• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[UNOFFICIAL][PORT][ROM] Blck/Cyanogenmod 11 (Android 4.4.4) SM-T700 16gb

Search This thread

eousphoros

Senior Member
Feb 8, 2010
908
2,237
San Francisco
(Release 10)

CyanogenMod (pronounced /saɪ.'æn.oʊ.dʒɛn.mɒd/) is an enhanced open source firmware distribution for smartphones and tablet computers based on the Android mobile operating system. It offers features and options not found in the official firmware distributed by vendors of these devices.

http://wiki.cyanogenmod.org/w/About

Code:
#include <std_disclaimer.h>

/*
 * Your warranty is now void.
 *
 * We are not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at us for messing up your device, we will laugh at you.
 *
 */

What works:
Pretty much everything

Downloads

SM-T700:
Cyanogenmod 11: https://blck.io/cm-11-20140912-UNOFFICIAL-klimtwifi.zip
CWM Recovery: https://blck.io/cwm-20140806-UNOFFICIAL-klimtwifi.img

SM-T800:
CWM Recovery: https://blck.io/cwm-20140802r2-UNOFFICIAL-chagallwifi.img

Source code

* CyanogenMod
https://github.com/CyanogenMod

* Device specific repos
https://github.com/eousphoros/android_device_samsung_klimtwifi.git
https://github.com/eousphoros/android_hardware_samsung_slsi_exynos5420.git
https://github.com/eousphoros/android_kernel_samsung_exynos5420.git
---
BTC: 1HviBeNeg8Scqw9g5LUzjXd2gGCDZBSzRr
 
Last edited:

sku||

Senior Member
Mar 28, 2012
208
22
I've only tested cwm

if you could port it to tab s 10.5
images
 
  • Like
Reactions: lonespeaker

suzook

Senior Member
Jan 25, 2010
4,475
1,177
Untested build for the 10.5 (16 GB). This will cause your device to break, brick, catch on fire, reduce its life span. I recommend you dont use it. If anyone does happen to use it, let me know how it goes.

https://blck.io/cm-11-20140802-UNOFFICIAL-chagallwifi.zip

https://blck.io/cwm-20140802-UNOFFICIAL-chagallwifi.img

No boot on 10.5. I just get some garbled leters, then a black screen.



---------- Post added at 08:36 AM ---------- Previous post was at 07:47 AM ----------

cwm is giving me black screen on my 10.5
 
Last edited:

ukael

Member
Jul 24, 2014
44
10
I would be willing to try this alpha build, but couldn't figure out how to install it.

My device is rooted, but I don't know how to install CWM recovery on it (ROM Manager doesn't recognise my device).

Also, why are there two different files for the build ?

It would be awesome if someone could post a foolproof step by step on how to install this ROM and et back to stock.

Thanks from advance and sorry for my newbyish questions, I just want to make sure not to break anything out of ignorance.
 
  • Like
Reactions: Crabitpig

suzook

Senior Member
Jan 25, 2010
4,475
1,177
I would be willing to try this alpha build, but couldn't figure out how to install it.

My device is rooted, but I don't know how to install CWM recovery on it (ROM Manager doesn't recognise my device).

Also, why are there two different files for the build ?

It would be awesome if someone could post a foolproof step by step on how to install this ROM and et back to stock.

Thanks from advance and sorry for my newbyish questions, I just want to make sure not to break anything out of ignorance.

There is one for the 8.4 and one for 10.5. The 10.5 is not currently working
 

ukael

Member
Jul 24, 2014
44
10
There is one for the 8.4 and one for 10.5. The 10.5 is not currently working

Sorry, I wasn't clear enough: I mean the two files provided in the first post. My understanding is the .zip would be the ROM itself, and the .img would be a custom CWM that I should use to install the ROM, is that correct ?

If it is, how should I proceed to install the .img file ?
 

suzook

Senior Member
Jan 25, 2010
4,475
1,177
Sorry, I wasn't clear enough: I mean the two files provided in the first post. My understanding is the .zip would be the ROM itself, and the .img would be a custom CWM that I should use to install the ROM, is that correct ?

