[UNOFFICIAL][ROM][9.0.0][davinci] LineageOS 16.0

Search This thread

d2244974

Member
Nov 29, 2019
5
0
Does any of the existing screen overclocking mods work on this custom rom? And if yes, what is the highest refresh rate you can run stable? (66hz-72hz-75hz) :)
 

pawcioo132

Senior Member
Dec 26, 2013
121
79
After flash this rom I can't boot in to system. Someone have this problem too maybe and know how to fix this ? Or maybe there is any requirements before flashing this rom ?
 

Leeward_Fr

Member
Oct 31, 2019
8
3
Hi, I need some help.

I've read the first 25 pages, and see some people have the same problem and find a issu. But not me.

In resume :
2 weeks ago, I have the 11.0.2.0 global version with TWRP and Magisk. All was fine.
I update the OTA 11.0.3.0 global and after reboot, I've lost TWRP and Magisk, but MIUI working.

Today, I try to install TWRP again. It was a little complicated, but it's OK. I can launch TWRP. But my problem is that. I can ONLY launch TWRP.

I try to install LineageOS 16.0-20190921 because I don't want Gapps and Xiaomi apps not interesting me (and I have a very good experience with my Nexus 5 with Cyanogenmod). Actually impossible to start OS. I can't install this.

This is some try :
Do all the first post (with wipe everything).
My TWRP version is in the link in the OP and launch with the .bat. (include "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img")
UPDATE - My TWRP version is 3.3.1-11
I've try install LineageOS with sideload and directly in the phone (with adb push command).
I've try with and without install Magisk.
I've try wipe dalvik after install LineageOS befor reboot system.

Actually, when I want to reboot system, TWRP note this : "No OS installed! Are you sure you wish to reboot?"
I've try to reinstall LineageOS, the same...
I've try to install MIUI 11.0.2.0, the same again (the 11.0.3.0 not work)...

I've notice this :
With adb sideload, the process finish on the phone before the 50% (and Total xfer: 1.00x on the prompt CMD). I have this message :"detected filesystem ext4 for /dev/block/bootdevice/by-name/system". Perhaps it's normal, I'm not sure.

At this point my research don't help me and I lost "temporally" my phone.

Sorry for the long post, and thank you for your help.
 
Last edited:

lazyaf01

Senior Member
Aug 23, 2019
91
20
Hi, I need some help.

I've read the first 25 pages, and see some people have the same problem and find a issu. But not me.

In resume :
2 weeks ago, I have the 11.0.2.0 global version with TWRP and Magisk. All was fine.
I update the OTA 11.0.3.0 global and after reboot, I've lost TWRP and Magisk, but MIUI working.

Today, I try to install TWRP again. It was a little complicated, but it's OK. I can launch TWRP. But my problem is that. I can ONLY launch TWRP.

I try to install LineageOS 16.0-20190921 because I don't want Gapps and Xiaomi apps not interesting me (and I have a very good experience with my Nexus 5 with Cyanogenmod). Actually impossible to start OS. I can't install this.

This is some try :
Do all the first post (with wipe everything).
My TWRP version is in the link in the OP and launch with the .bat. (include "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img")
UPDATE - My TWRP version is 3.3.1-11
I've try install LineageOS with sideload and directly in the phone (with adb push command).
I've try with and without install Magisk.
I've try wipe dalvik after install LineageOS befor reboot system.

Actually, when I want to reboot system, TWRP note this : "No OS installed! Are you sure you wish to reboot?"
I've try to reinstall LineageOS, the same...
I've try to install MIUI 11.0.2.0, the same again (the 11.0.3.0 not work)...

I've notice this :
With adb sideload, the process finish on the phone before the 50% (and Total xfer: 1.00x on the prompt CMD). I have this message :"detected filesystem ext4 for /dev/block/bootdevice/by-name/system". Perhaps it's normal, I'm not sure.

At this point my research don't help me and I lost "temporally" my phone.

Sorry for the long post, and thank you for your help.
Try this:
Flash stock miui fastboot rom
Flash twrp
Boot to twrp
Wipe system, cache, dalvic cache
FORMAT DATA and type YES
Install lineage os
Flash gapps of choice
Reboot to system
Reboot to recovery
Install magisk
Reboot to system

Check if it works
 
  • Like
Reactions: Leeward_Fr

Leeward_Fr

Member
Oct 31, 2019
8
3
Try this:
Flash stock miui fastboot rom
Flash twrp
Boot to twrp
Wipe system, cache, dalvic cache
FORMAT DATA and type YES
Install lineage os
Flash gapps of choice
Reboot to system
Reboot to recovery
Install magisk
Reboot to system

Check if it works

Thanks.

What I do :
Flash via Rom stock Fastboot with this tuto.
After this, I can use normaly my phone with MIUI 11.0.1.0 Global. But, I lost the Unlock Satut.
So, re-install Mi Unlock and run it. Fortunately, not wait 7 days.
Flash TWRP 3.3.1-11 -> OK
Wipe Dalvik, Cache and System -> OK
Format Data -> OK
Install via sideload LineageOS 16.0-20190921 -> at 50% in prompt command, the phone finished.
No Gapps
Reboot system -> Warnig "No OS installed..." :crying:

I slide to reboot, and... I see a new screen... LineageOS load :victory:
I complete the first step and reboot to TWRP.
I flash Magisk and new reboot to OS.

