How to fix system partition? possible if use adb shell?
Update : the tool work fine, i think something went wrong when flashing edl
Device revived and work fine.
Last edited:
[UNBRICK/RAW] Revive your bricked ASUS ROG Phone 3 [23-NOV-2021]
- Thread starter deadlyindian
- Start date
-
- Tags
- asus asusrog3 rog3 unbrick unbricktool
Update : the tool work fine, i think something went wrong when flashing edl
Device revived and work fine.
Hi. My rog phone work normal is tencent version with ww rom so i want flash cn raw but my computer don't recognize my phone when boot into bootloader from side port. Any suggestions?
Thanks.
Edit: finally I understand what's going on. Because from CN to WW switch my bootloader softbrick
Thanks.
Edit: finally I understand what's going on. Because from CN to WW switch my bootloader softbrick
Last edited:
Hi , 3 says ago my phone went to black screen while I was listening to music ( everything was working except screen was black) , usually when this happens I took the power and volume- to reset but this time after doing that my phone won't boot ,. I tried many things but it just didn't work , than I wait till the battery drain out ( I can feel when It was very cold) and I put it in to the character red light blinks for a minutes then stoped again nothing happens even after a few hours , PC won't recognise the device at all
So I decided to use the test point for EDL boot , it worked and I get the unbrick tools success message and even the green led light ,but again won't boot to bootloader in any way , I tried everything ( removing battery socket , get the volume+ and connect USB and etc)
Please if possible someone help me
Thanks
So I decided to use the test point for EDL boot , it worked and I get the unbrick tools success message and even the green led light ,but again won't boot to bootloader in any way , I tried everything ( removing battery socket , get the volume+ and connect USB and etc)
Please if possible someone help me
Thanks
did you find any solution or idea how to fix it?
it's so sad to see this level of broke only by a software issue , my phone was on the latest firmware also , i think after this phone I'm totally finished with Asus
Last edited:
i found this file , I'm not sure if I'm allowed to send any link here so i will just write the name
ZS661KS-factory-redownload-QMSCT-FUSED-17.0501.2001.57-0-F.zip
but the instruction looks so complicated and it needs qdart which there is no way to download
if someone can make it simpler and we can flash by miflash or Qualcomm flash image loader would be great
ZS661KS-factory-redownload-QMSCT-FUSED-17.0501.2001.57-0-F.zip
but the instruction looks so complicated and it needs qdart which there is no way to download
if someone can make it simpler and we can flash by miflash or Qualcomm flash image loader would be great
Last edited:
Please help me! I have unlocked the bootloader for my rog phone 3 strix edition, how do I relock the bootloader. I keep getting a message at the start about my phone being unstable etc. I just want to revert it back to how it was. Is there a tutorial of how to relock the bootloader? I need step by step instructions because I am a newbie
So there are two side ports - Orange / Black
Orange - Used for ROG Phone Accessories only & never ever plug your charger in there.
Black - Charging & Data Transfer.
RAW 17.0823.2102.143 has been added
I've compressed the file further so it's smaller compared to previous RAW Firmware's, hope this helps someone who is low on data out there.
I've compressed the file further so it's smaller compared to previous RAW Firmware's, hope this helps someone who is low on data out there.
Last edited:
Yes but you dont need to do that, simply put phone into fastboot open ADB tool and install drivers while phone is in fastboot and write the command: fastboot oem asus-lock
system does not boot and can't flash anything through twrp, says 'failed to mount /system_root',/vendor,/metadata also do not mount
Last edited:
djensen777
Member
Flashed latest rom WW_ZS661KS_17.0823.2102.143_M3.33.18.10-ASUS_1.1.95_Phone-user.raw after ROG_PHONE_3_ZS661KS_UNBRICK_EDL and this is what CMD prompt window reported.
as youcan see there are some errors.
Can any one help me figure this out?
Would appreciate it.
Code:
"ERRORLEVEL: 0 "
"""""""""""""""""""
"UPDATE SUCCESS !!"
"""""""""""""""""""
"UPDATE super.img"
error: write_sparse_skip_chunk: don't care size 1817266059 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 1280329611 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 745547659 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 213165963 is not a multiple of the block size 4096
Sending sparse 'super' 1/5 (524284 KB) error: write_sparse_skip_chunk: don't care size 1817266059 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 1817266059 is not a multiple of the block size 4096
OKAY [ 17.993s]
Writing 'super' OKAY [ 0.003s]
Sending sparse 'super' 2/5 (524284 KB) error: write_sparse_skip_chunk: don't care size 1280329611 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 1280329611 is not a multiple of the block size 4096
OKAY [ 18.130s]
Writing 'super' FAILED (remote: 'Error: Last flash failed : Bad Buffer Size')
fastboot: error: Command failed
"Reboot bootloader..."
Rebooting into bootloader OKAY [ 0.001s]
Finished. Total time: 0.012s
"Erase Userdata and reboot device..."
