• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[UNOFFICIAL] crDroid R Mod //crDRom11

Search This thread

eremitein

Senior Member
May 16, 2017
1,133
1,418
Xiaomi Mi A2 Lite
crDroid 7.11


Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you


crDRom 11 is a project which based on crDroid 7.x with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method) and in the Recovery do Wipe Data

UPDATE VERSION
base: crDroid 7.11
latest build: 2021.10.13
treble patches: v313+
SPL: 1 Oct 2021

FEATURES/CHANGES
see Project page changelog

DOWNLOAD (CLICK H3RE)
vanilla, gapps, go-gapps: all possible architectures

NAMING
Some information you should know about knowing what type of gsi it is

<ARCH>_xyZ

<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S

b = a/b
a = a-only

g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)

N = no superuser
S = superuser included
Z = dynamic superuser included

-lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)

so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser

CONTACTS
> telegram group
> project page

KN0WN BUGS
• excluding fixes, the same as on all R GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally; problems with GPS etc etc)
NOTE: always test ROM first without Magisk (with clean boot.img). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)


CREDITS
persons: @phhusson, @AndyYan
projects: TrebleGSI • BlissROMs • LineageOS • Havoc-OS • PixelExperience • ABC Rom • GrapheneOS • SyberiaOS
 
Last edited:

GroovyG

Senior Member
Jan 18, 2011
190
65
Quite simply the best ROM ever. Lean, fast, no bugs, customizable to the last item.
I might hit 35h SOT on the BV9100 with this, the WP6 is heading for 25h :ROFLMAO:
 
  • Like
Reactions: hacker812c

pryggi

Senior Member
Aug 27, 2015
371
206
Xiaomi Poco F1
Hi, thanks a lot for the rom. Works fine on Poco X3 Pro. So far have noticed only some small cosmetic issues, like charging info on the lockscreen seems incorrect, although it charges fast, under 2h to full. Widevine is reported as L3 in Netflix, thus only SD playback is available.
Screenshot_20210506-173001564~2.jpg
 
  • Like
Reactions: hacker812c

eremitein

Senior Member
May 16, 2017
1,133
1,418
Xiaomi Mi A2 Lite
Hi, thanks a lot for the rom. Works fine on Poco X3 Pro. So far have noticed only some small cosmetic issues, like charging info on the lockscreen seems incorrect, although it charges fast, under 2h to full. Widevine is reported as L3 in Netflix, thus only SD playback is available. View attachment 5301523
for Netflix try to find "ro.netflix.bsp_rev" from your stock rom and add this prop to gsi
 

UpperCenter

Member
May 12, 2018
10
0
OnePlus 7 Pro
Hey, thanks for this release! I have been using crDroid 6 on Redmi Note 9 (Merlin) with very few issues. I updated today, but I am getting low fps and small stuttering in the UI. Is there any settings I can check to fix this?

Thanks

Edit: I have tried arm64-bgZ and arm64-bvZ-lite with no change.
 
Last edited:

eremitein

Senior Member
May 16, 2017
1,133
1,418
Xiaomi Mi A2 Lite
Hey, thanks for this release! I have been using crDroid 6 on Redmi Note 9 (Merlin) with very few issues. I updated today, but I am getting low fps and small stuttering in the UI. Is there any settings I can check to fix this?

Thanks

Edit: I have tried arm64-bgZ and arm64-bvZ-lite with no change.
hi, yes i guess you need check option Display > Blur (should be disabled) and also try to add in the /system/build.prop new line "debug.sf.latch_unsignaled=1"
say me, which treble base (kernel & vendor) used and if suggestions helped you
 

eremitein

Senior Member
May 16, 2017
1,133
1,418
Xiaomi Mi A2 Lite
Hi folks, as you maybe know all my GSI works suspended
Build server damaged and now for maintenance, I haven't information about his further fate
So... I don't know when I can resume my GSI building

By the way, this is not my server, literally I can't do anything to help
I can't even send money, my country is not supported in many payment systems

If you want to help, you can send donations to https://www.paypal.com/paypalme/electrikjesus
(he is the owner of the server, and he long gives me his server - I made a lot of GSI builds on it)
 
  • Like
Reactions: Pat750

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    2
    Just a quick follow up from my port (#33), after I installed phhusson's AOSP 11.0 v313. All issues I reported besides #2 and #6 also happen with vanilla AOSP, #2 is related to the crDRom11 while #6 is just generic (it would happen with any ROM).
    I was able to build an overlay for FIG-LX1 and battery seems to be OK, not as good as stock ROM tho, but I think this is expected. I downgraded the stock system to EMUI8 so I could use the Aonly version, but it seems that some NFC service keeps crashing all the time, slowing down the whole system after a while, and also demanding more battery. So I moved to EMUI9 again and installed the AB version. (small parenthesis here: EMUI8 is Aonly = SAS = System as System, while EMUI9 is AB = SAR = System as Root, at least on FIG-LX1)
    The main problem that remains is the cell signal, what is broken. It seems that there is workaround using in some other ROM, but I have found it only on Android Q (A10) ROMs, not A11. If anyone has any tip on how to fix it on Android R ROMs it would be great.
    There is another minor issue with cdDRom that I forgot: the Simple Gallery app included is not signed using the same keys as the F-Droid version, so it is not possible to update the app easily. Not a big deal, but I wonder why the F-Droid version wasn't used.
    Thanks to @eremitein for all his builds again.
    i know for EMUI8 need patch AIO from @Hami_Do, it will fix NFC and other things
    1
    Thank you for the crdroid. Working fantastic on my v30+. Using with microg
    1
    Thanks for the fantastic ROM.
    1
    Thanks for updating. I found that "dumpsys media.aduio_{policy,flinger} issue I mentioned in the Caos R thread was fixed. My root script "USB SampleRate Changer (on the fly)" now can be executed by SuperUer as well as Magisk root.

    If you like, try "extras/jitter-reducer.sh" in its ZIP file to enjoy hifi music streaming services.

    Edit: "dumpsys media.aduio_{policy,flinger}" has not been fixed for MTK Oreo 8.1 vendor. Probably other devices are ok.
  • 15
    crDroid 7.11


    Your warranty is now void!
    We're not responsible for bricked devices, dead SD cards,
    thermonuclear war, or you getting fired because the alarm app failed. Please
    do some research if you have any concerns about features included in this ROM
    before flashing it! YOU are choosing to make these modifications, and if
    you point the finger at us for messing up your device, we will laugh at you


    crDRom 11 is a project which based on crDroid 7.x with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method) and in the Recovery do Wipe Data

    UPDATE VERSION
    base: crDroid 7.11
    latest build: 2021.10.13
    treble patches: v313+
    SPL: 1 Oct 2021

    FEATURES/CHANGES
    see Project page changelog

    DOWNLOAD (CLICK H3RE)
    vanilla, gapps, go-gapps: all possible architectures

    NAMING
    Some information you should know about knowing what type of gsi it is

    <ARCH>_xyZ

    <ARCH> can either be arm, a64 (arm32_binder64) or arm64
    x can either be a or b
    y can either be v, o, g or f
    Z can be N or S

    b = a/b
    a = a-only

    g = gapps
    o = gapps-go
    v = vanilla (no gapps included)
    f = floss (free & open source apps instead gapps)

    N = no superuser
    S = superuser included
    Z = dynamic superuser included

    -lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)

    so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser

    CONTACTS
    > telegram group
    > project page

    KN0WN BUGS
    • excluding fixes, the same as on all R GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally; problems with GPS etc etc)
    NOTE: always test ROM first without Magisk (with clean boot.img). and don't send me bug reports if you have:
    a) Magisk installed
    b) modified/custom vendor or kernel
    c) dirty flashing rom without wiping data
    d) modified props values (another device fingerprint and so on)


    CREDITS
    persons: @phhusson, @AndyYan
    projects: TrebleGSI • BlissROMs • LineageOS • Havoc-OS • PixelExperience • ABC Rom • GrapheneOS • SyberiaOS
    6
    6
    5
    4