[UPD] Super-Pack of Google Camera MODs for OnePlus 8 Pro!

[mrdope16]

Can you please post those pictures on the same website I used in my previous post? Your shots are resized and the full EXIF data is not accessible, so I can't check anything. Thanks.

Gofile - Free Unlimited File Sharing and Storage

Gofile is a free, secure file sharing and storage platform. With unlimited bandwidth and storage, you can easily store and share files of any type without any limits. Our advanced features, such as CDN support and password protection, make Gofile the ideal choice for individuals and businesses...

gofile.io

 

[Surfeur-des-Reves]

Gofile - Free Unlimited File Sharing and Storage

Gofile is a free, secure file sharing and storage platform. With unlimited bandwidth and storage, you can easily store and share files of any type without any limits. Our advanced features, such as CDN support and password protection, make Gofile the ideal choice for individuals and businesses...

gofile.io

Screenshot-01 hosted at ImgBB

Image Screenshot-01 hosted in ImgBB

ibb.co

Screenshot-02 hosted at ImgBB

Image Screenshot-02 hosted in ImgBB

ibb.co

As you can see, the EXIF says F/2.44, not F/1.79, so if I'm not mistaken, this can't be from the main back sensor.

 

[mrdope16]

Screenshot-01 hosted at ImgBB

Image Screenshot-01 hosted in ImgBB

ibb.co

Screenshot-02 hosted at ImgBB

Image Screenshot-02 hosted in ImgBB

ibb.co

As you can see, the EXIF says F/2.44, not F/1.79, so if I'm not mistaken, this can't be from the main back sensor.

Yes I checked that too before, but why is the photo over sharpened? I'm not much a config guy, but I really prefer 4.7 Tele look more than 5.1
Can you mix 4.7 tele to 5.1? just to test it?

 

[Surfeur-des-Reves]

Yes I checked that too before, but why is the photo over sharpened? I'm not much a config guy, but I really prefer 4.7 Tele look more than 5.1
Can you mix 4.7 tele to 5.1? just to test it?

It all depends on the settings applied in-app. Anything you wish to change, you can easily do it from the RamPatcher settings. Once you reach the settings you like, you can simply save your own custom xml file and shoot happily with it (I personally prefer my shots a bit sharp, with as little grain & noise as possible, but that's my very personal preferences)

 

[mrdope16]

It all depends on the settings applied in-app. Anything you wish to change, you can easily do it from the RamPatcher settings. Once you reach the settings you like, you can simply save your own custom xml file and shoot happily with it (I personally prefer my shots a bit sharp, with as little grain & noise as possible, but that's my very personal preferences)

I did shoot them without changing anything.
Literally 4.7 did shoot very good and after I updated to 5.1 It got worse.
I just want to merge tele config from 4.7 to 5.1 if that's possible.

 

[Surfeur-des-Reves]

I did shoot them without changing anything.
Literally 4.7 did shoot very good and after I updated to 5.1 It got worse.
I just want to merge tele config from 4.7 to 5.1 if that's possible.

Merging is not possible, unfortunately, as there is a risk of breaking the whole config and make the app crash, but you can simply copy/note all settings from V4.7 Tele and manually change them in V5.1. 'Better' and 'worse' is clearly a personal opinion here, as I personally prefer Tele shots from V5.1.

 

[mrdope16]

Merging is not possible, unfortunately, as there is a risk of breaking the whole config and make the app crash, but you can simply copy/note all settings from V4.7 Tele and manually change them in V5.1. 'Better' and 'worse' is clearly a personal opinion here, as I personally prefer Tele shots from V5.1.

quality comparsion between jeus and ur config.

Gofile - Free Unlimited File Sharing and Storage

Gofile is a free, secure file sharing and storage platform. With unlimited bandwidth and storage, you can easily store and share files of any type without any limits. Our advanced features, such as CDN support and password protection, make Gofile the ideal choice for individuals and businesses...

gofile.io

as you see on your config shots are bit oversharpened and quality is also worse.

 

[Surfeur-des-Reves]

quality comparsion between jeus and ur config.

