Unbricking "Service Required Code Corrupt"

Boss442

Boss442

Senior Member
Jul 19, 2012
428
551
0
24
Mar Del Plata
May 17, 2013 at 8:24 PM
If you use "xFSTK-SoC-Driver-Setup" and "unbrick.bat" to "Unbrick your phone, and you got the "Service code corrupt" error..., This method is untested but i think it is the problem...​
You need This:
  • Original ICS FIRMWARE that come with your phone.
  • xFSTK-SoC-Driver-Setup Installed (read How Install "xFSTK-SoC-Driver-Setup")
  • Unbrick.bat and respective folders.
  • Motorola Handset USB Drivers (x86 or x64).
  • ADB/ FASTBOOT or SDK.

Steps to revive:
  • Extract Unbrick.zip in "C:\atomSOC"
  • Go to unbrick folder. "C:\atomSOC\unbrick"
  • Go to your firmware folder and copy this files (dnx; ifwi)
  • Replace this files in "C:\atomSOC\unbrick".
  • Press CAMERA button and Plug in the USB to your phone (MEDFIELD FLASH)
  • Run unbrick.bat in "C:\atomSOC"

How Install "xFSTK-SoC-Driver-Setup":
  • Run Setup
  • When Say "Intel Soc Is about to begin" Click OK
  • When Say "In Order to Complete (...) Will a device be attached (...)" Press Yes.
  • When Say "Step 1 (...)" Plug In your USB Cable to the pc. and click ok
  • When Say "Step 2 (...)" Press CAMERA button and Plug in the USB to your phone (MEDFIELD FLASH)

¿How know if my phone go to the medfield flash method?
release the camera button, your phone will stay in a black screen with the green led.
And your pc says "New hardware recognized"
Name of hardware: MEDFIELD
Before the driver install:

Downloads:
Unbrick.bat + xFSTK-SoC-Driver-Setup Download
If it works.. please, let me know​
 
Last edited:
  • Like
Reactions: Dark2150 and max_choco
1

1994deano

New member
May 18, 2013
4
1
0
May 18, 2013 at 4:19 PM
Nope.

I just tried it, and it starts the download says a few numbers then carries on downloading.
Then the phone reboots and goes to the service required code corrupt screen
 
  • Like
Reactions: zertix
Boss442

Boss442

Senior Member
Jul 19, 2012
428
551
0
24
Mar Del Plata
May 20, 2013 at 9:10 PM
S***, REALLY GOOD NEWS.....
RDS recognizes your phone on Medfield Mode...

Someone try to flash a firmware ;)
Flashing Firmware dont work... ¿Maybe a custom XML Work?
 
Last edited:
M

mercurio.

Senior Member
Mar 31, 2011
119
43
0
May 22, 2013 at 3:34 PM
Bricked while flashing JB Radio to ICS

hy,

i did the stupid error of flashing a jb radio fw to a ics phone, now also with this tool i only get the message "service required / code corrupt"

anny idea?

btw.: i found a gui tool that does the same thing, there you can not only upload the firmware but also an operating system (you need a fw dnx and ifwi file and a os dnx and image file) anny idea where we could get the os files? i suppose flashing both (fw and dns) would unbrick the phone in all bricking cases.

i know it has already been said, but turn off your phone and keep the camera button pressed while connecting it (if you get the service required error). if the screen stays black just run the tool.

in my case flashing an ics fw dnx leads to the device corrupt message, and flashing a jb fw dnx leads to the black screen.
 
Last edited:
SharpnShiny

SharpnShiny

Senior Member
May 14, 2012
911
201
0
May 23, 2013 at 1:08 AM
Boss, you are a good man for trying to help other people. Getting something like this working in the community would be brilliant, as I've tried to communicate to others. The most help I got was from outside the RAZR i forum, most here just don't give a sh1t in helping others. I have created 2 help threads to guide people - information to help prevent further cases.

I have concluded the same - that 'unbrick.bat' fixes some problems and creates a far bigger one - the service required, code corrupt problem. I wasn't sure if I could say that directly but I've a lot of messages in my inbox about this and almost everyone arrived at that after using that unbrick. How that is still available is incredible, since it's the biggest brick-creator on here that I know.
 
Last edited:
Boss442

Boss442

Senior Member
Jul 19, 2012
428
551
0
24
Mar Del Plata
May 23, 2013 at 5:44 AM
mercurio. said:
hy,

i did the stupid error of flashing a jb radio fw to a ics phone, now also with this tool i only get the message "service required / code corrupt"

anny idea?

btw.: i found a gui tool that does the same thing, there you can not only upload the firmware but also an operating system (you need a fw dnx and ifwi file and a os dnx and image file) anny idea where we could get the os files? i suppose flashing both (fw and dns) would unbrick the phone in all bricking cases.

i know it has already been said, but turn off your phone and keep the camera button pressed while connecting it (if you get the service required error). if the screen stays black just run the tool.

in my case flashing an ics fw dnx leads to the device corrupt message, and flashing a jb fw dnx leads to the black screen.
Click to expand...
You can found Ifwi and dnx in your firmware folder... download a rds firmware and you found the two files. Upload and send me the gui-tool please!
So.. You cannot downgrading ifwi and dnx, but if you use ifwi and dnx (JB) with a ICS system, you got the black screen... so the black screen brick and "service required"brick are the same brick

SharpnShiny said:
Boss, you are a good man for trying to help other people. Getting something like this working in the community would be brilliant, as I've tried to communicate to others. The most help I got was from outside the RAZR i forum, most here just don't give a sh1t in helping others. I have created 2 help threads to guide people - information to help prevent further cases.

