Unofficial CM13.0 910F/G - NEW

agsola

Senior Member
Sep 17, 2012
563
756
0
Murcia
twitter.com
I'VE GOT NO TIME AT ALL RIGHT NOW DUE TO PERSONAL MATTERS. IF ANYONE FEELS LIKE BEING ABLE TO TAKE THIS OVER, PLEASE, SEND ME A PM.

This is a follow up from this (http://forum.xda-developers.com/note-4/snapdragon-dev/unofficial-cm13-0-910f-g-t3243386/post63707846).

Quite a few people asked for test driving CM13.0/Marshmallow. However since a lot of stuff was broken, we felt it didnt make much sense to put a flashable ROM out there. But a lot of progress has been made and the basic functionality (more or less) seems to work now, so I thought let's open a thread where people can dump their unofficial Cm13.0 versions for others to try.

If you want a stable version, use the official Cm12.1: http://forum.xda-developers.com/note-4/orig-development/official-cm12-910f-910g-t3046965

This thread will be active untill we feel it's stable enough to make it official.



Notes:
Bootloader and Modem:
Make sure you are (at least) on COI3 bootloader and modem.
I recommend that you install COJ3 and COL2, since the blobs used in the latest builds are from them. To do so, install these two files:
CP_N910F_COJ3.tar --> you can find it here: https://www.androidfilehost.com/?w=files&flid=41392
BL_N910F_COL2_agsola.tar --> I didn't find it anywhere, so I packaged it and upload it here: https://mega.nz/#!JtY1gb5Y!h2AKBC_j-kHiokh9EnnS-QV00-RWszqbq95dr2s8fCI (it works on my mobile, 910F)
See the post below for instructions about how to install it.

Installation instructions: (compiled for trltexx).
1) You'll probably want to backup your existing installation with TWRP
2) Do a full factory reset
3) Flash this ROM: https://goo.gl/VKHILd (date: 2016-04-11) -- older builds below.
4) Flash gapps from opengapps: http://opengapps.org (choose 6.0 and ARM)


Update from previous build:
1) Flash ROM.
2) Restart.

Working:


If you want to build it yourself, @fattire wrote this wonderful tutorial: https://wiki.cyanogenmod.org/index....ild_CM_Marshmallow_for_trlte_WORK_IN_PROGRESS

Other notes:
* You guys might want to try the Marshmallow multi window mode ! Enable it in the developer options. Once enabled, go to the recent apps and press the symbol next to the X for windows you want.
* You'll probably want to enable MTP over USB by default, also in developer options
* Enable root also, again, via developer options.

Known bugs/problems
* I've seen some battery drains, not sure if they still persist, I expect they do.
* Camera a bit buggy
* Display lights up dimmed for a few seconds and goes of then. Seems to be CM13 related. Press power twice fixes the problem.
* Probably a lot more

What do we need to get out of nightly?? (by fattire)
* Most importantly, selinux must be enabled/working before this can become an official nightly. You'll notice in the settings the ROM is still running in permissive mode. It took slayher a few days to make sure everything was good selinux-wise in 12.1-- has anyone tried "setenforce 1" in a root shell to see what happens? And what happens if you take permissive out of the kernel command line? I haven't tried it yet. I'm guessing there are no selinux experts in the crowd... which I'm certainly not.... anyone want to step up and learn how all those .te files work and be willing to tweak them if necessary? -- done by @fattire
* Another thing I haven't tried-- has anyone tried to make an emergency call with the phone locked? I don't recommend anyone trying to call 911 randomly, but this seems like something someone should verify as working as well. -- tested by agsola, works.
* I am thinking that the standard across devices seems to be to move the RIL file to the -common from the device flavor directory, as @ZION959 has already done. I can do this as well but I don't want to break the xx builds... anyone have any thoughts on this? -- done
* Can anyone think of any other obstacles to a nightly build? Well, the latest source would need to be uploaded to gerrit (Review.cyanogenmod.com) for the various devices. This is something anyone can do by the way...


KEEP IN MIND THAT THIS IS STILL HIGHLY EXPERIMENTAL AND NOT MEANT TO BE A DAILY DRIVER FOR THE AVERAGE USER AT THIS POINT

XDA:DevDB Information
Unofficial CM13.0 910F/G, ROM for the Samsung Galaxy Note 4

Contributors
agsola, fattire, gekkehenkie11, slather, jef_00 (any other??)
ROM OS Version: 6.0.x Marshmallow

Version Information
Status: Beta

Created 2015-12-28
Last Updated 2016-05-20
 

agsola

Senior Member
Sep 17, 2012
563
756
0
Murcia
twitter.com
Modems, bootloader, images...

To download the right bootloader and modem, see this post:
http://forum.xda-developers.com/note-4/general/snapdragon-note4-modem-bootloader-t3273816

(by Mussels84)
For 910G users, a compatible 5.1.1 modem is hosted here:
http://www.mediafire.com/download/he7mvjg9axmen3q/N910G_BOH4_Bootloader_Modem_5_1_1.rarBOH4 modems + bootloader in a single file.