Gofile - Free Unlimited File Sharing and Storage

Gofile is a free, secure file sharing and storage platform. With unlimited bandwidth and storage, you can easily store and share files of any type without any limits. Our advanced features, such as CDN support and password protection, make Gofile the ideal choice for individuals and businesses...

gofile.io

as you see on your config shots are bit oversharpened and quality is also worse.

Your second shot is also blurry, not focused correctly, probably because you used some HQ or Ultra xml without being completely stabilized. Anyway, if you're not happy with it, please refrain from using it, as simple as that.

 

[mrdope16]

Your second shot is also blurry, not focused correctly, probably because you used some HQ or Ultra xml without being completely stabilized. Anyway, if you're not happy with it, please refrain from using it, as simple as that.

Do I look like I'm complaining? It's my feedback to make it better lol? If you don't want the feedback aight, good luck making your mod better alone..

edit: the camera was steady on the window, none of the shots are blurry lol.
I was using your HQ config with night mode and both set to far focus.

 

[Surfeur-des-Reves]

Do I look like I'm complaining? It's my feedback to make it better lol? If you don't want the feedback aight, good luck making your mod better alone..

edit: the camera was steady on the window, none of the shots are blurry lol.
I was using your HQ config with night mode and both set to far focus.

You do. Anyway, thank you for your contribution then.

 

[karib97]

Hi, I'm on A12. IN2025_11_C.36. Cam is working ! Video on IR is crashing... I'm not rooted, only bootloader unlocked. thank you for your time and efforts

 

[devsk]

Do I look like I'm complaining? It's my feedback to make it better lol? If you don't want the feedback aight, good luck making your mod better alone..

edit: the camera was steady on the window, none of the shots are blurry lol.
I was using your HQ config with night mode and both set to far focus.

@mrdope16 You can continue to use the XML from 4.7. I think that's a good solution. Why does that not work for you? What is it from 5.1 that you want?

If I were you, and if 4.7 worked for me, I will continue to use it and enhance it myself for areas I want and export as my own XML. You can do that starting with 5.1 settings as well and converge from the other direction. Both approaches are good.

 

[Surfeur-des-Reves]

@mrdope16 You can continue to use the XML from 4.7. I think that's a good solution. Why does that not work for you? What is it from 5.1 that you want?

If I were you, and if 4.7 worked for me, I will continue to use it and enhance it myself for areas I want and export as my own XML. You can do that starting with 5.1 settings as well and converge from the other direction. Both approaches are good.

Couldn't have phrased it any better. Thanks!

 

[Surfeur-des-Reves]

Oopss, I did it again...

NiCkAM8PRO V6 (LMC R15 GCam) Custom Pack (APK + Profiles): https://gofile.io/d/H33jkl

Changelog & Suggestions:

There are just too many changes in this new release to keep the previous V5x iteration, so here comes V6, with lots of optimizations and improvements in every app department. It would just take too long to mention every modification done to it, but after hours spent working on this new version, I believe it should bring even better noise reduction, speed and overall image quality (compared to previous release).

This time, only 2 custom XMLs are provided: FAST & HQ! They are mostly similar but 'FAST' brings instant shots (using Zero-Shutter Lag -ZSL- mode by default), very fast processing and 12MP image resolution (about 2-4MB per shot), while 'HQ' comes with HDR+Enhanced by default (with as low as 1/5s Exposure time and 20 HDR frames, so be steady for a second or two if shooting at night / in low light!), increased image resolution (6 to 12MB per shot) and therefore some slightly longer image processing time. JPEG compression is kept at 97% for both profiles, as it is a sweet spot in terms of quality / image size.

You can also use 'FAST' xml and activate 'HDR+Enhanced' function in the Quick Settings panel, which should limit Exposure time to 1/15s, for slightly better quality while remaining fast to shoot & process. This is actually the XML that most people should use, but if for any reason you need to use 'HQ', just make sure you are steady / use some stable surface (or increase Exposure time to 1/10s to 1/13s). However, if you use a tripod or a perfectly stable surface, you can even decrease Expo time to 'Max'...

Everything is user-adjustable, especially the exposure time, which can be quickly accessed with some long-press on the Gallery icon. Same goes for the number of HDR frames, which can be reduced or increased (if you use HDR+Enhanced mode).

If your shots are too bright, make use of the Exposure Compensation function (the 'sun' icon) or simply touch the viewfinder area and manually adjust your exposure using the slider.

