Unlock Bootloader on Doogee s96 pro and root

Search This thread

totallyfreak

Member
Sep 29, 2012
30
1
Is there anyway to unlock the bootloader on this device.... each time i try to send the command :

PS D:\_DOOGEE S90 Pro_\ROOT> fastboot oem unlock
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed

is there any solution... i want to root my device but none of the tutorial i found on the web is working


thx
 
  • Like
Reactions: jacquiht

lopestom

Senior Member
  • Nov 7, 2012
    709
    484
    Archland - Narnia
    mewe.com
    Is there anyway to unlock the bootloader on this device.... each time i try to send the command :

    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot oem unlock
    FAILED (remote: 'Command not supported in default implementation')
    fastboot: error: Command failed

    is there any solution... i want to root my device but none of the tutorial i found on the web is working


    thx
    0. We answer the question, do we need it at all? If necessary, then why?
    1. If the answer to the first item is positive, then go to the settings, to the "About phone" item, twist to the very bottom and poke at the "Build number" item many times, so we will unlock the "For Developers" menu.

    2. We go back to the settings and go to the "System" section, there is the subsection "For Developers" we are looking for, go to it

    3. Immediately we stumble upon the item "Factory unlocking", it is for the sake of it that we are doing all this now. We press, we agree with what they scare us.

    3.1. Below is the item "Debugging via USB", we also click it, one day we will need it.

    4. When flashing through adb, you will need to register the command below, and only after that do:
    Code:
    fastboot devices
    If okay so the number Serial appears
    Unlock
    Code:
    fastboot flashing unlock
    See device screen and follow instructions.

    TWRP 3.4.0: Doogee S96 Pro
     

    totallyfreak

    Member
    Sep 29, 2012
    30
    1
    yes all the things is done... oem unlock is turned on
    usb debugging is turned on

    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot devices
    S96PROEEA0000013829 fastboot
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot flashing unlock
    FAILED (remote: 'Unrecognized command flashing unlock')
    fastboot: error: Command failed
     

    totallyfreak

    Member
    Sep 29, 2012
    30
    1
    the oem is set to unlock eom... the usb debug is set on also... i still got this error message


    PS D:\_DOOGEE S90 Pro_\ROOT> adb reboot fastboot
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot reboot fastboot
    Rebooting into fastboot OKAY [ 0.000s]
    < waiting for any device >
    Finished. Total time: 12.349s
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot devices
    S96PROEEA0000013829 fastboot
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot flashing unlock
    FAILED (remote: 'Unrecognized command flashing unlock')
    fastboot: error: Command failed
    PS D:\_DOOGEE S90 Pro_\ROOT>
     

    lopestom

    Senior Member
  • Nov 7, 2012
    709
    484
    Archland - Narnia
    mewe.com
    o oem está configurado para desbloquear o eom ... o usb debug também está ativado ... ainda recebo esta mensagem de erro


    PS D: \ _ DOOGEE S90 Pro_ \ ROOT> adb reboot fastboot
    PS D: \ _ DOOGEE S90 Pro_ \ ROOT> fastboot reinicializar fastboot
    Reinicializando no fastboot OKAY [0.000s]
    <esperando por qualquer dispositivo>
    Finalizado. Tempo total: 12.349s
    PS D: \ _ DOOGEE S90 Pro_ \ ROOT> dispositivos fastboot
    S96PROEEA0000013829 fastboot
    PS D: \ _ DOOGEE S90 Pro_ \ ROOT> desbloqueio de flashing de inicialização rápida
    FALHA (remoto: 'Comando não reconhecido desbloqueio intermitente')
    fastboot: erro: falha no comando
    PS D: \ _ DOOGEE S90 Pro_ \ ROOT>
    .
     
    Last edited:

    lopestom

    Senior Member
  • Nov 7, 2012
    709
    484
    Archland - Narnia
    mewe.com
    no its doogee s96 pro... my folder is wrong named... i run on android 10
    My device has A10 too. I made simple steps to Unlock these:
    • In the device SO:
    - OEM Unlock - select​
    - USB Debugging - select​
    cmd command for know if adb work:​
    Code:
    adb devices
    If okay:​
    Code:
    adb reboot bootloader
    (or use the menu option).​
    • The screen should show "FASTBOOT mode" at the bottom of the screen in small font:

    cmd command for know if fastboot work:​
    Code:
    fastboot devices
    If okay:​
    Code:
    fastboot flashing unlock
    or​
    Code:
    fastboot flashing unlock_critical
    Read phone screen for instructions.​
    You will have to press volume up key to continue to unlock.​
    cmd command for reboot device:​
    Code:
    fastboot reboot
    Your device unlocked when you read the message in the device screen: Orange State
     

    totallyfreak

    Member
    Sep 29, 2012
    30
    1
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot devices
    S96PROEEA0000013829 fastboot
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot flashing unlock_critical
    FAILED (Write to device failed (no link))
    fastboot: error: Command failed
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot flashing unlock_critical
    FAILED (Write to device failed (no link))
    fastboot: error: Command failed
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot flashing unlock
    FAILED (Write to device failed (no link))
    fastboot: error: Command failed
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot devices
    S96PROEEA0000013829 fastboot
    PS D:\_DOOGEE S90 Pro_\ROOT>