Let's go to a long time full of install, copy and setup :fingers-crossed:

I'm so happy, thanks a lot Saboorpatel !!!

:laugh:
 
  • Like
Reactions: HelmutK.

HelmutK.

Senior Member
Jan 30, 2018
83
9
Thanks.

What I do :
Flash via Rom stock Fastboot with this tuto.
After this, I can use normaly my phone with MIUI 11.0.1.0 Global. But, I lost the Unlock Satut.
So, re-install Mi Unlock and run it. Fortunately, not wait 7 days.
Flash TWRP 3.3.1-11 -> OK
Wipe Dalvik, Cache and System -> OK
Format Data -> OK
Install via sideload LineageOS 16.0-20190921 -> at 50% in prompt command, the phone finished.
No Gapps
Reboot system -> Warnig "No OS installed..." :crying:

I slide to reboot, and... I see a new screen... LineageOS load :victory:
I complete the first step and reboot to TWRP.
I flash Magisk and new reboot to OS.

Let's go to a long time full of install, copy and setup :fingers-crossed:

I'm so happy, thanks a lot Saboorpatel !!!

:laugh:


Thats the way it works... :good:

---------- Post added at 02:45 PM ---------- Previous post was at 02:41 PM ----------

After Lineageos is finally working... what app are you using for uninstall google apps?

I'm using "system app remover" by Jumobile.. but if I'm uninstall something my system is crashing (Mi loop -> Fastboot mode).
 

Top Liked Posts

  • There are no posts matching your filters.
  • 60
    http%3A%2F%2Fi.imgur.com%2FzYkSW7S.png

    OFFICIAL soon
    Code:
    /*
     * I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...). 
     * Please do some research if you have any concerns about features included in the products you find here before flashing it! 
     * YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. 
     * Your warranty will be void if you tamper with any part of your device / software.
     * Same statement for XDA.

    LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.

    Download LineageOS:
    From my Gdrive

    Download TWRP:
    From another XDA thread

    What's working :
    DoubleTapToWake
    Boots
    Camera
    Pop up camera
    Camcorder
    Video Playback
    RIL (Calls, SMS, Data)
    Fingerprint
    Wi-Fi
    Bluetooth
    Audio
    Sensors
    Flash
    LED
    GPS/GNSS
    VoLTE

    Known issues:
    https://github.com/davinci-dev/android_device_xiaomi_davinci/issues

    Instructions :
    You need a PC with ADB & Fastboot available
    Download recovery
    Reboot to fastboot
    Run: fastboot flash recovery recovery.img
    Press volume & power up until you see TWRP logo
    Enter your password (if it prompts)
    Go to Wipe
    Select Advanced Wipe
    Select system & cache & internal storage and press wipe
    Go back (press back twice)
    1. ADB method:
    Select “Advanced”, “ADB Sideload”, then swipe to begin sideload.
    On the host machine, sideload the package using: adb sideload filename.zip (Replace filename with actual filename
    2.Directly install method:
    Copy ROM to internal storage.
    Select "Install",choose the ROM, then swipe to begin installation.
    You may flash OpenGapps and or Magisk
    Reboot

    Note: We have DRM L1 support,don't worry about Netflix.

    XDA:DevDB Information
    LineageOS, ROM for the Redmi K20 / Xiaomi Mi 9T

    Credits
    Lineage Team
    MoKee Team

    Contributors
    PIPIPIG233666,
    xdatman,
    minz1
    Demon000
    TheScarastic

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 4.x
    ROM Firmware Required: no
    (This is not a System image like other ROMs for davinci,this comes with built-in custom vendor)
    Source Code: Check it out at davinci-dev
    Based On: AOSP

    Version Information
    Status: Stable

    Created 2019-08-15
    Last Updated 2019-09-21
    27
    Today's changelog:
    -Add aptX support
    -Add dirac/HiFi support
    -Add display modes
    -Add QC location support
    -Add double tap to wake support
    -Add dynamic device model support
    -Add camera popup light support
    -Clean up unused binaries/services in /vendor
    -Enable auto brightness while dozing
    -Fix Mic in call
    -Fix overheat when charging
    -Reduce ROM package size to 929 MB
    -Add sepolicy denials (SELinux is still permissive since there's one problem that we can't solve yet)
    -Update brightness curve from Pixel 3a XL
    -Update fod icon color to match MIUI one
    -Use open source display HAL
    Join https://t.me/LineageDavinci
    20
    Today's changelog

    Fingerprint related issue has been fixed.
    Strange notch-like stuffs have been removed.
    Rounded-corner has been improved.
    Download Link
    More problems would be solved in the upcoming updates.
    Stay calm ,don't be anxious.
    13
    can you both do this somewhere else, please?
    12
    @PIPIPIG233666 Please PM when the you are ready to share the download link for a working ROM
    along with source code in compliance with GPLv2

    Thread Locked till then

    Funk Wizard
    Forum Moderator

    Edit: Thread Re-opened on OP Request