files from bootloader-bullhead-bhz10i.img bootloader-bullhead-bhz10k.img and bootloader-bullhead-bhz10m.img. Let me know if you still need these. I see 11 files in the boot image. During some testing I flashed over the sbl1 on my device and lost the ability do anything but go into QUSB DL mode 9008 as well.

As I am writing this I am now wondering if there is a separate set of SBL etc. files for the International variant? We may need to extract from the 791 tot file available the needed files if we do not have another method of obtaining them. Let me know if you have found a workable way to flash the needed boot images in place. Thanks.

 

[David]

Have you found a solution to get booting again? Been searching and tried multiple methods to repair my boot image on the H791 I own.

I have worked with another XDAer who extracted and now have the bootimage files from several stock H791 files available. They include the GPT from the stock image MDA89E and the boot image files from bootloader-bullhead-bhz10i.img bootloader-bullhead-bhz10k.img and bootloader-bullhead-bhz10m.img. Let me know if you still need these. I see 11 files in the boot image. During some testing I flashed over the sbl1 on my device and lost the ability do anything but go into QUSB DL mode 9008 as well.

As I am writing this I am now wondering if there is a separate set of SBL etc. files for the International variant? We may need to extract from the 791 tot file available the needed files if we do not have another method of obtaining them. Let me know if you have found a workable way to flash the needed boot images in place. Thanks.

I'm on the same boat , hope you have something to boot it up
It's been more than 3 weeks, my 5X just brick itself . And LG doesn't support 5X in my country . I'm very very hoping you will find solution.

 

[nate0]

I'm on the same boat , hope you have something to boot it up
It's been more than 3 weeks, my 5X just brick itself . And LG doesn't support 5X in my country . I'm very very hoping you will find solution.

I think the only way from my perspective so far is to manually flash the needed QComm/boot image/boot loader files with something that can interface with the phone. I am pretty sure I know a method to manually do this but need the flash programmer that works with this device to accomplish. Or if there is a way to add MSM8992 support to the BoardDiag tool, that would work...I have not given up, just have not had a whole lot of time to work on this the past 2 days.

 

[David]

I think the only way from my perspective so far is to manually flash the needed QComm/boot image/boot loader files with something that can interface with the phone. I am pretty sure I know a method to manually do this but need the flash programmer that works with this device to accomplish. Or if there is a way to add MSM8992 support to the BoardDiag tool, that would work...I have not given up, just have not had a whole lot of time to work on this the past 2 days.

I see boardiag for n5 , please don't give up ?.
And i see blank flash file for N6

 

[konsolen]

Try to connect the usb cable with the pressed vol up button. Normaly the lg download screen should pop up.
Its possible then to flash a tot file with the lg up tool.
But i found only one tot file around the i net.
It will be flashed but hang in the bootscreen.

A org. tot or kdz file were great or a solution to create such a file.

 

[David]

Try to connect the usb cable with the pressed vol up button. Normaly the lg download screen should pop up.
Its possible then to flash a tot file with the lg up tool.
But i found only one tot file around the i net.
It will be flashed but hang in the bootscreen.

A org. tot or kdz file were great or a solution to create such a file.

I can go to download mode but it can't hang , the screen turns to black Immediately. I'm just waiting for another way .

 

[nate0]

I can go to download mode but it can't hang , the screen turns to black Immediately. I'm just waiting for another way .

Yes. The FW download screen is not an option here. Seems those of us currently needing a solution or method is do to the phone being in QC emergency mode only. I can see my phone in device manager only as with the QC HUSB 9008 drivers.

 

[David]

Yes. The FW download screen is not an option here. Seems those of us currently needing a solution or method is do to the phone being in QC emergency mode only. I can see my phone in device manager only as with the QC HUSB 9008 drivers.

Yes it same , i got that to.
So what is blank flash? on N6 thread .