    i realy dont know what to do... adb is installed correctly and the oem unlock and usb debug is checked
     

    lopestom

    Senior Member
  • Nov 7, 2012
    709
    484
    Archland - Narnia
    mewe.com
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot devices
    S96PROEEA0000013829 fastboot
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot flashing unlock_critical
    FAILED (Write to device failed (no link))
    fastboot: error: Command failed
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot flashing unlock_critical
    FAILED (Write to device failed (no link))
    fastboot: error: Command failed
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot flashing unlock
    FAILED (Write to device failed (no link))
    fastboot: error: Command failed
    PS D:\_DOOGEE S90 Pro_\ROOT> fastboot devices
    S96PROEEA0000013829 fastboot
    PS D:\_DOOGEE S90 Pro_\ROOT>

    i realy dont know what to do... adb is installed correctly and the oem unlock and usb debug is checked
    Put the screenshot from your device:
    - OEM Unlock and USB Debugging - - selected

    Install Drivers: https://mega.nz/file/pGATVSrY#uOgE2wXIvQoNqcDoPEbiK5VWO9cqC0RhjL4WJE-WOkY

    Try.

    Maybe need more? Unzip adb&amp;amp;driver+installer.rar and install driver.
    Use the adb from folder adb&driver installer\adb\ and try.

    PS: Do not use fastboot reboot fastboot because it goes to fastbootD.

    bootloader => fastboot <= this is a normal fastboot

    fastbootD => advanced fastboot only for Super partitions
     

    Attachments

    • adb&amp;amp;driver+installer.rar
      11.5 MB · Views: 11
    Last edited:

    SrEstegosaurio

    New member
    May 6, 2021
    2
    0
    Ey,

    I was triying to install TWRP, but I had many problems with Orange? or whatever and the fact that I wasn't able
    to found any .img file to install TWRP. If someone can give me a link or a little help it would be amazing.

    Thanks.
     

    SrEstegosaurio

    New member
    May 6, 2021
    2
    0
    0. We answer the question, do we need it at all? If necessary, then why?
    1. If the answer to the first item is positive, then go to the settings, to the "About phone" item, twist to the very bottom and poke at the "Build number" item many times, so we will unlock the "For Developers" menu.

    2. We go back to the settings and go to the "System" section, there is the subsection "For Developers" we are looking for, go to it

    3. Immediately we stumble upon the item "Factory unlocking", it is for the sake of it that we are doing all this now. We press, we agree with what they scare us.

    3.1. Below is the item "Debugging via USB", we also click it, one day we will need it.

    4. When flashing through adb, you will need to register the command below, and only after that do:
    Code:
    fastboot devices
    If okay so the number Serial appears
    Unlock
    Code:
    fastboot flashing unlock
    See device screen and follow instructions.

    TWRP 3.4.0: Doogee S96 Pro
    Ey,
    Do you have a mirror link to the TWRP?
    Because that one is 404... And i'm stuck in the process, I wasn't able to found it anywhere else on thi internet.
    I will be very helpfull.

    Thanks.
     

    lopestom

    Senior Member
  • Nov 7, 2012
    709
    484
    Archland - Narnia
    mewe.com
    Ey,

    I was triying to install TWRP, but I had many problems with Orange? or whatever and the fact that I wasn't able
    to found any .img file to install TWRP. If someone can give me a link or a little help it would be amazing.

    Thanks.
    In bootloader unlocked that's message is normal. So only information Orange State show your device has bootloader unlocked. Now you can help totallyfreak unlocking bootloader with more instructions.

    Ey,
    Do you have a mirror link to the TWRP?
    Because that one is 404... And i'm stuck in the process, I wasn't able to found it anywhere else on thi internet.
    I will be very helpfull.

    Thanks.
    As you read in the post #2 TWRP 3.4.0;

    Translate: READ - DOWNLOAD Files - FOLLOW Instructions.
     
    Last edited:

    Mega-Flo

    New member
    Jun 5, 2021
    3
    0
    Hi folks! I'm new here and Ihave a question about install TWRP on my Doogee S96 pro. In the past I rooted nearly all my phones...first Sony then some Xiaomi's.
    Now I'm at the step to install TWRP via fastboot. The bootloader is unlocked and I see every time the orange state warning. If I install the TRWP image I see no failure. All is fine. But if I reboot to recovery I come to the stock recovery. I'm using the TWRP from here and nothing else I changed.
    Is it possible I made a mistake for example I must rename the TWRP recovery.img? Or I must delete some user data?

    And by the way...Doogee and updates. Anybody knows wheter android 11 is sheduled for the S96? Or is there a custom rom of Android 11?

    I hope my question is clear!? I apologize in advance for any misunderstandings. Please ask me if i forgot some helpful information.

    Greetings!
     

    Top Liked Posts

    • There are no posts matching your filters.
    • 1
      Is there anyway to unlock the bootloader on this device.... each time i try to send the command :

      PS D:\_DOOGEE S90 Pro_\ROOT> fastboot oem unlock
      FAILED (remote: 'Command not supported in default implementation')
      fastboot: error: Command failed

      is there any solution... i want to root my device but none of the tutorial i found on the web is working


      thx