Unlocking Jiofi M2 Pegasus Router (WIP) JioFi 2

Search This thread

ptfz108

New member
Apr 8, 2018
1
0
different query - wi fi disk

jio fi has wi fi disk feature to share memory card stuff. i want to completely bypass the verfication for sharing stuff. so i kept wifi password - 'open', named my jio fi wifi same as ip address, BUT i am stuck at the login page to share where it insists on entering both details - admin id and password. is there any way to remove this verfication. please note there is no sim in jiofi , i am just using it to share files.
 

jime1

Senior Member
Jul 27, 2013
627
81
Center
chipset details of all

Hello guys,

Can you please tell me where can I find all the spec details like chip set, RAM, ROM etc of all the jiofi devices ?
All as in jiofi 1, jiofi 2 ..M2 & M2S.. , jiofi3 ..jmr814 & jmr815.. , jiofi4, jiofi5, jiofi6 and any other if I missed any.

Kindly help me out.
TIA
 

shammymz601

Member
Oct 12, 2011
7
1
any one found the stock firmware for jiofi m2 device

Hey guys,
looked into the jiofi 520 bin file provided via binwalk.
there is this ACS provided by friendly tech hosted on jio

did any one notice that the pasw.htaccess file in the bin file.
seems the user name and authtoken are embedded there.

also if someone has linux machine try easycwmp client with jiofi as the hotspot and try to create the ACS (https://macs.oss.jio.com:8443/ftacs-digest/ACS) soap request.

can any of you atleast post the pegasus bin file link here??
 

kstj88

New member
Dec 19, 2018
1
0
firmware needed for Jiofi2 device

hi i have jiofi2 and i want to unlock it for internet service providers in India.
its current firmware is: PEG_M2_B37, product id: M2, hardware version : PEG_M2_D01
kindly send me the updated version of my device so that i can use it for all service providers.
my email is [email protected] or [email protected]
 

M4st3rZeus

New member
Nov 21, 2015
3
0
Can you send me link of firmware i have jiofi 2 firmware PEG_M2_B20 on charliback at gmail dot com
 

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    /** Dont Get Confused Between Jiofi 2 and Jiofi 3. This Thread is Exclusive for JioFi 2 M2 Unlocking ,
    If you Brick or Damage your JioFi Router then please don't blame me **/


    Hi Guys,

    I have been doing some research on the JioFi M2 Mobile Router from past few days. I new things have been discovered which were not known to us Before .

    New Updates 13.8.2017:
    Untitled_1.png

    New Updates 2.5.2017:
    I have Found the hardware Specs of the JioFi M2 Wifi Router by Disassembling it.
    Specs :

    • Cpu: Qualcomm mdm 9307
      Flash Chip: Nanya 1635
      Montherbroad: MF672S v3.1_B

    New Updates 1.5.2017:

    • This Router is a Android Device
    • Fastboot Mode is Available on this device ( Hold WPS + Power Button for 3 Secs ) Works Even without Battery inside
    • Fastboot Reboot and Fastboot Reboot Bootloader Working
    • Fastboot OEM Unlock is Showing Remote Unlock Not Allowed

    Currently my JioFi M2 is running on PEG_M2_B34 Firmware Version. I have tried Flashing JioFi_JMR520_R6.20.bin but its a FAILURE

    I am still trying to figure out if there is a USB Debugging mode so that we can reveal the Chipset and OEM of this Router.

    How Can you Help ME ??
    Ans : If you have the firmware file of Jiofi M2 Router then Please upload to a Dropbox or GDrive Drop the Link Below. I will try to unpack the .bin firmware and Repack and Flash.
    3
    Maybe that's the key, no SIM present = shell access? may have to try but adb was not available last time I checked. Or it may be that you are on an older firmware which allows shell access and you also seem to have root access !!(# sign for the shell but no network connectivity) and hence the reason it is trying to update.
    Can you please post your firmware and hardware versions from the admin webpage (192.168.1.1). I think with your device, the device can be reversed/hacked for plenty of additional features if we engage the right folks here with the skills in XDA.

    fastboot cannot reboot to recovery.