I have concluded the same - that 'unbrick.bat' fixes some problems and creates a far bigger one - the service required, code corrupt problem. I wasn't sure if I could say that directly but I've a lot of messages in my inbox about this and almost everyone arrived at that after using that unbrick. How that is still available is incredible, since it's the biggest brick-creator on here that I know.

Is your phone bricked in this condition right now? If it is, feel free to PM me.
Click to expand...
My phone isn't bricked, i know people that unbrick.bat work right, but some people brick your phone, so i know this is a "Most devices problem" (Firmware problem, work for people that IFWI and dnx are extracted from the same firmware that are using)
Unbrick.bat provides a tool can flash some files (IFWI & DNX) to the phone (These files are responsible for the brick) and i only im working with the same tool that can solve the problem, unbrick.bat (or xFSTK-Downloader) is a good tool, but the use brick the phone, example: if i solve my downgrading brick , and i upload my files (Unbrick.bat with ifwi and dnx) this work only for people with use my firmware (example: Orange ICS), for other people that uses other firmware (Claro Argentina) the phone bricks and show "Service required blah blah blah" im trying to go back to the original "ifwi and dnx" files, some people on other forums says that the phone dont show anymore the "service required" error... but the phone only shows a green led (same thing that downgrading brick).
xFSTK-Downloader is used to update the Orange sandiego (First Intel Atom android, dont use fastboot) and Ienovo pad (Use xFSTK-Downloader-GUI, and a "Flashtool").
xFSTK-Downloader is like a Odin for intel phones. sorry for my english but if you know spanish pm me and can explain more

I read 80 pages in modaco for intel san diego and 40 for Ienovo pad, and they uses xFSTK-Downloader to update the phones.
 
Last edited:
M

mercurio.

Senior Member
Mar 31, 2011
119
43
0
May 23, 2013 at 7:45 AM
Boss442 said:
You can found Ifwi and dnx in your firmware folder... download a rds firmware and you found the two files. Upload and send me the gui-tool please!
So.. You cannot downgrading ifwi and dnx, but if you use ifwi and dnx (JB) with a ICS system, you got the black screen... so the black screen brick and "service required"brick are the same brick



My phone isn't bricked, i know people that unbrick.bat work right, but some people brick your phone, so i know this is a "Most devices problem" (Firmware problem, work for people that IFWI and dnx are extracted from the same firmware that are using)
Unbrick.bat provides a tool can flash some files (IFWI & DNX) to the phone (These files are responsible for the brick) and i only im working with the same tool that can solve the problem, unbrick.bat (or xFSTK-Downloader) is a good tool, but the use brick the phone, example: if i solve my downgrading brick , and i upload my files (Unbrick.bat with ifwi and dnx) this work only for people with use my firmware (example: Orange ICS), for other people that uses other firmware (Claro Argentina) the phone bricks and show "Service required blah blah blah" im trying to go back to the original "ifwi and dnx" files, some people on other forums says that the phone dont show anymore the "service required" error... but the phone only shows a green led (same thing that downgrading brick).
xFSTK-Downloader is used to update the Orange sandiego (First Intel Atom android, dont use fastboot) and Ienovo pad (Use xFSTK-Downloader-GUI, and a "Flashtool").
xFSTK-Downloader is like a Odin for intel phones. sorry for my english but if you know spanish pm me and can explain more

I read 80 pages in modaco for intel san diego and 40 for Ienovo pad, and they uses xFSTK-Downloader to update the phones.
Click to expand...
I found out that the tool I ment is the xFSTK-Downloader ( rghost.net/44421368 ) that was alreaddy linked here at xda by U1138 in: http://forum.xda-developers.com/showthread.php?t=2184877

And yes, i suppose the black screen only and the service required brick are the same. they probably are due to a not working combination of firmware (ifwi & dnx) and flashed OS (i suppose the fastboot, no idea how where to get the dnx file needed for flashing it). you can try different ifwi and dnx files and get different results (so far i think there are only two types, the ones for JB fw and the others for ICS).

If you flash your rom with RSD going from JB to ICS you also flash the ifwi & dnx files, but not the bootloader. Therefore you end up with a non working combination of firmware (ifwi) and OS (fastboot) => nothing starts at all.

This problem was easy to fix for me flashing the appropriate JB firmware.

Then I did the mistake of flashing the JB radio before flashing a JB rom. This lead to a situation where neither the JB (leads to service required warning) nor the ICS (black screen, green led on) firmware works anymore and I have no idea how i could change the situation.

Anyone has some ideas how to flash the fastboot with the xFSTK-Downloader?
 
  • Like
Reactions: Boss442
You must log in or register to reply here.

New posts

Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone