• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[UNOFFICIAL][ROM] LineageOS/Go 15.1 for Grand Prime [S920L/G530H/FZ/M/MU/P/T/T1/W]

Search This thread

Shiro39

Member
Dec 27, 2018
29
8
Still BETA :( Saad Story
but everything in this rom is stable, the rom is very stable. been using it for months and have no problem at all

---------- Post added at 12:35 PM ---------- Previous post was at 12:33 PM ----------

I have a Samsung SM-G530H (fortuna3g) variant, installed the fortuna3g ROM and GApps, everything seems to be okay but both of my sims does not work, it says "no sim card" even tho it has. How can I fix this?
try to factory reset your phone in twrp
 

Darth Bidder

Senior Member
May 11, 2017
134
20
Xiaomi Redmi 7
Is slow charging really a thing on this ROM? I have a G530-H.

I've been using RR 5.8.5 (Nougat) by Hassan and it charges quick.
But Vince's LOS and RR ROMS all have slow charging like it would still drain continuously while I'm using it mainly for browsing the menus even though it's already connected to the charger.

Any fixes/workarounds for that?
 
Last edited:

GnobarEl

Member
Mar 12, 2011
29
1
Hello All,

this image look really cool. My phone got a new life! However, some apps/games I use don't work on rooted phones and this image looks rooted. Any way to remove it?

Thanks.
 
Last edited:

rika7

Member
Jun 2, 2017
10
0
Just installed the Go Edition on my fortuna3g (the normal edition is very laggy for me)
Performance is ok, everything working as intended, thanks OP for the ROM!

But, 1 problem is I cannot reboot to recovery, but it still works with combination power+vol.up+home when the phone is turned off.
I have tried using advanced restart, Flashify, TWRP app, command line via terminal, all don't work and only do a normal reboot, not go to recovery.

Any solution for this?
 

GnobarEl

Member
Mar 12, 2011
29
1
Hello!

Thanks for your reply! However, still cant make it.

here is the challenge! I wanted this phone only for one thin. Play Pokemon Go, but i face a lot of issues:

The ROM by default is set to Permissive.
Pokemon will not run because is Permissive and not Enforcing;
I can use the The.SELinux.Switch to swap, but to run I need to root my phone.
I can root the phone and switch to Enforcing. Pokemong Go now will not run because the device is rooted.
With Super SU i can install the root, but the ROM will get again to Permissive and Pokemong Go will not run again!

Anything I do, I get the same result!

any feedback? Ideas, suggestions!?

Thanks!
 

Adromedemon

Senior Member
Aug 29, 2015
191
50
Hello!

Thanks for your reply! However, still cant make it.

here is the challenge! I wanted this phone only for one thin. Play Pokemon Go, but i face a lot of issues:

The ROM by default is set to Permissive.
Pokemon will not run because is Permissive and not Enforcing;
I can use the The.SELinux.Switch to swap, but to run I need to root my phone.
I can root the phone and switch to Enforcing. Pokemong Go now will not run because the device is rooted.
With Super SU i can install the root, but the ROM will get again to Permissive and Pokemong Go will not run again!

Anything I do, I get the same result!

any feedback? Ideas, suggestions!?

Thanks!

Don't use this rom.

But if you really want to,
>use magisk instead
>change selinux
>download xposed
>use root cloak
(untested but might work)
 
Last edited:
  • Like
Reactions: Rohid khan

Mohamedaltaweel

New member
Mar 8, 2019
1
0
Hi bro ,
am starting to try it for my first time to install custom rom to samsung , i dont have a twrp in my stock rom now , can i use the twrp attached with the rom and gapps to install this rom directly.
-With the new updates in the rom download files is the camera problem fixed or still not work?
Thanks for the work
 

AIDAROUZE

Member
Apr 4, 2016
40
12
djibouti
I definitely say thank you to vince and all the hard work he did for the grand prime SMG 530 H, I'm using the lineageos 15.1 build j23 and it is very stable and everything is working fine and smooth.I insist on the revival of my phone with this ROM:D:D:D
job well done vince.
 
Last edited:

Zippy Dufus

Senior Member
Feb 12, 2011
475
178

dzonili.021

Member
Feb 27, 2015
6
0
Becej
They appear to be updated now. Samsung MSM8916 Devices



Question, I see these changes Galaxy-MSM8916/scripts which appear to be repo picks. If I try a build, will these, or lack thereof, result in a working build?



It has been a long time since I tried a build and I think I remember that the video recording was broken again (but not sure).
Im hawing troble with los 15 for sm g530h
Can not but after flashing rom text displaed says somthing about kernel.
And im unable to flash stock android with odin.
Any sugestions for this.


Sent from my SM-N920C using Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 41
    2okPze5.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


    Code:
    ** Disclaimer
    I am not responsible if flashing this ROM bricks your
       phone or causes thermonuclear war  and ends the
        world as we know it. You have been warned.


    ROM Information


    Device Names

    Verify your device codename before downloading any firmwares or recovery images!
    Code:
    [B]SM-G530T/T1/W[/B] - [COLOR="DarkSlateBlue"][B]gprimelte[/B][/COLOR]
    [B]SM-G530P[/B] - [COLOR="DarkSlateBlue"][B]gprimeltespr[/B][/COLOR]
    [B]SM-S920L[/B] - [COLOR="DarkSlateBlue"][B]gprimeltetfnvzw[/B][/COLOR]
    [B]SM-G530MU[/B] - [COLOR="DarkSlateBlue"][B]gprimeltezt[/B][/COLOR]
    [B]SM-G530FZ[/B] - [COLOR="DarkSlateBlue"][B]gprimeltexx[/B][/COLOR]
    [B]SM-G530M[/B] - [COLOR="DarkSlateBlue"][B]fortunalteub[/B][/COLOR]
    [B]SM-G530H (XX)[/B] - [COLOR="DarkSlateBlue"][B]fortuna3g[/B][/COLOR]
    [B]SM-G530H (XC)[/B] - [COLOR="DarkSlateBlue"][B]fortunave3g[/B][/COLOR]


    Download


    Instructions


    If you are completely new to flashing custom ROMs and have no idea how to begin, start by downloading a TWRP image for your device from the links above and flash it using the ODIN tool (see below).

    You cannot flash a custom ROM over stock recovery, so downloading a custom recovery is the first thing you will need to do.





    If you are completely new to flashing custom ROMs and have no idea how to begin, start by downloading a TWRP image for your device from the links above and flash it using the ODIN tool (see below).

    You cannot flash a custom ROM over stock recovery, so downloading a custom recovery is the first thing you will need to do.

    Installation via recovery (TWRP/LineageOS Recovery)
    * Download a recent .zip file from the links above for your device.

    * Reboot into recovery mode [Press Power+Volume Up+Home].

    * Wipe your data and cache partition (equivalent to doing a Factory Reset)
    if you are coming from a stock ROM.


    * Either: Plug in your phone into your computer, copy the zip file to a location on your Internal or External Storage on a device, click Install on TWRP on your phone and locate the zip file in the phone, or:

    * Plug in your phone into your computer, and open Advanced->ADB Sideload on TWRP on your phone and swipe the slider to enter sideload mode.
    Then open a command prompt/terminal on your computer in the folder you put the file by Shift-Clicking (Shift+Right Click) and selecting "Open Command Prompt/Terminal Here" (you will need to have adb installed) and type:

    adb sideload name_of_zip.zip

    to sideload the file. Replace name_of_zip.zip with the name of the file. If you are running Linux you may need to type adb kill-server and use sudo adb sideload if you get an `Insufficient Permissions` error.

    * Download and flash GApps in the same way.


    How to provide logcats

    Under Windows:


    Code:
    [B]* Install samsung device drivers and then
     the adb utils from here:[/B]
    
    [url]https://forum.xda-developers.com/showthread.php?t=2588979[/url]
    
    [b]* Then enable developer mode, connect your phone to usb,
     and from [B]cmd[/B] paste this command:[/b]
    
    [I]adb logcat > %userprofile%/Desktop/logcat.txt[/I]
    
    [b]then try to reproduce the bug.[/b]
    
    [b]* The logcat file will be on your desktop.[/b]



    Under Linux:


    Code:
    [b]* Install the adb utils from your distribution's
     package manager and execute the command:[/b]
    
    [I]adb logcat > ~/logcat.txt[/I]
    
    [b]then try to reproduce the bug.[/b]
    
    [b]* The logcat file will be on your home directory.[/b]

    * Create a bug report at https://bugs.msm8916.com/ and paste the logcat there.

    * If you cant connect the device through adb on windows because the drivers, connect the device over wifi, enable adb over network on the quick setting tiles, and type:

    Code:
    adb connect [ip address here]

    And then the adb logcat command for windows.



    FAQ

    Q: Are you taking device requests?
    A: No.

    Q: Are you accepting feature requests?
    A: No.

    Q: Can you make XXX ROM as well as LOS?
    A: No.

    Q: Can I throw money at you?
    A: Most certainly. Donations are always welcome.

    XDA:DevDB Information
    [UNOFFICIAL][ROM] LineageOS/Go 15.1 for Grand Prime [S920L/G530H/FZ/M/MU/P/T/T1/W], ROM for the Samsung Galaxy Grand Prime

    Contributors
    vince2678, minz1, vlw, Danil_e71
    Source Code: https://github.com/Galaxy-MSM8916

    ROM OS Version: 8.x Oreo
    ROM Kernel: Linux 3.10.x
    ROM Firmware Required: >= 4.4 (KitKat)
    Based On: LineageOS

    Version Information
    Status: Beta

    Created 2017-11-12
    Last Updated 2018-09-03
    11
    Important

    If this is your first time flashing O, you will need to install the latest unofficial TWRP image for your device from the links above before flashing a zip image, otherwise installation of a zip will invariably fail.

    For SM-G530P users, use the gprimelte unofficial twrp instead of the gprimeltespr one.
    For SM-S920L users, use the gprimeltetfnvzw official twrp instead of the unofficial gprimeltetfnvzw one.
    10
    What works

    Code:
    [B]
    * RIL (in-call audio, messaging, [I]data possibly[/I])
    * Bluetooth (including audio)
    * WiFi
    * Audio (music, etc)
    * Camera (including video recording)
    * Flash
    * Sensors
    * GPS
    [/B]

    Known Issues

    Code:
    [COLOR="RoyalBlue"][B]SM-G530P | SM-S920L [/B][/COLOR]
    * [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] In-call audio is buggy (there's a persistent ring tone during calls).[/B]

    Code:
    [COLOR="RoyalBlue"][B]All devices[/B][/COLOR]
    * [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] NFC does not work. This is indefinitely broken[/B]
    * [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] Encryption does not work. This is indefinitely broken[/B]

    Changelog

    Code:
    [COLOR="Red"][B]09/02/2018[/B][/COLOR]
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Core control has been disabled permanently, in-kernel. [/B]
    
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] NFC may (or may not) be working this build on capable devices.
       This is Untested. [/B]
    
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Rebased lineage-15.1 branches in repos. This is mostly
       for our benefit; just to tidy up the repos and make commit history more descriptive,
       accurate and give proper credits to commit authors. [/B]
       
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Camera recording should be working again.
       This was broken due to upstream android security change. [/B]
    
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Reworked zram support in ROM. There are now two zram properties:
    	[I]ro.config.zram.enabled[/I] and [I]ro.config.zram.size[/I]
    	Set [I]ro.config.zram.enabled[/I] [I]true[/I] to enable zram;
    	and [I]ro.config.zram.size[/I] to set the size of the zram disk.
    
      If you set this too large the system will slow down. You can also just use a zram
      zip from the download server to do this automatically.[/B]

    Code:
    [COLOR="Red"][B]08/12/2018[/B][/COLOR]
    * [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] Camera recording is broken.
       This is due to upstream android security change. [/B]
    
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Reworked zram support in ROM. There are now two zram properties:
    	[I]ro.config.zram.enabled[/I] and [I]ro.config.zram.size[/I]
    	Set [I]ro.config.zram.enabled[/I] [I]true[/I] to enable zram;
    	and [I]ro.config.zram.size[/I] to set the size of the zram disk.
    
      If you set this too large the system will slow down. You can also just use a zram
      zip from the download server to do this automatically.[/B]
    
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Enabled zram by default for low-ram (1GiB) devices [/B]


    Code:
    [COLOR="Red"][B]07/26/2018[/B][/COLOR]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Camera recording should be working normally again [/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] sdcard (vfat/fat32) should work fine in recovery [/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Some stutter and lag issues have been fixed 
         (tweaked core_control, among others) [/B]
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] exFAT support has been restored [/B]
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Re-enabled QS transparency [/B]
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Removed go-gapps from lineage-go [/B]
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] Reduced kernel logcat buffer size from 512KB to 256KB (slight RAM saving)[/B]
    * [B][[COLOR="Blue"]NOTE[/COLOR]][/B] [B] zram has been disabled by default. If you want this, you can set the 
        property [I]ro.config.zram[/I] to true[/B]

    Code:
    [COLOR="Red"][B]06/03/2018[/B][/COLOR]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Frequency scaling issues should be fixed (stutter after suspend/resume should be gone). [/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] In-call audio should be fixed on multi sim devices. [/B]