If it is, how should I proceed to install the .img file ?

dd if=/sdcard/recoveryfilename.img of=/dev/block/platform/dw_mmc.0/by-name/RECOVERY
 
  • Like
Reactions: dcoulombe

Top Liked Posts

  • There are no posts matching your filters.
  • 48
    (Release 10)

    CyanogenMod (pronounced /saɪ.'æn.oʊ.dʒɛn.mɒd/) is an enhanced open source firmware distribution for smartphones and tablet computers based on the Android mobile operating system. It offers features and options not found in the official firmware distributed by vendors of these devices.

    http://wiki.cyanogenmod.org/w/About

    Code:
    #include <std_disclaimer.h>
    
    /*
     * Your warranty is now void.
     *
     * We are not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at us for messing up your device, we will laugh at you.
     *
     */

    What works:
    Pretty much everything

    Downloads

    SM-T700:
    Cyanogenmod 11: https://blck.io/cm-11-20140912-UNOFFICIAL-klimtwifi.zip
    CWM Recovery: https://blck.io/cwm-20140806-UNOFFICIAL-klimtwifi.img

    SM-T800:
    CWM Recovery: https://blck.io/cwm-20140802r2-UNOFFICIAL-chagallwifi.img

    Source code

    * CyanogenMod
    https://github.com/CyanogenMod

    * Device specific repos
    https://github.com/eousphoros/android_device_samsung_klimtwifi.git
    https://github.com/eousphoros/android_hardware_samsung_slsi_exynos5420.git
    https://github.com/eousphoros/android_kernel_samsung_exynos5420.git
    ---
    BTC: 1HviBeNeg8Scqw9g5LUzjXd2gGCDZBSzRr
    17
    Just a quick update. I have moved my development time to CM12.. Giving myself a little bit extra time this week to get something usable since my tablet is out of commission till I get it booting.
    12
    Made recovery image: /home/cmbuild/android/out/target/product/klimtwifi/recovery.img

    #### make completed successfully (02:59 (mm:ss)) ####

    Step one completed.

    I have cm12 (lollipop) recovery building. Now to fix the rest.
    12
    lollipop.jpg


    Here is a very EARLY development build of cm12 (android 5.0.1 lollipop) for the t700. Wifi/Screen/Sound mostly work. Probably not a daily driver but if you must have lollipop today here it is. (Thank you to @crpalmer who greatly accelerated getting my cm12 port running)

    https://blck.io/cm-12-20141206-UNOFFICIAL-klimtwifi.zip

    Gapps

    http://download.crpalmer.org/downloads/gapps/unofficial/gapps-lp-20141122-signed.zip
    11
    Thank you to @UpInTheAir for fielding the support while I've been busy trying to learn how to raise a human. Thought I would have more free time then I ended up having (and a lot more sleep). The rom isn't abandoned just suspended while I try to establish a new routine at the house. Hoping to be able to get back to this soon. (Maybe even tonight on my way home on the train)

    To those who hate this ROM, feel free to use that door over to the left. :)

    manifest.xml for cm11 with hwcomposer 1.3
    Code:
    <?xml version="1.0" encoding="UTF-8"?>
    <manifest>
      <remote  name="origin"
               fetch="https://github.com/codewalkerster/" />
      <remote name="githube" fetch="git://github.com/"/>
    
      <project path="hardware/samsung_slsi/exynos" name="android_hardware_samsung_slsi_exynos" remote="origin" revision="refs/tags/5422_4.4.2_v2.0" />
      <project path="hardware/samsung_slsi/exynos5" name="android_hardware_samsung_slsi_exynos5" remote="origin" revision="refs/tags/5422_4.4.2_v2.0" />
      <project path="hardware/samsung_slsi/exynos5420" name="android_hardware_samsung_slsi_exynos5422" remote="origin" revision="refs/tags/5422_4.4.2_v2.0" />
      <project path="hardware/samsung_slsi/openmax" name="android_hardware_samsung_slsi_openmax" remote="origin" revision="refs/tags/5422_4.4.2_v2.0" />
      <project name="eousphoros/android_vendor_samsung_klimtwifi.git" path="vendor/samsung/klimtwifi" remote="githube" revision="master"/>
      <project name="eousphoros/android_device_samsung_klimtwifi.git" path="device/samsung/klimtwifi" remote="githube" revision="aosp"/>
      <project name="eousphoros/android_kernel_samsung_exynos5420.git" path="kernel/samsung/exynos5420" remote="githube" revision="master"/>
    </manifest>