(bootloader) bat vol = 4367
OKAY [ 0.006s]
Finished. Total time: 0.012s
Erasing 'metadata' OKAY [ 0.041s]
Finished. Total time: 0.047s
******** Did you mean to fastboot format this f2fs partition?
Erasing 'userdata' OKAY [ 0.789s]
Finished. Total time: 0.799s
F2FS-tools: mkfs.f2fs Ver: 1.12.0 (2018-11-12)
Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 967689880 (472504 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
[f2fs_init_sit_area: 535] Filling sit area at offset 0x00600000
[f2fs_init_nat_area: 569] Filling nat area at offset 0x02a00000
[f2fs_write_root_inode:1147] Writing root inode (hot node), 49200 0 200 at offset 0x00299520
[f2fs_write_default_quota:1223] Writing quota data, at offset 00049801, 00049802
[f2fs_write_qf_inode:1318] Writing quota inode (hot node), 49200 0 200 at offset 0x00299521
[f2fs_write_default_quota:1223] Writing quota data, at offset 00049803, 00049804
[f2fs_write_qf_inode:1318] Writing quota inode (hot node), 49200 0 200 at offset 0x00299522
[f2fs_update_nat_root:1372] Writing nat root, at offset 0x00002a00
[f2fs_add_default_dentry_root:1567] Writing default dentry root, at offset 0x00049800
Info: Overprovision ratio = 0.290%
Info: Overprovision segments = 1378 (GC reserved = 697)
[f2fs_write_check_point_pack: 713] Writing main segments, cp at offset 0x00000200
[f2fs_write_check_point_pack: 850] Writing Segment summary for HOT/WARM/COLD_DATA, at offset 0x00000201
[f2fs_write_check_point_pack: 877] Writing Segment summary for HOT_NODE, at offset 0x00000202
[f2fs_write_check_point_pack: 889] Writing Segment summary for WARM_NODE, at offset 0x00000203
[f2fs_write_check_point_pack: 900] Writing Segment summary for COLD_NODE, at offset 0x00000204
[f2fs_write_check_point_pack: 908] Writing cp page2, at offset 0x00000205
[f2fs_write_check_point_pack: 928] Writing NAT bits pages, at offset 0x000003fe
[f2fs_write_check_point_pack: 949] Writing cp page 1 of checkpoint pack 2, at offset 0x00000400
[f2fs_write_check_point_pack: 968] Writing cp page 2 of checkpoint pack 2, at offset 0x00000405
[f2fs_write_super_block:1001] Writing super block, at offset 0x00000000
Info: format successful
Erasing 'userdata' OKAY [ 0.770s]
Sending 'userdata' (85 KB) OKAY [ 0.007s]
Writing 'userdata' OKAY [ 0.005s]
Erasing 'metadata' OKAY [ 0.043s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 8.948s
Rebooting OKAY [ 0.000s]
Finished. Total time: 0.000sCan any one help me figure this out?
Would appreciate it.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
18Unbrick your ASUS ROG Phone 3 for free!!
Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself.
I noticed some people in the community charging upto 50$ for the firmware which should've been free from the start.
Code:#include <std_disclaimer.h> /* * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. * I'm not gonna tell you how to install drivers and other things and only[COLOR="RoyalBlue"][/COLOR] * proceed with this if you know what you're doing and please do some * research first. YOU are choosing to make these modifications, and if you * point the finger at me for messing up your device, I will laugh at you. */
NOTE - In case it's a Hard / Soft Brick
• For Hard Brick - Hard brick is when your device can only enter EDL mode and shows up as Qualcomm HS-USB QDLoader 9008 in device manager.
- Just follow from Step 1 to 3 to fix your device.
• For Soft Brick - Soft brick is when the system fails to boot but you can access fastboot mode.
- Just follow Step 3 to fix your device.
Prerequisites ►
• Windows PC
• Device fastboot drivers
• Qualcomm EDL drivers
• a bricked ROG 3 duh
Downloads ►
• EDL Unbrick tool - ROG_PHONE_3_ZS661KS_UNBRICK_EDL.7z
• RAW ROG 3 Firmware - Check the second post below
Instructions ►
Make sure you have device manager opened up to see if the device is connected.
1] Extract the EDL firmware
- Use the side port and connect device to PC
- Then run the file named 1ROG3_VFLASH_EDL.cmd
2] After you get an EDL SUCCESS message let the device boot within a minute or two into bootloader, use the device manager to
check if it's in EDL and if it's still there after a minute, press Power key + Volume down for about 12-13 seconds until
you don't see it in Device Manager, keep it plugged in and let it boot or try to power it on so it gets into the bootloader.
3] Once it's in bootloader flash any of the RAW firmware linked above depending on the device that you have, if its Tencent then flash CN, for global it's WW.
- Extract the RAW firmware and run the file zs661ks_raw_flashall.bat , have some patience and do not disconnect the device as this will take some time.
• That's all folks.
ROG 2/3 Telegram Groups & Channels ►
Global Discussion Group
Updates Channel
GCam Discussion10List of RAW firmware (latest at the top)
— Android 11 RAWs —
18.0410.2108.158 : WW
18.0410.2106.138 : WW
18.0410.2105.133 : WW
— Android 10 RAWs —
17.0823.2104.147 : WW
17.0823.2102.143 : WW
17.0823.2012.131 : WW
17.0823.2012.122 : WW
17.0823.2009.99/100 : WW | CN
17.0823.2009.98 : WW | CN
17.0823.2008.78 : WW | CN
17.0823.2007.58 : WW | CN
17.0823.2007.47/48 : WW | CN
17.0823.2007.32 : WW | CN2RAW Firmware updated - Get from here
• Re-uploaded 17.0823.2102.143 (A10)
• Added 17.0823.2104.147 (A10)
• Added Android 11 RAWs
- 18.0410.2106.138 & 18.0410.2105.133
Thanks to a user from the Global Telegram Group for 18.0410.2106.138 (A11) RAW2RAW 17.0823.2102.143 has been added
I've compressed the file further so it's smaller compared to previous RAW Firmware's, hope this helps someone who is low on data out there.2