    .
    3
    Find UART pins for jiofi m2
    chrome_syxcMcFPQI.png

    use any ground as a GND pin connections


    if not then its QUALCOMM Mode

    if you get any shell access try this User - root Password - oelinux1 login shell



    cat /proc/mtd



    [email protected]:~# cat /proc/mtd
    dev: size erasesize name
    mtd0: 00140000 00020000 "sbl"
    mtd1: 00140000 00020000 "mibib"
    mtd2: 00b40000 00020000 "efs2"
    mtd3: 00240000 00020000 "foxnv"
    mtd4: 00100000 00020000 "tz"
    mtd5: 00080000 00020000 "rpm"
    mtd6: 000c0000 00020000 "aboot"
    mtd7: 000c0000 00020000 "aboot_bak"
    mtd8: 00720000 00020000 "boot"
    mtd9: 00420000 00020000 "scrub"
    mtd10: 02600000 00020000 "modem"
    mtd11: 02600000 00020000 "modem_bak"
    mtd12: 00080000 00020000 "sec"
    mtd13: 00120000 00020000 "misc"
    mtd14: 00720000 00020000 "recovery"
    mtd15: 00060000 00020000 "fota"
    mtd16: 000a0000 00020000 "fwinfo"
    mtd17: 02700000 00020000 "recoveryfs"
    mtd18: 00060000 00020000 "cache"
    mtd19: 00120000 00020000 "nvram"
    mtd20: 00a20000 00020000 "foxusr"
    mtd21: 008e0000 00020000 "foxcal"
    mtd22: 02980000 00020000 "foximg"
    mtd23: 02700000 00020000 "system"








    cat /dev/mtd0 > /sdcard/sbl.img

    cat /dev/mtd1 > /sdcard/mibib.img # not done
    cat /dev/mtd2 > /sdcard/efs2.img # not done


    cat /dev/mtd3 > /sdcard/foxnv.img
    cat /dev/mtd4 > /sdcard/tz.img
    cat /dev/mtd5 > /sdcard/rpm.img
    cat /dev/mtd6 > /sdcard/aboot.img
    cat /dev/mtd7 > /sdcard/aboot_bak.img
    cat /dev/mtd8 > /sdcard/boot.img
    cat /dev/mtd9 > /sdcard/scrub.img
    cat /dev/mtd10 > /sdcard/modem.img
    cat /dev/mtd11 > /sdcard/modem_bak.img
    cat /dev/mtd12 > /sdcard/sec.img
    cat /dev/mtd13 > /sdcard/misc.img
    cat /dev/mtd14 > /sdcard/recovery.img
    cat /dev/mtd15 > /sdcard/fota.img
    cat /dev/mtd16 > /sdcard/fwinfo.img
    cat /dev/mtd17 > /sdcard/recoveryfs.img
    cat /dev/mtd18 > /sdcard/cache.img
    cat /dev/mtd19 > /sdcard/nvram.img
    cat /dev/mtd20 > /sdcard/foxusr.img
    cat /dev/mtd21 > /sdcard/foxcal.img
    cat /dev/mtd22 > /sdcard/foximg.img
    cat /dev/mtd23 > /sdcard/system.img





    Then you can edit the build.prop directly from shell and add

    Code :
    persist.service.adb.enable=1
    persist.service.debuggable=1
    persist.sys.usb.config=mtp,adb

    After reboot it’ll enable adb

    Backup first it is important to keep firmware stock.
    2
    hello

    gimme Ur email... i have a link but xda is not allowing me to type a link here as i am new.... (Mod Edit - Email Removed)
    2
    Download link for firmware files extracted from /firmware directory

    https: // drive.google. com/ open?id=1wWsJHPC8C8gX2Sv5SaPQC7FqzFurAadz