Almost everything should work, including front & back video from all sensors. There is still no distortion correction for UW sensor, but this is not something that can be solved on my side, unfortunately.

For those with a rooted device / magisk installed (OOS 11/12/13 or custom ROM), you might get some better performance (especially if you get stuck at 1/100s in ZSL mode and wish to get as low as 1/15s) after flashing this magisk module (all credits go to those who developed it, not me): https://www.celsoazevedo.com/files/android/p/camera-unlocker-oneplus-8-9r/?v1-2

As always, take this new release as it is, or leave it, but please remember this is all done for free, took countless hours of (my) time to create and is in no way made by a team of experienced developers. As for anything in life, there is surely room for improvement, and I strongly encourage users to adapt my work to their liking. Please remember that "if you can't say anything nice about something, just don't say anything at all", or at least try to be nice when reporting bugs or suggestions for improvement. And one last thing: we all have different preferences when it comes to photography.

Have fun with it!

 

[Clark789]

Thank you, Surfeur, for the constant development and your kind support!!! This is not a matter of course...

Cheers
Clark

 

[luigibell78]

hey.

finally got around to installing this gcam on my OP8 pro. so far it's quite good. keep up the good work!

p.s. any possibility in customizing the config file to eliminate all the setting/buttons and options all around the viewfinder? it's very cluttered and distracting sometimes. a clean simple viewfinder but with the same image quality/processing.

also...when trying selfie portrait on "res" for max resolution I still get 4.1 megapixel. is this a normal output on selfie portrait?

 

[Surfeur-des-Reves]

hey.

finally got around to installing this gcam on my OP8 pro. so far it's quite good. keep up the good work!

p.s. any possibility in customizing the config file to eliminate all the setting/buttons and options all around the viewfinder? it's very cluttered and distracting sometimes. a clean simple viewfinder but with the same image quality/processing.

also...when trying selfie portrait on "res" for max resolution I still get 4.1 megapixel. is this a normal output on selfie portrait?

Hello there,

Thanks for the nice feedback, for your support, and for the suggestions as well. Appreciated.

I'm about to release new V6.1 which will remove 2 'not-so-useful' buttons on the left side. Unfortunately, I can't remove any other icon as they may be useful to some people (me included). If you still want to remove more of them, simply go to the App settings, then Processing functions, Viewfinder settings. Anything can be disabled/enabled from there.

Concerning the 'Res' icon, it allows to 'digitally' upscale the resolution of all sensors, including front one, which should then go from 4.1MP (1748x2328 pixels) to 16.3MP (3496x4656 pixels). However, this function does not seem to work when using 'Portrait' mode (only in 'Normal' and 'Night' modes), not only for the front but also the back sensors. It might be a limitation from LMC mod, or something in the -Dev?- settings that needs to be activated (if so, then I'm curious to know what it is).

Cheers.

 

[Surfeur-des-Reves]

NiCkAM8PRO V6.1 (LMC R15 GCam) Custom Pack (APK + Profiles): https://gofile.io/d/gtsmk6

Changelog & Suggestions:

Several small optimizations here and there. Shots will be a tiny bit more contrasted, with less artefacts. AWB should bring more noticeable results for the back main sensor, when activated (at night, in low-light and/or under artificial lighting conditions). 'IR' sensor should bring some slightly better quality results as well (well, as long as you use it under -bright- daylight and keep in mind it's just a -crappy- 5MP sensor).

This new release also comes with 2 custom XML files: FAST & HQ! They are mostly similar but 'FAST' brings instant shots (using Zero-Shutter Lag -ZSL- mode by default), very fast processing and 12MP image resolution (about 2-4MB per shot), while 'HQ' comes with HDR+Enhanced by default (with as low as 1/10s Exposure time and 20 HDR frames, so be steady for a second or two if shooting at night / in low light!), increased image resolution (6 to 12MB per shot) and therefore some slightly longer image processing time. JPEG compression is kept at 97% for both profiles, as it is a sweet spot in terms of quality / image size.