If you need latest official version lollipop version (to get files and help with dev):
http://forum.xda-developers.com/note-4/general/910f-official-lolipop-germany-dbt-t3029508
 
Last edited:

agsola

Senior Member
Sep 17, 2012
563
756
0
Murcia
twitter.com
Older builds links

https://goo.gl/HVN7fb (date: 2016-04-24 - New Marshmallow kernel, Bluetooth not working)
https://goo.gl/VKHILd (date: 2016-04-11)
https://goo.gl/aJvQdf (date: 2016-03-20)
https://goo.gl/ToqL1j (date: 2016-03-19)
https://goo.gl/0jn9Cq (date: 2016-03-09)
https://goo.gl/0Umf17 (date: 2016-03-06)
https://goo.gl/pnk3iy (date: 2016-02-28)
https://goo.gl/EiOH0n (date: 2016-02-27)
https://goo.gl/mF95rF (date: 2016-02-22)
https://goo.gl/7HpNSC (date: 2016-02-21) fingerprint working SELInux enforced
https://goo.gl/N9AvQ6 (date: 2016-02-18) fingerprint working, but with some drawbacks (see http://forum.xda-developers.com/showpost.php?p=65391708&postcount=1113)
https://goo.gl/XNRqPe (date: 2016-02-13)
https://goo.gl/Hpz4nD (date: 2016-02-12)
https://goo.gl/kAsgQS (date: 2016-02-10)
https://goo.gl/14IkzH (date: 2016-02-07)
https://goo.gl/KZBD6k (date: 2016-02-02)
https://goo.gl/NVbMgh (date: 2016-01-25)
https://goo.gl/WbsqNf (date: 2016-01-23)
https://goo.gl/JHZGwO (date: 2016-01-22)
https://goo.gl/ogzh10 (date: 2016-01-21)
https://goo.gl/gvTvDg (date: 2016-01-19)
https://goo.gl/eLeAOt (date: 2016-01-17)
https://goo.gl/3kuqkb (date: 2016-01-16)
https://mega.nz/#!RkxUzZZC!s4C8pZQnIgv9iyAFwckMT0kaBzQvbvjsRIj0y7D7Cl0 (date: 2016-01-15)
https://mega.nz/#!lhJWDCSa!4cgUZocbE30fHLG5KzLyaeDUHSfIwIHTadiUk_Tg47k (date: 2016-01-12)
https://mega.nz/#!QsZGyJDb!TaXz8tEFM4YjquE0DNtDLPlpuuRhasHMJMA5VjnbTEU (date: 2016-01-07, CPUSETs now should work)
https://mega.nz/#!U9JQxRJL!YR_9G3Zv4m_-RXF2jSebAn0pH8wTovB3PJIue-J9Df8 (date: 2016-01-06, SELinux Enforced, SD fix?? --> includes this commit: http://review.cyanogenmod.org/#/c/126220/)
https://mega.nz/#!l9AnFBTR!HN8gGchJbXgg_sOO2MybO9vV7um7BnZtK_Ld7QI2MNY (date: 2016-01-05, SELinux Enforced, no SD fix??)
https://mega.nz/#!VlBhEa4R!TistCKpTPcgoJGM15AwvFYmzaY_CRs57Gt_CzW1jxaY (date: 2016-01-03, SELinux Enforced)
https://mega.nz/#!MgZ3hILJ!lwRWApA85gan2lfxhN7T9OlgHyAxeMD3_rnJIx02vPo (date: 2016-01-01, SELinux Enforced, blobs updated to COJ3 modem)
https://mega.nz/#!NlZyWKYJ!1-MD3sX2C48ojqKdXSr9WvwKjHI7phfYS3UDN6LOMNQ (date: 2015-12-31, SELinux Enforced)
https://mega.nz/#!opBQHQJK!WnmhGiF-2_Y6GjjirXqqcE5XA-QoQC5aV8IzZ_4n_-8 (date: 2015-12-29) - SELinux permissive.
 
Last edited:

Mussels84

Senior Member
May 18, 2013
4,094
1,774
243
For 910G users, a compatible 5.1.1 (COL2) modem and bootloader for CM13 is hosted here:
https://mega.nz/#!xMNkCZTY!UYE-gySDzfqfSjy4dL_pWrBpLaZzWCwTYWcDX8NDPJQ

The following are newer 6.0.1 Modem/BL combinations that are helpful on newer roms like Emotroids AOSP ROM. Different ROM versions work better with different modems, test and find out what is best for you.

https://mega.nz/#!tddkzZYI!p_aMpniVRHAgVDfIzxq5_yq58btKUWhOe9QbJisMLv0
http://d-h.st/WMht

910G PG1 modem + BL (6.0.1)
https://www.androidfilehost.com/?fid=24591000424948865

910G DPI1
https://www.androidfilehost.com/?fid=457095661767098866




***************910F modem/bootloaders:***************

6.0.1 Modems (good for emotrdroid AOSP)
Modem DPB1

(5.x stuff, good for CM13)
(From the OP, just so that its all in one post)
Notes:
Bootloader and Modem:
I recommend that you install COJ3 and COL2, since the blobs used in the latest builds are from them. To do so, install these two files:
CP_N910F_COJ3.tar --> you can find it here: https://www.androidfilehost.com/?w=files&flid=41392
BL_N910F_COL2_agsola.tar --> I didn't find it anywhere, so I packaged it and upload it here: https://mega.nz/#!JtY1gb5Y!h2AKBC_j-kHiokh9EnnS-QV00-RWszqbq95dr2s8fCI (it works on my mobile, 910F)



**********Recovery******************
This is if the official TWRP recovery for 910F and 910G
https://dl.twrp.me/trltexx/ 910F
https://dl.twrp.me/trltedt/ 910G "India" (i've asked the TWRP guys to clarify that, but apparently australia doesnt exist to them)
 
Last edited:

Deraoui

Member
Jun 12, 2009
10
1
0
Been using it since 1512 build. Works great!! Thnx again for making this possible.
One thing that bothers me is the fingerprint scanner not working but I guess we'll have to be patience.
But other than that great ROM
 

Redmanha

Senior Member
Oct 17, 2008
475
177
63
Hallstadt
@agsola: Many thx for your work to bring our Note4 CM13!!! :good: Keep going on. Respect to all your work to all the devs here...

If you need a tester pm me.... (I'm in germany and my provider is T-Mobile Germany)
 
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone