Unlock Huawei Modems and Routers Free

donci17

Member
Sep 11, 2020
13
0
1
So finally i found the solution !!! Use Windows 7 instead of Windows 10

Flashing the device with E5577s_usbload.bin will fail !!!

You need usblsafe-e5577s-321.bin which will preserve the NVRAM etc.. so the best way is

(1) flash E5577CS-321 with usblsafe-e5577s-321.bin with Balong USB loader (shorten Boot Pin to ground), Balong will detect a special port BOOT_3G

COM9 - HUAWEI Mobile Connect - 3G PC UI Interface [BOOT_3G]
USB\VID_12D1&PID_1443&REV_0001
USB\VID_12D1&PID_1443

after successful flash 2 additional ports will appear
3G_Application
3G_PC UI

(2) run E5573_Update_WEBUI_17.100.11.00.03_Mod1.4.exe
(3) run putty and issue ATI, if IMEI is 0000000

ATI

Manufacturer: huawei
Model: E5577Cs-321
Revision: 21.180.99.03.00
IMEI: 000000000000000
+GCAP: +CGSM,+DS,+ES

then set your IMEI and serial (IMEI with "")
at^cimei="86xxxxxxx"
at^sn=D2xxxxx

the device will prompt with OK.

Now your device has the the firmware but NO dashboard and a special firmware. I found in the net a patched version which also supports Telnet


(4) flash E5577Cs-321_Update_21.316.01.01.778_M_AT_04.01.exe (if you don't see the Com-Ports you need again to load usblsafe-e5577s-321.bin without erasing the NVRAM

(5) flash E5573_Update_WEBUI_17.100.11.00.03_Mod1.4.exe (if you don't see the Com-Ports, flash the device again with usblsafe-e5577s-321.bin

In normal condition, the device acts as Hotspot, to turn the COM Ports on you need a script called Open PC UI Interface.cmd, i should also work with
192.168.8.1/html/switchProjectMode.html

Now my device is free of any simlock and working...

I wil put everything into a package...

NEVER use the usbload.bin which erases your NVRAM as you can just download ONE piece of software (Firmware or dashboard) and if you flash the normal usbloader, IMEI and the software is reset...
 

PietoTen

New member
Oct 3, 2020
2
0
0
22
Please give download link. I haven't easy-firmware premium account....

Downloads - > FIRMWARE - > HUAWEI - > HUAWEI Firmware - > HUAWEI E-SERIES - > E5573S-320

E5573s-320 -E5573_21.333.63.00.1072
E5573s-320 - E5573_21.333.07.00.00

I need two files
Please send any direct link sites ???
 

anakrantau

Member
Oct 13, 2010
13
2
0
Downgrade E5577s-321_Update_21.200.05.00.00_Universal.
Putty-> AT^NVRDEX=50503,0,128

Write the result here or in a private message. I'll help you unlock it.
Hi, can you help me unlock with my router too?
Found modem: E5577s-932
Model: Huawei E5577
IMEI: 352811048498319
Serial NR. : 0123456789ABCDEF
Firmware: 21.200.09.00.76
Compile date / time: Oct 9 2015 15:36:49
Hardware ver. : CL1E5577SM
Dashboard version: WEBUI_17.100.09.01.76_MRE5
Web UI version: WEBUI_17.100.09.01.76_MRE5
SIM Lock status: Locked (Card Lock)
 

arsenal65

Member
Jul 10, 2016
19
0
1
Hi, can you help me unlock with my router too?
Found modem: E5577s-932
Model: Huawei E5577
IMEI: 352811048498319
Serial NR. : 0123456789ABCDEF
Firmware: 21.200.09.00.76
Compile date / time: Oct 9 2015 15:36:49
Hardware ver. : CL1E5577SM
Dashboard version: WEBUI_17.100.09.01.76_MRE5
Web UI version: WEBUI_17.100.09.01.76_MRE5
SIM Lock status: Locked (Card Lock)
Putty-> AT^NVRDEX=50503,0,128
Write the result here or in a private message. I'll help you unlock it.
 

filauro1989

New member
Oct 17, 2020
1
0
0
E3372h-153

Here we go... I have got a Dongle E3372h-153... tried to flash it to install a modded UI with port forwarding... now im stuck with the green light flashing (i suppose download mode)
ALready tried the EXITdownload.exe, after that it starts again with flashing....
Already tried pin reset with a metal thing and then Balong and it doesnt work
Already tried to upgrade firmware several times with different versions but im always stuck on error 13/19
plz help me XD
 

Anandasri2

Member
Oct 19, 2020
11
0
0
If you have any challenge in unlocking your modems or routers, just post below and i will try to check them out.
cheers.[/QUOTE]

Help unlock huawei HWD14
no way to putt NCK , no information on internet , Putty erro, DC unlocker not support .if found NCK how do i use that ? firmware update?? but where? this is real challenging for me :D
tks
ATI

Manufacturer: Huawei Technologies Co., Ltd.
Model: HWD14
Revision: 11.232.03.10.824
IMEI: 3528980453****
+GCAP: +CGSM

OK
AT^NVRDEX=50503,0,128

ERROR
 

dambon

New member
May 3, 2019
1
0
0
Hey! I have a locked Huawei dongle (I think it is an E585) and no matter what code generator I try, no code will work. Can you help me out?

IMEI: 352398042361321

Thanks
 

theboss70

New member
Mar 24, 2014
0
0
0
NVRAM erasing

I tried to unlock vodafone R216 (huawei e5573bs) and I was so smart that I didn't read that I shouldn't load the usbloader.bin with balong tool, so I erased the NVRAM. I did not find any fix for that issue on this thread. I could fix the S/N, IMEI, MAC, SSID and WiFi password using DC unlocker, but when I write the command "AT^NVRDEX=50503,0,128" or "AT^NVRDEX=50502,0,128" I get only zeroes. I'd appreciate your help if its reparation is possible. I also succeded to install the WebUI.

I've tried to install different firmwares but none of them work.

AT^NVRDEX: 50503,0,128,00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
OK

Thanks in advance
 

lostindark

Senior Member
May 23, 2008
90
5
0
Sofia
Hi, is there some to help with my 4G USB Modem, Network locked?

Found modem : E3372
Model : Huawei E3372h
IMEI : 865035038664371
Serial NR. : G4PDU17B25000068
Firmware : 22.329.63.00.86
Compile date / time : Apr 19 2018 15:25:26
Hardware ver. : CL2E3372HM
Dashboard version : WEBUI_17.100.20.00.86_HILINK
Web UI version : WEBUI_17.100.20.00.86_HILINK
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 0 (unlock attempts left : 10)

Thanks in advance.
 

bramastaryou

New member
Nov 11, 2020
1
0
0
Hi Everyone,
I already unlocked my Huawei B310s-927 bolt4g (Indonesian) using putty method, and now its running. But the problem is, when i tried to use different provider services, it only show 3G signal, i tried to select radio manual, and it shows the 4G signal, but when i choose the 4G signal, it says failed. I also tried to select network into 4G only, and my B310s shows no signal. In the other hand, my phone which using same provider serices get the 4G signal.
Please help, what should i do ?
sorry for my bad english