You can also use 'FAST' xml and activate 'HDR+Enhanced' function in the Quick Settings panel, which should limit Exposure time to 1/15s, for slightly better quality while remaining fast to shoot & process. This is actually the XML that most people should use, but if for any reason you need to use 'HQ', just make sure you are steady. If you use a tripod or a perfectly stable surface, you can even decrease Expo time to 1/5s, 1/2s, or even 'Max'. The longer the exposure time, the better the results (lower noise and higher quality)!

Everything is user-adjustable, especially exposure time, which can be quickly accessed by long-pressing the Gallery icon. Same goes for the number of HDR frames, which can be reduced or increased (if you use HDR+Enhanced mode).

If your shots are too bright, make use of the Exposure Compensation function (the 'sun' icon) or simply touch the viewfinder area and manually adjust your exposure using the slider.

Almost everything should work, including front & back video from all sensors. There is still no distortion correction for UW sensor, but this is not something that can be solved on my side, unfortunately. Digital Interpolation ('Res' function) does not work when using Portrait mode as well.

For those with a rooted device / magisk installed (OOS 11/12/13 or custom ROM), you might get some better performance (especially if you get stuck at 1/100s in ZSL mode and wish to get as low as 1/15s) after flashing this magisk module (all credits go to those who developed it, not me):
https://www.celsoazevedo.com/files/android/p/camera-unlocker-oneplus-8-9r/?v1-2

Have fun with it!​

 

[luigibell78]

NiCkAM8PRO V6.1 (LMC R15 GCam) Custom Pack (APK + Profiles): https://gofile.io/d/gtsmk6

Changelog & Suggestions:

Several small optimizations here and there. Shots will be a tiny bit more contrasted, with less artefacts on the shots and slightly more 'skin-friendly' as well. AWB should bring more noticeable results for the back main sensor, when activated. 'IR' sensor should bring some slightly better quality results as well (well, as long as you use it under -bright- daylight and keep in mind it's just a -crappy- 5MP sensor).

This new release also comes with 2 custom XML files: FAST & HQ! They are mostly similar but 'FAST' brings instant shots (using Zero-Shutter Lag -ZSL- mode by default), very fast processing and 12MP image resolution (about 2-4MB per shot), while 'HQ' comes with HDR+Enhanced by default (with as low as 1/10s Exposure time and 20 HDR frames, so be steady for a second or two if shooting at night / in low light!), increased image resolution (6 to 12MB per shot) and therefore some slightly longer image processing time. JPEG compression is kept at 97% for both profiles, as it is a sweet spot in terms of quality / image size.

You can also use 'FAST' xml and activate 'HDR+Enhanced' function in the Quick Settings panel, which should limit Exposure time to 1/15s, for slightly better quality while remaining fast to shoot & process. This is actually the XML that most people should use, but if for any reason you need to use 'HQ', just make sure you are steady. If you use a tripod or a perfectly stable surface, you can even decrease Expo time to 1/5s, 1/2s, or even 'Max'. The longer the exposure time, the better the results (lower noise and higher quality)!

Everything is user-adjustable, especially exposure time, which can be quickly accessed by long-pressing the Gallery icon. Same goes for the number of HDR frames, which can be reduced or increased (if you use HDR+Enhanced mode).

If your shots are too bright, make use of the Exposure Compensation function (the 'sun' icon) or simply touch the viewfinder area and manually adjust your exposure using the slider.

Almost everything should work, including front & back video from all sensors. There is still no distortion correction for UW sensor, but this is not something that can be solved on my side, unfortunately. Digital Interpolation ('Res' function) does not work when using Portrait mode as well.

For those with a rooted device / magisk installed (OOS 11/12/13 or custom ROM), you might get some better performance (especially if you get stuck at 1/100s in ZSL mode and wish to get as low as 1/15s) after flashing this magisk module (all credits go to those who developed it, not me):
https://www.celsoazevedo.com/files/android/p/camera-unlocker-oneplus-8-9r/?v1-2

Have fun with it!​

View attachment 5810361

great work.

is it necessary to install the whole new camera APK or is it just the config files that have been changed?

 

[Surfeur-des-Reves]

great work.

is it necessary to install the whole new camera APK or is it just the config files that have been changed?

If you have been using previous V6.0 release, then there is no need to reinstall the same APK, the one included in V6.1 is the same. Only the XML files were updated.