    Code:
    [COLOR="Red"][B]06/01/2018[/B][/COLOR]
    * [B][[COLOR="Blue"]MISC[/COLOR]][/B] [B] Go GApps are now embedded in LineageOS Go builds. [/B]

    Code:
    [COLOR="Black"][B]05/28/2018[/B][/COLOR]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Frequency scaling should be fixed (improved power savings) [/B]

    Code:
    [COLOR="Black"][B]05/21/2018[/B][/COLOR]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Thermal engine is now working proper (for better temperature control) [/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Hidden Wi-Fi networks should now be connectable/reachable [/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Power hal is now working proper (resulting in improved battery usage)[/B]
    * [B][[COLOR="Blue"]MISC[/COLOR]][/B] [B] RIL includes updated [/B]
    * [B][[COLOR="Blue"]MISC[/COLOR]][/B] [B] Misc. kernel updates (sdcardfs, binder) [/B]

    Code:
    [COLOR="Black"][B]04/27/2018[/B][/COLOR]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Brightness adjustment should be fixed for the fortuna3g/SM-G530H[/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] In-call audio should be working for the second sim on dual-sim devices[/B]

    Code:
    [COLOR="Black"][B]04/24/2018[/B][/COLOR]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Sim detection should be fixed for fortuna* devices.[/B]

    Code:
    [COLOR="Black"][B]04/23/2018[/B][/COLOR]
    * [B][[COLOR="Green"]MISC[/COLOR]][/B] [B] Added fortuna* devices.[/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Video recording now works[/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Bluetooth audio is fully working[/B]

    Code:
    [COLOR="Black"][B]13/03/2018[/B][/COLOR]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] In-call audio should be working in the latest build[/B] 
    
    * [B][[COLOR="Orange"]PARTIAL FIX[/COLOR]][/B] [B] Camera flash and previews should be working, however, saving pictures or videos will not work. [/B]

    Code:
    [COLOR="Black"][B]06/02/2018[/B][/COLOR]
    * [B][[COLOR="Red"]REGRESSION[/COLOR]][/B] [B] In-call audio is broken [/B]

    Code:
    [COLOR="Black"][B]20/11/2017[/B][/COLOR]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] WiFi is working[/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] RIL functions (Calling, texting, data) should be working, including in-call audio [/B]
    * [B][[COLOR="Green"]FIX[/COLOR]][/B] [B] Music and video playback should be working [/B]

    Code:
    [COLOR="Black"][B]12/11/2017[/B][/COLOR]
    * [B][[COLOR="Green"]NOTE[/COLOR]][/B] [B] First working image built. [/B]

    8
    I've regenerated all twrp images - the sdcard (fat32/vfat) issue should be fixed.

    These are dated '20180725' and are available on the download server (link in OP).
    6
    Yeah.. That would be silly, as the error says.

    === Edited ===

    I'll elaborate. I don't mean to sound rude in my previous post.

    The kernel and all critical system services need some memory, both static (for the kernel code, application code, etc) as well as space for accounting or anything variable (page tables and other data structures).

    The system will absolutely let you set a ridiculous size for zram, no doubt. But since zram is swap (with the highest possible swapping priority set), the kernel will swap out any pages it can if it has the chance. Since there'll be so much space in zram, the kernel will eventually try to swap out more than is tenable (zram is in *RAM*, so past a certain point swapping a page from RAM to RAM will have no saving, even with compression) and thrashing will result, making the system grind to a halt.

    ZRAM also does not automatically clean up freed up space. So, for example, if I make a 1GB zram, format it with a file system, say ext4, and fill it up with a zeroed file, then remove the file, all that space will still be marked as allocated in RAM in the kernel, even if the file system says it's free, since the kernel doesn't know how zram works, nor zram how any underlying data structure placed on it works. You will need to deactivate the zram disk (and thus deallocate the memory) to free up that space.

    So, when you get that warning, don't ignore it and go set the size manually anyways using kernel adiutor or something else. It's a cause for trouble.

    And when I change something in the ROM, say disable zram for all devices, it's for reasons like this. Me, Sean and Emery were very much against this and other decisions by Dyneteve, like core control, because forcing optimizations like this on users is very bad. Trust me on this. So the compromise I reached was to leave them there, but disabled.

    I have a degree in these things; I'm a computer scientist, favouring low level system design and programming, so trust me when I make a decision like this.

    === Edited ===